Beam for lifting and laying conical pipe sections, Topal SCX, Topal CX.
Model:
TOPAL SCX/CX
Quick Ref:
TTS-3316
More from:
These accessories are fitted with polyurethane coated pads which enable the handling of cone-shaped manholes without marking. Delivery includes a chain sling (CX1 model).
Functioning
Use with a 2-legged sling:
CX1 - 480 mm/ leg, chain Ø 7 mm
SCX1 - 490 mm/ leg, chain Ø 7 mm fitted with HR 1 t shackles.
Slide the beam slantwise in the cone-shaped manhole, then fix horizontally. As the lift is applied, the polyurethane coated pads will engage and grip the inner wall diameter reduction, holding at about 700 mm. So as to free the beam, release the tension on the sling and take the beam out of the manhole, gripping it by its ends.
Features
Hot epoxy coating.
Safety factor: 4 in accordance with the European Materials Handling Federation (1998 FEM 3d edition) ; working group A5 and lifting speed 60 m/min.
If you wish to receive a quote for this product, please use the Pricing section to the right, this form is for general enquiries regarding this product only.
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Pricing
These accessories are fitted with polyurethane coated pads which enable the handling of cone-shaped manholes without marking. Delivery includes a chain sling (CX1 model).
Functioning
Use with a 2-legged sling:
CX1 - 480 mm/ leg, chain Ø 7 mm
SCX1 - 490 mm/ leg, chain Ø 7 mm fitted with HR 1 t shackles.
Slide the beam slantwise in the cone-shaped manhole, then fix horizontally. As the lift is applied, the polyurethane coated pads will engage and grip the inner wall diameter reduction, holding at about 700 mm. So as to free the beam, release the tension on the sling and take the beam out of the manhole, gripping it by its ends.
Features
Hot epoxy coating.
Safety factor: 4 in accordance with the European Materials Handling Federation (1998 FEM 3d edition) ; working group A5 and lifting speed 60 m/min.
