Carol winches are manual wire rope winches for installation in a permanent location. They may be used for lifting or pulling a load and are available in two versions: one model with spur gearing and one with worm gearing. The cable is wound onto the drum by turning the crank. The gears have been fully subjected to endurance and destruction tests. Hubs machined to retain lubrication. Automatic ratchet brake with stainless steel spring on both series. Drum released by an easily accessible lever. Safety device to prevent release of the machine when under load. Mechanism protected by a removable casing. Wire rope anchor point: Adaptable to various rope diameters without any special tool. Adjustable handle length makes it easy to use.
This is designed for lifting without marking of products with parallel sides made of various materials such as wood, concrete, steel, plastic and rock. These accessories are fitted with an open position locking system allowing the positioning of the load. Rubber coated pads ensure a great adherence and avoid load marking. Clamping is proportional to the load, thus minimising the damage risk.
Tractel TOPAL PP adjustable clamp - 1000kg/jaw opening 200 - 1000mm.
This grab can be used for vertical lifting, without marking, all products with parallel sides made of various materials: concrete, steel, plastic, wood, marble, etc. These accessories are fitted with an automatic lower lock which allows the load to lay down without any manual intervention. Rubber coated pads ensure a great adherence and avoid load marking. Transport handles make the positioning easier. Clamping is proportional to the load, thus limiting the damage risk.
The Tractel TOPAL RT is used for the lifting of rods, tubes, profiles and various small squares in circles or bundles. Once it's locked in the open position this allows you to deposit the load without any action on the caliper. These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.
The ballsafe anchor point is made up of a four block plug and a female socket. It is sealed into concrete or a material of equal density using a chemical compound. Complies with Standard EN 795 A and B. Perfect for use as ladder restraint eye bolts when a visible bolt is not allowed / required such as architectural and listed buildings. Available with eyebolt only or eyebolt (block plug) and female sockets.
The swing blocks of EC type are mainly used for temporary applications for lifting or pulling. They can be su spended to a fixed or mobile anchorage point with the right strength corresponding to the required load. Thanks to an easy instalment and a light weight, this is the most current block used for repairing operations. These swing blocks are most often used as winch accessory on 4WD cars.
Tractel EC Snatch Pulley Scissor Type are available in the following sizes - 1.6t, 3.2t, 5t, 8t.
As well as being sound safety management, regulations require you to ensure your equipment for lining personnel or loads is safe. BLOCSTOP safety systems meet the most exacting safety requirements and can be easily adapted to numerous types of applications. Available with different capacities 800kg, 1000kg, 1200kg and 2400kg.
The Tractel TOPAL VDL Clamp is a handling accessory to lift open or closed vertical metal drums with edges (Standard drums with edge on each face).
The Tractel TOPAL TB are hooks for use in pairs to lift pipes with a large opening, fitted with long handles for easy handling. Working in pairs with a 2-arm sling the load is lifted in a horizontal position.
Tralift Manual Chain Hoist from Tractel has a Hook suspension with 360° swivel, Tested to 150% of WLL, Automatic brake with double pawl system.
Self-lubricating chain, corrosion resistant, made to standard NFE 26-010 (resists marine mists >800 h. and temperatures to 280° C). Optional load limiter.
Available in sizes 250kg, 500kg, 1000kg, 1500kg, 2000kg, 3000kg, 5000kg, 10,000kg and 20,000kg.
Topal Industries PBF Lifting Beam for Pal-Turn.
PC Swivel Hook Forklift Truck Attachment from Topal Industries.
Provides an hanging point on fork lift trucks to handle loads.
LiftingSafety uses cookies to improve your user experience, To accept this, please click the 'accept' button below.