Crosby IPU10S & IP10S Plate Clamp for Stainless Steel, WLL Range from 500kg to 12,000kg

• IP10/S and IPU10/s vertical lifting clamps are suitable for the lifting, turning (180°) and vertical transfer of Stainless steel plates, beams and sections.
• These lifting clamps are fitted with a cam segment and a pivot made of stainless steel so as to avoid contact corrosion.

Available in two versions:

1. IPU10/S: Fitted with a hinged hoisting eye moving in all directions so as to enable the user to place and lift the load from any direction.
Further specification: see model IPU10. For a correct use of the clamp, see fig 2 & 3.

2. IP10/S: Fitted with a fixed hoisting eye.
Further specifications: see model IP10. For correct use of the clamp, see fig. 4 & 5

• Higher WLL and different jaw-aperatures upon request
• The minimum working load must be at least 10% of the rated WLL.
• Before using the clamp always read the instructions manual supplied with the clamp

Metric Dimensions & Specifications

Model	WLL (t)	Dimensions (mm)									Weight (kg)
		Jaw A	B	C	D	E	F	G	H	K
With Universal Hoisting Eye (IPU10S)
2702275	0.5	0-16	44	128	228	30	115	41	28	10	1.9
2702263	1.0	0-20	45	139	222	30	126	41	38	10	2.1
2702277	2.0	0-35	78	201	372	70	190	61	55	16	7.6
2702265	3.0	0-40	100	253	445	75	225	78	60	20	14.8
2702267	4.5	0-40	Contact us for dimensions								16
2702269	6.0	0-80									24
2702295	6.0	50-100									26.5
2702271	9.0	0-50									29.5
2702273	9.0	50-100									33.9
2702279	12.0	0-54									57
2702281	12.0	80-108									65.2
With Fixed Hoisting Eye (IP10S)
2702274	0.5	0-16	44	128	207	30	115	41	28	10	1.8
2702262	1.0	0-20	45	139	215	30	126	41	38	10	2
2702276	2.0	0-35	78	201	336	70	190	61	55	16	6.8
2702264	3.0	0-40	100	253	436	75	225	78	60	20	13.8
2702266	4.5	0-40	Contact us for dimensions								15
2702268	6.0	0-50									23.5
2702294	6.0	50-100									24.5
2702270	9.0	0-50									27.5
2702272	9.0	50-100									32.8
2702278	12.0	0-54									49
2702280	12.0	54-108									58.1

IPU10S Dimensions

IP10S Dimensions