The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope.
The unit is self-aligning, unlike a drum winch, with which it is only possible to pull in one direction. In addition, the lifting speed and the capacity of the TIRAK remain constant.
The TIRAK mobile winch is the ideal lifting and pulling device for frequently-changed operating positions on site.
Anchoring and operation of the TIRAK ® mobile unit with its special TIRAK ® wire rope is quick and versatile. Once in position it is designed to automatically turn in the direction of line pull and for the tension and rope speed to remain constant at all times.
The outstanding features of the TIRAK ® mobile winch make it a most versatile unit; it can be used like a conventional winch as well as a materials hoist.It is the ideal solution for lifting and pulling applications in the installation of lift shafts, for tensioning conveyor belts, to operate large hangar doors, to move stage settings, to pull undergroumd power lines, in building, construction and civil engineering.
The special TIRAK ® steel wire rope supplied with the TIRAK ® has been designed and manufactured to extremely fine tolerances demanded by the TRACTEL group for use with the machine.
Safety Feature
- Terminal switch for limiting the height of lift wherever desired.
- Terminal switch switches off when it is passed by the rope termination ensuring that the rope cannot accidentally pay out fully.
- Overload trip is optional..
- Emergency lowering in power failure at a controlled speed.
- Electrical system suitable for use on building sites. The motor and controls are protected class IP54.
- Easy to operate push button pendant control.
- Heavier loads can be handled using winch with snatch blocks.
- Full safety features including limit switches and release/lower facility.
Hoist Specifications
(A) Tirak® Mobile winch with 60m* free spool wire rope reeler fitted with 3m pendant control 48v
The compact frame with free wire rope reeler allows the reeling of the wire rope up to 60 m length. The frame is designed for the TIRAK powered hoist through which the wire rope passes, series X-300, X-500, X-700 and T-1000. The compact frame has the following safety features: – wire rope limit switch (code 15428 for X-300/500/700 and code 15757 for T-1000). The necessary adjustment is by moving the adjustable end-stop (clamp). – end-of-rope sensor (code 36257 for X-300, 38177 for X-500/700 and 38717 for T-1000), which stops the TIRAK as soon as the end of the wire rope reaches the switch. It therefore prevents the wire rope running completely through the TIRAK. Option: overload limit device.
|
| Model |
Capacity (kg) |
Reeler capacity (m) |
Speed m/mn |
Motor kW (¹) |
ø Wire rope (mm) |
Weight (kg) without rope |
| X300 |
300 |
60 |
9 |
0.5 |
8.3 |
60 |
| X302 |
300 |
60 |
17 |
0.9 |
8.3 |
60 |
| X504 |
500 |
60 |
4.5 |
0.5 |
8.3 |
75 |
| X500 |
500 |
60 |
9 |
0.9 |
8.3 |
75 |
| X505 |
500 |
60 |
4.5/9 |
0.5/0.9 |
8.3 |
85 |
| X506 |
500 |
60 |
4.5/18 |
0.5/1.8 |
8.3 |
85 |
| X503 |
500 |
60 |
9/18 |
0.9/1.8 |
8.3 |
85 |
| X804 |
800 |
60 |
4.5 |
0.8 |
8.3 |
80 |
| X800 |
800 |
60 |
9 |
1.6 |
8.3 |
80 |
| X805 |
800 |
60 |
4.5/9 |
0.8/1.6 |
8.3 |
85 |
| X806 |
800 |
60 |
4.5/18 |
0.8/3.2 |
8.3 |
105 |
| X803 |
800 |
60 |
9/18 |
1.75/3.5 |
8.3 |
85 |
| X1024 |
980 |
50 |
4.5 |
0.9 |
9.5 |
85 |
| X1020 |
980 |
50 |
9 |
1.8 |
9.5 |
80 |
| X1025 |
980 |
50 |
4.5/9 |
0.9/1.8 |
9.5 |
90 |
| X1026 |
980 |
50 |
4.5/18 |
0.9/3.8 |
9.5 |
105 |
| X1023 |
980 |
50 |
9/18 |
1.9/3.8 |
9.5 |
90 |
| X3050 |
3000 |
60 |
6 |
3.8 |
14 |
200 |
| X3052 |
3000 |
60 |
12 |
7.5 |
14 |
225 |
(B) Tirak® Mobile winch with driven (powered of main motor) wire rope reeler upto 220 metres.
