Kito Universal Trolleys TS Series - Range from 500kg to 20,000kg

KITO’s TS Series Trolleys have bumpers, which hold trolley surely on the beam and guard against damage to a trolley and wheels arising from a collision with the stopper or between two trolleys. Buffers are available as option to install on the bumpers. Also, extended arms are available as option to install on the bumpers to help prevent damage to a hoist from collision between the hoists suspended from trolleys on the same beam.Trolleys are adjustable for various widths of both tapered and flat flanges by changing the adjusting spacers. Also, they can fit on the beams up to 305mm-flange width by replacing suspension shaft and spacers, etc.

0.5 t to 3 Tonne Plain Trolley	5 Tonne Plain Trolley	1t to 3000kg Geared Trolley	5t to 10000kg Geared Trolley	15t and Over Geared Trolley

Ultra Light Model

Design of trolleys with KITO’s experience made it possible to release the ultra light and compact trolleys.

Track Wheel with better Durability

Through KITO’s unique press process and heat treatment, wheels have much better durability for long life.

Special Contour Wheels

Special attention has been given to the contour of steel trolley wheels in order to provide good contact between wheels and flange surfaces.

Pivot Mounted

Both side plates are pivot mounted so that trolleys can move freely at adequate angles with flange surface. Even if there are irregularities on flange surface such as welded joints, the weight of load is evenly distributed on all the four wheels.

Ball Bearings

High grade sealed ball bearings are used on all the wheels for smooth operation. So no lubrication is required

Specifications

Exploded Diagram and Dimensions