Toughlift ML Series Materials Lifter - 4 Capacity/Height Options

Manual Material Lift

The innovative new range of ToughLift® manual material lifts sets new standards in ease-of-use and equipment durability.

The ToughLift® ML series of materials lifters is specifically designed and specified to be low maintenance and have a low whole life cost.

It is quick and simple to set up, and its very strong, compact chassis fits through a standard single doorway.

Key Features: Toughlift ML

The innovative new range of ToughLift® Material Lifts includes the following features as standard:

• Heavy-duty construction.
• Quick and simple setup; no tools required.
• Portable compact design for easy transport and storage.
• Anodised lightweight aluminium telescoping mast:
  • Corrosion resistant, as the anodic film is totally impermeable.
  • Abrasion-resistant.
  • Anodised aluminium components are 100% recyclable.
• The mast safety braking system holds the carriage and lifting column(s) in position if the cable becomes loose or breaks.
• Extra-wide aluminium first pulley wheel improves the laying of the cable on the winch drum.
• Heavy-duty castors with non-marking tyres.
• Braked swivel castors with foot-operated brake on the side and bolted foot-operated straight-line lock to aid loading for transport or moving in a straight line on site.
• Long loading wheels/handles shaft so that the mast is horizontal when the machine is laid back for transport.
• Loading wheels with sealed bearings rotate with ease.
• Transport wheels with sealed bearings.
• Tube welded through the Standard Forks and Boom to prevent the drop nose pin jamming when fitting to the carriage.
• E-coated and then powder-coated steel fabrications fitted with silicone rubber end caps.
• Colour-coded decals use 3M high-adhesion strength outdoor-rated film and inks, and can be jet-washed clean on a moderate pressure.
• Manufacturers plates with serial numbers riveted to the chassis of the machine and fitted to the load handling attachments to aid traceability for LOLER thorough examinations (UK only, regulations in other countries vary).
• Stainless-steel roller guards.
• Stainless-steel retaining pins.
• Robust pull rings on front legs and handles/loading wheels retaining pins.
• Bushed joints across the machine.
• Stainless-steel fixings.
• Easy to wind dual-handled manual winch with brake to hold the load in place.
• Winch handles with ergonomic grip design.
• Standard Forks can be fitted up or down in the carriage on the mast.
• All machines and load handling attachments are supplied with both EU and UKCA Declarations of Conformity.

Hard wearing aluminium mast pulley wheels.

Cable guard with operational and safety decal.

Carriage lock operates in all machine configurations.

Hoisting and winching anchor.

Robust waterproof document holder.

Spirit level to aid the operator to level the chassis.

Specifications and Performance

(1) - Excluding load handling attachments.
(2) - With Standard Forks only.
(3) - Measurement from the ground to the bottom of the lifting shackle.

Load Capacities

Accessory Weights and Dimensions

(4) - Length is measured from the front of the carriage to the end of the load handling attachment.

(5) - Adds 16.1cm, 39.9cm, or 63.1cm to the length of the Standard Forks.