Codipro DSR Double Swivel Lifting Point

The DSR lifting ring is a double swivel ring. It is composed of a GRADUP lifting ring designed for rotations under load. Its double swivel ensures perfect alignment with the sling. The lifting ring can swivel 180° but has a rotating range of 360°. It can be used for any lifting configuration (straight lift, with angle, tilting, rotating).

The DSR lifting ring is equipped with a protective crossbar and is approved for all lifting configurations from 0° to 90°. The DSR is designed for use in a temperature range from -20°c to +200°c and carries various markings, including CE, WLL and tightening torque. It is manufactured in compliance with the REACH regulation and is also available as female and stainless-steel, quick lift and welding versions.

All DSR models have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.

The DSR model is available in either male or female versions (FE.DSR).

Features

• GRADUP steel ring
• Swivelling under load
• 360° rotation
• 180° articulation
• Safety factor of 5:1 and Safety factor of 4:1
• Zinc-coating
• Control anti-crack on 100% of products
• Fatigue test
• Two ways of tightening
• Individual traceability number
• Other variants are available on request
• Each ring is accompanied by use recommendations
• Delivered with a certificate of compliance
• Complies with the Machinery Directive 2006/42/CE
• Tested to EN 1677-1
• Other non-standard variants are available on request. To name some (See below for more details) examples of the customisations available; longer length bolts (L1 dimension), custom thread forms (Metric fine, UNF, UNJ, BSPP, BSF, BSW, 8UN etc. - Any thread form is possible), with flat or angular spacers (often seen in aerospace wind-farm technology), or to suit oversized threaded holes (e.g. if only M24 is required to achieve the desired WLL, but the hole is pre-threaded to M60, a threaded 'bell type' conversion spacer/adapter is a possibility - a far more cost effective solution).
• Made in Luxembourg.
• 7 Year manufacturer's warranty

Dimensions & Specifications: Metric Threads

Reference	Diameter	SF 5:1 WLL (t)	SF 4:1 WLL (t)	Standard L1 (mm)	Torque (Nm)	S1 (mm)	S2 (mm)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	H (mm)	Weight (kg)
DSR M 5 UP	M 5 (x0,8)	0,07	0,10	15	3	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR M 6 UP	M 6 (x1)	0,15	0,20	15	4	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR M 8 UP	M 8 (x1,25)	0,40	0,50	15	6	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR M 10 UP	M 10 (x1,5)	0,70	0,90	18	10	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR M 12 UP	M 12 (x1,75)	1,05	1,30	21	15	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR M 14 UP	M 14 (x2)	1,40	1,80	23	30	8	20	45	40	45	53	38	17	76	13	0,9
DSR M 16 UP	M 16 (x2)	2,00	2,30	27	50	8	20	45	40	45	53	38	17	76	13	0,9
DSR M 18 UP	M 18 (x2,5)	2,30	2,30	27	70	8	20	45	40	45	53	38	17	76	13	0,9
DSR M 20 2t5 UP	M 20 (x2,5)	2,50	2,50	30	100	8	20	45	40	45	53	38	17	76	13	0,9
DSR M 20 3t2 UP	M 20 (x2,5)	2,90	3,20	25	100	14	24	62	55	60	83	55	25	115	19	2,6
DSR M 22 UP	M 22 (x2,5)	3,50	4,50	33	120	14	24	62	55	60	83	55	25	115	19	2,6
DSR M 24 UP	M 24 (x3)	4,40	5,50	36	160	14	24	62	55	60	83	55	25	115	19	2,6
DSR M 27 UP	M 27 (x3)	5,70	6,00	40	200	14	24	62	55	60	83	55	25	115	19	2,7
DSR M 30 6t3 UP	M 30 (x3,5)	6,00	6,30	45	250	14	24	62	55	60	83	55	25	115	19	2,7
DSR M 30 8t UP	M 30 (x3,5)	6,70	8,00	45	250	14	30	80	77	78	98	71	26	141	28	5,4
DSR M 36 UP	M 36 (x4)	8,00	8,50	54	320	14	30	80	77	78	98	71	26	141	28	5,4
DSR M 42 UP	M 42 (x4,5)	8,50	9,00	63	400	14	30	80	77	78	98	71	26	141	28	5,5

Dimensions & Specifications: UNC Threads

Reference	Diameter	SF 5:1 WLL (lbs)	SF 4:1 WLL (lbs)	Standard L1 (mm)	Torque (Nm)	S1 (mm)	S2 (mm)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	G (mm)	H (mm)	Weight (kg)
DSR U 025 UP	UNC 1/4’’-20	330	450	13	3	8	16	32	30	30	38	27	14	53	9,5	0,3
DSR U 516 UP	UNC 5/16’’-18	1,000	1200	15	5	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR U 038 UP	UNC 3/8"-16	1300	1600	17	8	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR U 050 UP	UNC 1/2"-13	2400	2800	21	12	8	16	33	30	30	38	27	14	53	9,5	0,3
DSR U 058 UP	UNC 5/8"-11	3900	4900	27	40	8	20	45	40	45	53	38	17	76	13	0,9
DSR U 075 UP	UNC 3/4"-10	5250	5250	30	80	8	20	45	40	45	53	38	17	76	13	0,9
DSR U 078 UP	UNC 7/8"-9	7,900	9800	33	90	14	24	62	55	60	83	55	25	115	19	2,5
DSR U 100 UP	UNC 1"-8	11200	12500	36	125	14	24	62	55	60	83	55	25	115	19	2,6
DSR U 118 UP	UNC 1" 1/8-7	11500	13,000	42	160	14	24	62	55	60	83	55	25	115	19	2,6
DSR U 125 UP	UNC 1" 1/4-7	13500	13500	45	200	14	24	62	55	60	83	55	25	115	19	2,7

