Tractel Ballsafe Removable Fall Arrest Eye Anchor Point Eye Bolt
Tractel Ballsafe Removable Fall Arrest Eye Anchor Point Eye Bolt
Tractel Removeable Eye Bolt. Conforms to EN795
Model:
Tractel BallSafe anchor / REB-2205
More from:
The BALLSAFE anchoring point or ball pin is an anchoring point provided to the user, It can connect to the anchoring sleeve by manually applying pressure to the ball unlocking system.
Features
The Ballsafe anchoring point is designed for discrete, esthetic installation on architectural structures.
It is also used on sites where the anchoring point must be mobile so that it does not interfere with operation of machines.
The Ballsafe anchoring point is formed by two main components: The peg or female sleeve : this is installed permanently in the structure.
It can be used sealed in concrete, or sandwiched in a metal structure.
Once in place, the sleeve is discrete and cannot be used without a Ballsafe anchoring point.
This device is easy to use and allows the user to easily move and connect with no difficulty.
The female sleeve is simple and fast to install, No special tool is required.
The sleeve is simple to test before it is put into use by means of a Dynaplug dynamometer set for 500kg for 15 seconds.
The Ballsafe is approved per EN795 class A for the sleeve and per EN795 class B for the ball pin.
The ball pin is supplied with a plastic sealing cover protecting the system from water and soiling.
Technical characteristics
Female sleeve
Installation in solid structure
The sleeve must be installed in a structure capable of withstanding a force of 1T.
The sleeve must be secured by a chemically sealed dowel satisfying the specification requirements.
The minimum size of the support must be 170 mm.
The sleeve must never be installed at less than 85 mm from the edge of the structure.
The sleeve must never protrude by more than 30 mm from the surface of the drilling plane.
Dowel dimensions: M22 x100
Drilling dimensions: Ø30 x 105
Material: stainless steel
Weight: 210 g
Installation in steel structures
Drilling dimensions : Ø30
Minimum thickness of support : 10 mm
Ball Pin / Block Plug / Eye Bolt
Material : stainless steel body, anchor rings made of bichromate steel
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Tractel Ballsafe Removable Fall Arrest Eye Anchor Point Eye Bolt
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
The BALLSAFE anchoring point or ball pin is an anchoring point provided to the user, It can connect to the anchoring sleeve by manually applying pressure to the ball unlocking system.
Features
The Ballsafe anchoring point is designed for discrete, esthetic installation on architectural structures.
It is also used on sites where the anchoring point must be mobile so that it does not interfere with operation of machines.
The Ballsafe anchoring point is formed by two main components: The peg or female sleeve : this is installed permanently in the structure.
It can be used sealed in concrete, or sandwiched in a metal structure.
Once in place, the sleeve is discrete and cannot be used without a Ballsafe anchoring point.
This device is easy to use and allows the user to easily move and connect with no difficulty.
The female sleeve is simple and fast to install, No special tool is required.
The sleeve is simple to test before it is put into use by means of a Dynaplug dynamometer set for 500kg for 15 seconds.
The Ballsafe is approved per EN795 class A for the sleeve and per EN795 class B for the ball pin.
The ball pin is supplied with a plastic sealing cover protecting the system from water and soiling.
Technical characteristics
Female sleeve
Installation in solid structure
The sleeve must be installed in a structure capable of withstanding a force of 1T.
The sleeve must be secured by a chemically sealed dowel satisfying the specification requirements.
The minimum size of the support must be 170 mm.
The sleeve must never be installed at less than 85 mm from the edge of the structure.
The sleeve must never protrude by more than 30 mm from the surface of the drilling plane.
Dowel dimensions: M22 x100
Drilling dimensions: Ø30 x 105
Material: stainless steel
Weight: 210 g
Installation in steel structures
Drilling dimensions : Ø30
Minimum thickness of support : 10 mm
Ball Pin / Block Plug / Eye Bolt
Material : stainless steel body, anchor rings made of bichromate steel
