Alloy Steel Lifting Shackles, Bow & "D"
If you're looking for an alternative to the traditional BS 3032 lifting shackle, you are in the right place. Here we have quite a vast selection of alloy bow and dee shackles, predominantly from what a probably the two most well-known shackle manufacturers in the world, Van Beest (branded as Green-pin) and Crosby, typically with a red painted pin.
Due to the higher grade material, alloy shackles are considerably smaller and stronger (so with higher capacities against smaller physical sizes) than the BS3032 type, and they are also galvanised as standard, with the aforementioned painted pins.
All of our lifting shackles, as standard, are supplied with a Declaration of Conformity certificate.
Alloy Lifting Shackle Types
US Fed Spec Alloy Steel Lifting Bow Shackles
US Fed Spec Alloy Steel Lifting Dee (D) Shackles
EN-13889 Alloy Steel Lifting Bow Shackles
EN-13889 Alloy Steel Lifting Dee (D) Shackles
All Alloy Steel Lifting Shackles, Bow & "D"
Green Pin G-4161 Standard Lifting Screw Pin Bow Shackle
Crosby G209 Screw Pin Lifting Bow Shackles
Green Pin G-5261 Screw Pin Type Super Bow Lifting Shackle
Crosby G209A Alloy Screw Pin Lifting Shackles
Green Pin G-4163 Standard Bolt Type Lifting Bow Shackle
Crosby G2130 & G2130OC Bolt Type Bow Lifting Shackles
Green Pin G-5263 Bolt Type Lifting Bow Super Shackles
Crosby G2140 Alloy Bolt Anchor Bow Lifting Shackles with Nut & Split Pin,
Features: Forged Alloy Steel 2 thru 200 metric tons. Cast Alloy Steel 250 thru 400 metric tons. Working Load Limit is permanently shown on every shackle. All sizes are individually proof tested to 2.0 times the Working Load Limit. Pins are galvanized and painted red.
Certification must be requested at time of order. Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 C.
Crosby G2130A Grade 80 Alloy Bolt Type Lifting Bow Shackles with Nut & Split Pin
Green Pin G-5163 Polar Bolt Type Bow Lifting Shackle
Crosby G2130CT & G2140CT Cold-Tuff Anchor Bow Lifting Shackle with Nut & Split Pin
Green Pin P-6043 Lifting Power Sling Shackle
Crosby G2169 & S2169 Wide Body Screw Pin Lifting Bow Shackles
These shackles significantly improve the life of wire rope slings. They can be used to connect HIGH STRENGTH round slings, synthetic round slings or wire rope slings. An increase in shackle bow radius provides minimum 58% gain in sling bearing surface, increases usable sling strength a minimum of 15%.
Features: Quenched and tempered for maximum strength, forged alloy steel, available in galvanized (G2169) and self-coloured (S2169) finish.
Capacities of 7, 12.5 and 18 metric tonnes
Crosby G2160 & S2160 Wide Body Bolt Type Lifting Bow Shackles with Nut
Crosby G2170 Lifting Grommet Shackles
Green Pin G-4169 Square Sunken Hole Bow Lifting Shackle
Green Pin G-4164 Square Head Lifting Bow Shackle
Green Pin Fixed Nut Shackles for Lifting
Yoke Sub-Sea / ROV Lifting Anchor Shackle with Safety Pin
These shackles are designed specifically for ROV applications and are manufactured with the highest quality steel available. They are also individually stamped with the safe working load. Proof tested to 2 times the safe working load - test certs are provided. Painted white to ensure ease of sight in water.
Crosby G209R ROV / Subsea Bow Shackles for Lifting
These shackles have capacities from 6.5 to 55 metric tonnes. They are forged - quenched and tempered, with alloy pins. The working load limit is permanently shown on every shackle. The also feature quick-check deformation and angle indicators forged on the bow.
All ROV shackle bows, unless otherwise noted are galvanised and then painted fluorescent yellow.
Green Pin G-4151 Standard Lifting Screw Pin Dee Shackle
Green Pin G-4153 Bolt Type Lifting Dee Shackle
Green Pin G-4159 Sunken Hole Lifting D-Shackle
Green Pin G-4154 square Head Lifting Dee Shackle
Crosby G210 Screw Pin Chain Lifting D Shackles (Dee Shackles)
Crosby G2150 & S2150 Bolt Type Chain Shackles for Lifting