In this type of frame, the wire rope reeler is driven by the hoist and allows the reeling of wire ropes up to 220 m. The frame is designed for TIRAK powered hoists with wire rope reeler, series X-500, X-700 and T-1000. The compact frame has the following safety devices: – wire rope limit switch. The necessary adjustment is by moving the adjustable end-stop (clamp). – end-of-rope sensor, which stops the TIRAK as soon as the end of the wire rope reaches the switch. It therefore prevents the wire rope running completely through the TIRAK.
|
| Model |
Capacity (kg) |
Reeler capacity (m) |
Speed m/mn |
Motor kW (¹) |
ø Wire rope (mm) |
Weight (kg) without rope |
| X500 |
500 |
120 |
9 |
0.9 |
8.3 |
115 |
| X504 |
500 |
120 |
4.5 |
0.5 |
8.3 |
115 |
| X505 |
500 |
120 |
4.5/9 |
0.5/0.9 |
8.3 |
125 |
| X506 |
500 |
120 |
4.5/18 |
0.5/1.8 |
8.3 |
125 |
| X503 |
500 |
120 |
9/18 |
0.9/1.8 |
8.3 |
125 |
| X804 |
800 |
120 |
4.5 |
0.8 |
8.3 |
120 |
| X800 |
800 |
120 |
9 |
1.6 |
8.3 |
120 |
| X805 |
800 |
120 |
4.5/9 |
0.8/1.6 |
8.3 |
125 |
| X806 |
800 |
120 |
4.5/18 |
0.8/3.2 |
8.3 |
145 |
| X803 |
800 |
120 |
9/18 |
1.75/3.5 |
8.3 |
125 |
| X1024 |
980 |
95 |
4.5 |
0.9 |
9.5 |
125 |
| X1020 |
980 |
95 |
9 |
1.9 |
9.5 |
120 |
| X1025 |
980 |
95 |
4.5/9 |
0.9/1.8 |
9.5 |
130 |
| X1026 |
980 |
95 |
5.5/18 |
0.9/3.8 |
9.5 |
145 |
| X1023 |
980 |
95 |
9/18 |
1.9/3.8 |
9.5 |
130 |
(C) Tirak® Mobile winch with upto 500m (800m on X3000 series) dedicated powered wire rope reeler.
The wire rope reeler is driven by the hoist (by a chain), allowing the reeling of wire ropes up to 800 m in length. The reeling is controlled by a pivoting reeling arm. The frame is designed for TIRAK powered hoists with wire rope reeler, series T-500 and T-1000. The frame is fitted with the following safety features: – wire rope limit switch. The necessary adjustment is by moving the adjustable end-stop (clamp). – an end-of-rope sensor, which stops the TIRAK as soon as the end of the wire rope reaches the switch. It therefore prevents the wire rope running completely through the TIRAK.
The following accessories are available:
- overload limit device
- anchor brackets
- castor wheels to allow easier movement.
The machine is fitted with a push-button pendant control with emergency stop and 3 m of control cable. Option: 48 V push-button pendant control. |
| Model |
Capacity (kg) |
Reeler capacity (m) |
Speed m/mn |
Motor kW (¹) |
ø Wire rope (mm) |
Weight (kg) without rope |
| X500 |
500 |
500 |
9 |
0.9 |
8.3 |
115 |
| X504 |
500 |
500 |
4.5 |
0.5 |
8.3 |
115 |
| X505 |
500 |
500 |
4.5/9 |
0.5/0.9 |
8.3 |
125 |
| X506 |
500 |
500 |
4.5/18 |
0.5/1.8 |
8.3 |
125 |
| X503 |
500 |
500 |
9/18 |
0.9/1.8 |
8.3 |
125 |
| X804 |
800 |
400 |
4.5 |
0.8 |
8.3 |
120 |
| X800 |
800 |
400 |
9 |
1.6 |
8.3 |
120 |
| X805 |
800 |
400 |
4.5/9 |
0.8/1.6 |
8.3 |
125 |
| X806 |
800 |
400 |
4.5/18 |
0.8/3.2 |
8.3 |
145 |
| X803 |
800 |
400 |
9/18 |
1.75/3.5 |
8.3 |
125 |
| X1024 |
980 |
350 |
4.5 |
0.9 |
9.5 |
125 |
| X1020 |
980 |
350 |
9 |
1.9 |
9.5 |
120 |
| X1025 |
980 |
350 |
4.5/9 |
0.9/1.8 |
9.5 |
130 |
| X1026 |
980 |
350 |
5.5/18 |
0.9/3.8 |
9.5 |
145 |
| X1023 |
980 |
350 |
9/18 |
1.9/3.8 |
9.5 |
130 |
| X3050 |
3000 |
800 |
6 |
3.8 |
14 |
TBC |
| X3052 |
3000 |
800 |
12 |
7.5 |
14 |
TBC |
