Crosby G209A Alloy Screw Pin Lifting Shackles

Alloy Bow Shackle with Screw Pin - G209A Series from Crosby

Crosby G209A Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271F Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

Key Features: G-209A

• Capacities 2 to 21 metric tons.
• Meets performance requirements of Grade 8 shackles.
• Forged Alloy Steel – Quenched and Tempered, with alloy pins.
• Working Load Limit permanently shown on every shackle.
• Hot Dip Galvanised.
• G209A shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
• Approved for use at -40 degrees C (-40 degrees F) to 204°C (400°F).
• Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.
• Higher capacity-to-size ratio compared to the standard G209 Crosby Shackle.

Metric Dimensions & Specifications

Nominal Size (in.)	Working Load Limit (t)*	Stock No.	Weight (kg)	Dimensions (mm)											Tolerance +/-
				A	B	C	D	E	F	G	H	L	M	P	C	A
3/8	2	1017450	.14	16.8	11.2	36.6	9.65	26.2	23.1	45.2	63.5	6.35	51.5	9.65	3.3	1.50
7/16	2-2/3	1017472	.17	19.1	12.7	42.9	11.2	29.5	26.9	51.5	74.0	7.85	60.5	11.2	3.3	1.50
1/2	3-1/3	1017494	0.29	20.6	16.0	47.8	12.7	23.3	30.2	58.5	83.5	9.65	68.5	12.7	3.3	1.50
5/8	5	1017516	0.63	26.9	19.1	60.5	16.0	42.9	38.1	74.5	106	11.2	85	17.5	3.3	1.50
3/4	7	1017538	1.02	31.8	22.4	71.5	19.1	51.0	46	89	126	12.7	101	20.6	6.35	1.50
7/8	9-1/2	1017560	1.53	36.6	25.4	84	22.4	58	53	102	148	12.7	114	24.6	6.35	1.50
11	12-1/2	1017582	2.41	42.9	28.7	95.5	25.4	68.5	60.5	119	167	14.2	129	26.9	6.35	1.50
1-1/8	15	1017604	3.09	46	31.8	108	29.5	74.0	68.5	131	190	16.0	142	31.8	6.35	1.50
1-1/4	18	1017626	4.31	51.5	35.1	119	32.8	82.5	76.0	146	210	17.5	156	35.1	6.35	1.50
1-3/8	21	1017648	6.01	57.0	38.1	133	36.1	92	84	162	233	19.1	174	38.1	6.35	3.3

Imperial Dimensions & Specifications

For Imperial Dimensions and Specifications, click the 'Downloads' tab above and view the 'Crosby 209A Alloy Screw Pin Anchor Shackles - Imperial (Page 78)' PDF.

Alternative Shackles

If the G209A isn't quite the lifting shackle that you're looking for, have no fear; we have a huge range available to choose from, including the likes of the standard version of the Crosby G209 shackle. If it's specifically Crosby that you're looking for, you can find all Crosby Shackles here.