Search Results for "Tractel"- 205 items found

Not the results you were looking for? Try broaden your search terms and avoid using plurals!
Tractel Removeable Eye Bolt. Conforms to EN795

The ballsafe anchor point is made up of a four block plug and a female socket. It is sealed into concrete or a material of equal density using a chemical compound. Complies with Standard EN 795 A and B. Perfect for use as ladder restraint eye bolts when a visible bolt is not allowed / required such as architectural and listed buildings. Available with eyebolt only or eyebolt (block plug) and female sockets.

Tractel Evak 500 Rope Winch with Unlimited Length of Rope.

Specifically designed for ease of handling, operation and transport, the unit is particularly compact and extremely lightweight (6 kg). Its overall size is greatly reduced by incorporating a folding operating handle. Even long lengths of textile rope are easy to handle and store, weighing up to two and a half times less than wire rope. The EVAK 500 has been designed to be used exclusively by professionals who have been fully trained in safety and rescue procedures

Tractel Solo manriding access winch platform (modular / knock down). Manual Electric Operation c/w integrated independent fall arrest system Tractel Solo Man riding Cradle systems are a Winched Platform (one or 2 metre wide) and are supplied as a kit 'Ready to Go', They are fully electric powered by 110v, 220v for 400v or fitted with manual hand cranked wire rope hoists. Systems can be adapted for permanent or temporary installation / use; standard working heights are up to 40 metres though we can supply at system heights to suit our customers requirements - often over 100 metres. Also supplied with roof top cantilever anchorage systems (modular design) that can be left  permanently in-situ or disassembled for use in another location. All systems are fitted with the Blocstop fall arrest system.
Tractel Subito.

The SCAFOR manual hoist has a single wire rope and together with the retractable lifeline (AC04/20) provides a secure and reliable access system, essential for man-riding equipment. Both handles are used for lifting whilst lowering only requires operation of one handle. Designed for working at heights of up to 20 metre. Equipped with a SCAFOR manual winch, this harness is then approved for lifting people. With its safe, easy, and efficient operation, the SUBITO boatswain suspension harness was specially designed for inspection, Maintenance and cleaning.

Tractel Blocmat Load Arrestors from 8m to 25m.
  • Blocmat 250 - 250kg at 10 or 15 metres - 20 metres a min max speed.
  • Blocmat S - 500, 800 or 1000kg at 8, 10, 12, 15, 20 or 25 metres - 18 metres a min arrest speed.
  • Blocmat SI - 500, 800 or 1000kg at 10, 15 or 25 metres - 18 metres a min arrest speed.
  • Tractel Tirak electric hoist for material lifting applications, multiple configurations and infinite height of lift.

    Tirak X Series has an unlimited height of lift because the wire rope is not stored in the machine, centrifugal brake for controlled descent in case of power failure and pendant control with up/down and emergency stop.

    Lighter than the T-series, the X-series are most suited for bosun's chairs, inspection harnesses, one-man cradles and light suspended platforms.

    Tractel Tirak electric hoist for manriding hoist with great duty cycle and numerous build options.

    Tirak X Series main features are as follow. Unlimited height of lift due to the fact that the wire rope is not stored in the machine. It also features a centrifugal brake for controlled descent in case of a power-failure. Additionally it is fitted with a pendant control which incorporates three buttons, these are up, down and an emergency stop. Travel to the work place with the tirak® at speeds up to 18 m/min which is a significant benefit the higher up you have to go. No matter what height, the tirak® hoist will take you there safely and speedily. Different electrical and pneumatic power supplies available

    New product from Tractel, EH Single side opening blocks - 1 Sheave, SWL upto 8000kg (8 tonnes).

    The EH’s range can be used with standard tirfor® and tirak® wire rope cable. The single sheave snatch blocks of the EH’s range are mainly used for temporary applications for pulling and lifting, when quick assemblies and/or dismantlings are required. They can be suspended to a fixed or mobile anchorage point with the right strength corresponding to the required load.

    Tractel EH Single Side Opening Block are available in the following sizes - 1t/wire rope size 8/9mm, 1.6t/wire rope size 7.5/8.3mm 2t/wire rope size 10/12mm, 3.2t/wire rope size 13/15mm, 3.2/wire rope size 10/11.5mm, 5t/wire rope size 13/15mm, 5t/wire rope size 16/18mm, 6.4t/wire rope size 14/16.3mm, 8t/wire rope size 21/23mm

    The Tractel BLOCSTOP is designed specifically for suspended platforms to automatically arrest a fall though has many other possible applications.

