Tractel "EC" Swing Cheek Scissor Type Pulley - Range from 1600kg to 8000kg
Snatch pulley "scissor type" for use with wire rope.
The large holes in the bearing flanges offer several anchorage alternatives means of shackles, axles, chains, hooks, slings. The holes can also be used as handles for an easy transportation. Once the swing blocks are attached, locking the two flanges, the opening is impossible making the pulling or lifting operation in full security.
- Quick, easy installation.
- Low weight.
- Multiple applications.
The swing blocks of EC type are mainly used for temporary applications for lifting or pulling. They can be su spended to a fixed or mobile anchorage point with the right strength corresponding to the required load. Thanks to an easy instalment and a light weight, this is the most current block used for repairing operations. These swing blocks are most often used as winch accessory on 4WD cars.
- Ultimate load 4 times the Working Load Limit (WLL).
- Zinc bichromated coating as finishing.
- The sheaves are fitted on tempered and cemented pins with a full covered lubricating nipple.
|Model||Sheave bog*Ø/outØ (mm)||Wire rope Ø min/max (mm)||Capacity (kg)||Weight (kg)||outside
Ø of the roller E (mm)
|H (mm)||K (mm)||A (mm)||B (mm)|
|EC1.6-100E9||80 / 100||08 / 09||1600kg||2.2||100||180||60||66||40|
|EC3.2-160E12||132 / 160||10 / 12||3200kg||4.8||160||260||80||86||50|
|EC5-200E15||160 / 200||13 / 15||5000kg||9.3||200||330||100||106||60|
|EC8-250E18||210 / 250||16 / 18||8000kg||19.4||250||410||120||138||80|