Examples of the Customisations Possible

How to use the Codipro DSR Lifting Ring

The CODIPRO team, always listening to the market and keeping an eye on its trends, works constantly to improve and develop its range of swivel lifting rings.

The GRADUP range has been especially developed to be the quintessential swivel lifting ring, particularly in terms of the quality of the raw materials used.

The CODIPRO research department, supported by advice from internationally renowned research centers, selected the best quality steel to achieve the best balance between tensile strength, breaking load and fatigue strength.

Each component of the GRADUP lifting rings’ hinge system has also been reviewed. The outer crowding dimensions, the screw couplings and the openings are compatible with CODIPRO lifting rings already on the market.

This major innovation, the GRADUP lifting ring, is the fruit of more than 40 years’ experience combined with in-depth research.

What are the benefits of the GRADUP range ?

• • Individually packed in a transparent, resealable pack containing the use recommendations and the certificate of compliance, each GRADUP lifting ring has an individual traceability number that is specific to CODIPRO.
• The GRADUP lifting rings are 100% compatible with lifting rings in the existing SEB, DSR, DSS ranges, etc. They are simply more effective.
• The optimization of the raw materials enables a significant improvement in WLL: up to 11% additional WLL (23% in safety factor 4).
• In keeping with its mission statement: “Our QUALITY = Your SAFETY”, CODIPRO is offering certified lifting rings stamped with the 5:1 safety factor, which means they can be used throughout the world, including in the USA. CODIPRO also provides all the information needed for use with a 4:1 safety factor, as defined under the EN 1677-1 standard.
• A lifting ring is intrinsically stronger when it is used linearly (= an angle of 0°). Under these conditions, the GRADUP lifting rings offer improved WLL, the values for which are defined in the tables at the end of the catalogue.
• An anti-corrosion coating means that the unpainted parts of the CODIPRO swivel lifting rings are resistant to salt mist spray for 600 hours.
• The tightening torque is stamped on all lifting rings in the GRADUP range.
• As a producer of lifting fittings, CODIPRO is especially concerned with the orange color (RAL 2002), which is always associated with SAFETY. This particular shade, which has been a feature of the CODIPRO brand for many years, allowing users to distinguish CODIPRO’s lifting rings from all the copies available on the market that could put operators’ lives in danger.

Grade 6, 8, 10, 12... Why GRADUP ?

The quality of the steel is the essential characteristic of a swivel lifting ring. In the world of lifting, it is normal to speak in terms of class of steel, or “grade”. This “grade” is what it’s all about for a chain, because the diameter of the chain combined with the class of the material is what gives the lifting capacity. In recent years, some “grades” that are higher than others have appeared on the market. Based on this, many manufacturers are offering lifting rings of class 10, 12, 14, etc. These descriptions are not relevant for lifting devices with multiple components, such as a swivel lifting ring. This is why CODIPRO is seeking to move away from this trend that is almost entirely based on marketing promotions.

By creating the GRADUP (or optimized grade) range, CODIPRO is offering a breakthrough innovation. In a swivel lifting ring with multiple components, each element is subject to different constraints. In order to offer maximum strength, each separate piece must be conceived so that the materials used and the design are the most appropriate for its function within the overall device. With the release of the GRADUP brand, CODIPRO is now offering an ultra-safe and ultra-high-performance lifting ring.

When can GRADUP be used ?

Anytime and anywhere in a traditional industrial environment: the GRADUP swivel lifting rings are designed to be used within a temperature range of -20°C to +200°C (-4°F to +392°F). Use
recommendations provided in 15 languages give a detailed description of the conditions for use.

For extreme applications such as offshore use, or very low/very high temperatures, etc., our engineers at the CODIPRO research department are available to provide details about the composition of our lifting rings: strength, chemical composition, mechanical strength, tensile strength, etc.

What certifications have been given to the GRADUP range ?

All CODIPRO swivel lifting rings comply strictly with the points in the Machinery Directive 2006/42/CE.

The EN 1677-1 standard (January 2009) applicable to “forged steel components of Grade 8” is restrictive with regard to the quality of the steel that can be used. With its innovative GRADUP range, CODIPRO has gone further, using higher-performance steels. CODIPRO has committed to complying with the essential points of the EN 1677-1 standard: the way in
which the components must be produced, tested and certified.

All lifting rings in the GRADUP range also comply with the ASME B30.26-2010 standard. They can be used in the USA with no specific safety measures.