Yoke Bolt-on Tie Down Lifting Point, Grade 8, EN1677-1 - 1000kg to 5000kg
Model:
DAB / BOTD-2826
Manufacturing Standard: EN1677-1
More from:
The Yoke Bolt down load ring is available in three different sizes and capacities 1, 3 and 5 tonne SWL. the load ring can be used for lifting equipment (not people) or as a lashing down anchorage point for cargo restraint purposes.
Yoke are a quality lifting equipment manufacturer and relatively new to the UK lifting market place though are probably equal in quality to any other manufacturer.
Designed with spring, stop at any angle supplied without bolt
Pivots 180° and allows side load lifting.
Manufactured from forged alloy steel, quenched and tempered.
Manufactured and tested in accordance with EN1677-1.
Load rated parts are 100% magnaflux crack detected.
Individual forged parts are traceable to Test Certification.
Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended.
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
Design Factor 5 : 1
All YOKE lifting points meet or exceed all the requirements of ASME B30.26.
Usage Examples
Designed to be semi-permanent lashing or lifting point
Suitable for attachment to lifting beams and spreader beams
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Yoke DAB Bolt-down Swivel Lifting / Lashing Point
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
The Yoke Bolt down load ring is available in three different sizes and capacities 1, 3 and 5 tonne SWL. the load ring can be used for lifting equipment (not people) or as a lashing down anchorage point for cargo restraint purposes.
Yoke are a quality lifting equipment manufacturer and relatively new to the UK lifting market place though are probably equal in quality to any other manufacturer.
Designed with spring, stop at any angle supplied without bolt
Pivots 180° and allows side load lifting.
Manufactured from forged alloy steel, quenched and tempered.
Manufactured and tested in accordance with EN1677-1.
Load rated parts are 100% magnaflux crack detected.
Individual forged parts are traceable to Test Certification.
Supplied without bolts; usage of Grade 10.9 or Grade 12.9 bolts is recommended.
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
Design Factor 5 : 1
All YOKE lifting points meet or exceed all the requirements of ASME B30.26.
Usage Examples
Designed to be semi-permanent lashing or lifting point
Suitable for attachment to lifting beams and spreader beams
