Unfortunately, the Tiger CRT has been discontinued. Please see our range of rail lifting clamps for a possible alternative.
The Tiger CRT rail clamps are designed to securely and safely lift and pull single rails in both lengthwise and crosswise directions. The clamps are locked onto the railhead via a lever-operated spring mechanism and are designed to fit most types of rail sections currently in use (S49, S54, S60, UIC60).
Very solid, a practical design and with low dead weight.
Each clamp is marked with jaw width, working load limit, serial number and year of manufacture.
Narrow profile to enable attachment to an individual rail that is stacked side by side with other rails.
No tools required.
The clamp is locked onto the rail-head via a lever-operated spring mechanism.
4:1 factor of safety.
Dimensions and Specifications
Capacity
A – Jaw Opening (mm)
A (mm)
B Max. (mm)
C Max. (mm)
D (mm)
E (mm)
Weight (kg)
2.0t
15-85
15-85
170
302
60
111
6.2
Pricing
Unfortunately, this product has been discontinued and/or is no longer available.
Please contact us for details on possible alternative products.
Unfortunately, the Tiger CRT has been discontinued. Please see our range of rail lifting clamps for a possible alternative.
The Tiger CRT rail clamps are designed to securely and safely lift and pull single rails in both lengthwise and crosswise directions. The clamps are locked onto the railhead via a lever-operated spring mechanism and are designed to fit most types of rail sections currently in use (S49, S54, S60, UIC60).
Very solid, a practical design and with low dead weight.
Each clamp is marked with jaw width, working load limit, serial number and year of manufacture.
Narrow profile to enable attachment to an individual rail that is stacked side by side with other rails.
No tools required.
The clamp is locked onto the rail-head via a lever-operated spring mechanism.
