RUD PSA VRS Rotating Fall Arrest Anchorage Eye Bolts, Options For 1 or 2 Person
RUD PSA VRS Rotating Fall Arrest Anchorage Eye Bolts, Options For 1 or 2 Person
Rotating Fall Protection Anchorage point
Model:
Rud PSA VRS / RRFA-5020
More from:
RUD Swivel Fall Arrest Eye Bolt
The Rud PSA-Fall arrest anchor points are not lifting points in a conventional sense. They are used as anchor points for personal fall arrest systems (PSA) acc. to EN 363:2008. After installation, harnesses can be attached to them via. a safety lanyard or a fall arrest block (intermediate karabiners or alike may also be required - if they aren't part of the lanyard or fall arrestor).
These products are certified by a notified institution of DGUV. DGUV-test certificate No.: PS17060031, PS17060032 and PS17060033 with the evidence of the in OSHA 1926.502:2001/01 paragraph (d)(15) and DIN EN 50308:2005 chapter 4.5 for lifting points required forces. They are corresponding to an "anchor point" according to European edict 2016/425 and the DIN 795:2012-10 resp. DIN CEN / TS 16415:2013-4 and they are marked with CE and the number of load-bearing persons (1 or 2 persons).
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: RUD PSA VRS Rotating Fall Arrest Anchorage Eye Bolts, Options For 1 or 2 Person
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
RUD Swivel Fall Arrest Eye Bolt
The Rud PSA-Fall arrest anchor points are not lifting points in a conventional sense. They are used as anchor points for personal fall arrest systems (PSA) acc. to EN 363:2008. After installation, harnesses can be attached to them via. a safety lanyard or a fall arrest block (intermediate karabiners or alike may also be required - if they aren't part of the lanyard or fall arrestor).
These products are certified by a notified institution of DGUV. DGUV-test certificate No.: PS17060031, PS17060032 and PS17060033 with the evidence of the in OSHA 1926.502:2001/01 paragraph (d)(15) and DIN EN 50308:2005 chapter 4.5 for lifting points required forces. They are corresponding to an "anchor point" according to European edict 2016/425 and the DIN 795:2012-10 resp. DIN CEN / TS 16415:2013-4 and they are marked with CE and the number of load-bearing persons (1 or 2 persons).
