Verlinde Tirlift Electric Wire Rope Lifting Hoist - 500kg

General description

• These winches are designed for lifting of loads up to 500kg (Class FEM 1Bm).
• Up to 102 metre height of lift
• Fast lifting speed @ 18 metres per minute
• Comply with directive “CE” 98/37/EEC.
• Special drum (standard x 1.5) for 5mm wire rope for loads up to 500kg
• Protection of electrical components (control panel and motor), type IP55.
• Totally enclosed, life lubricated, helical gear treated
• single speed lift at 18 metres per minute lifting speed.
• Hoisting motor 400V / 50 Hz/3 PH with insulation class F, IP 55 protection. Spring loaded disc brake.
• A start/stop contactor
• A 48 V Low Voltage transformer
• A modular and evolutional under frame allowing many directions for wire rope outlets from the drum.
• Components built into box attached to winch, with a 2-meter cable to the push button box.

Optional equipment

• Limit switch with cams is mounted onto drum outlet.
• Drum outlet shaft (to install a coder or a limit switch for special lifting).
• Roll for tightening wire rope.
• Rope pressure roller.
• Manual brake release.
• Fixed-point plate with load limiter and tensor.
• Centred lifting.
• Capstan-type winch.
• Return pulley without axle, Return pulley assembly
• Special wire rope, stainless steel wire rope
• Special-length drum.
• Several rope outlets on the drum.
• Thermal probe relay for motor.
• Motor tropicalisation.
• Class H motor.
• Other voltages and frequency of power supply and other control voltage.