    As well as being sound safety management, regulations require you to ensure your equipment for lining personnel or loads is safe. BLOCSTOP safety systems meet the most exacting safety requirements and can be easily adapted to numerous types of applications. Available with different capacities 800kg, 1000kg, 1200kg and 2400kg.

    Tractel Bravo hand lever chain hoist for lifting, pulling and tensioning. Optional overload limiter.

    Lightweight and portable with simple controls.

    Bravo models, available from 1/4 to 6 tons, are suitable for a wide variety of lifting, pulling and tensioning applications: for lifting and lowering loads in manufacturing and assembly operations, removing engines, rigging and moving loads, applying tension to conveyor belts and a wide range of other applications. Available in sizes 500kg, 750kg, 1500kg, 3000kg, 6000kg.

    Tractel CR C-hook.

    The Tractel TOPAL CR are designed for the lifting of coils and/or turning over from the horizontal to the vertical position and vice versa.

    These accessories are fitted with a swivel shoe, locked during transport and therefore securing it which also permits the load progressive and regular turning. An operating handle makes the positioning easier.
    Clamps for lifting horizontal plates individually or in bundles, Tractel TOPAL TLC/TLH/TLR. These clamps are used in pairs with 2-legged sling or multiples of 2 with 2-legged slings and lifting beam, circular plates (use in 3s with 3-legged sling) or welded-plate assemblies.
    Tractel harness with chest and back anchor point to EN361. Has a back anchor point. A chest anchor point. Adjustable thoracique webbing with quick fitting buckle. Weight : 720 g. Size : S, M, XL. Working belt, size : S, M, XL. Thermo-compressed foam shoulder pad. Thigh straps adjustment : quick fitting buckles. Construction Buckles - metal: yellow zinc bichromated, stamped: yellow zinc bichromated. Plastic components : PP. PE webbing, width 45 mm, load breaking 22kN. Machine stitched : PE. CE Certification Notified body : APAVE (N°0082). EN 361. Associated Equipment Anchorage (EN 795). Connectors (EN 362). Anchor device (EN 363).
    Tractel fall arrest harness with D-ring and adjustable straps to EN361. The HT 31 Multiple Use Harness. Specifications - A back anchor point : yellow zinc bichromated. Adjustable thoracique webbing with quick fitting buckle. Weight : 790 g. Size : S, M, XL. Adjustable working belt. Thermo-compressed foam shoulder pad. Construction Buckles - metal: yellow zinc bichromated, stamped: yellow zinc bichromated. Plastic components : PP. PE webbings, colour-fast, width : 45 mm. Machine stitched : PE 12/3. CE Certification APAVE (N°0082). Anchorage (EN 795). Connectors (EN 362). Anchor device (EN 363).
    Tractel HT45BA harness 3 automatic buckles to EN361. The HT45A safety harness complies with the requirements of standard EN361. The HT45A safety harness comes in three sizes: S / M / XL. Blue harness with black seat straps Straps made of 45mm polyester, Automatic buckles made from stainless steel and aluminium. Adjustment buckles made of yellow dichromate steel. Main components - 1 back fastening point. 1 sternal anchorage. 2 leg strap adjustments. 1 sternal adjustment. Main functions Multiple purpose utilization, particularly In a industrial maintenance environment. Very comfortable to use over extended work periods, thanks to its harness type leg straps. Possibility for using a fall arrest connected to sternal anchorage.
    Options at 1.75m or 2m scaff kit by Tractel.

    Tractel Fall Arrest Lanyard Scaffolding Kit comprises of Tractel HT31 Harness and either a 1.75m lanyard or 2m Lanyard stitched on to the harness. 

    Door Bar Kit from Tractel used to create an EN795 anchorage point across the opening of a door way.

    Tractel Door Bar Mobile Anchorage Kit Comprises of : Tractel HT31 Harness, a door bar that complies with the EC standard EN 795B, Stopfor SL 03 m10 automatic fall prevention device for vertical line, 20 metre, 14 mm 3-strand polyamide fibre rope for fall arrest rope or making lanyards. Protective sleeve 50cm, and Shoulder bag Zip fastening size 430mm x 310mm x 150mm.

    Italian Jacket can be adapted to Tractel harnesses without belts.

    The Tractel Italian Jacket has been designed to be suitable for the HT22 and HT31 harnesses without belts. Once the jacket is positioned the straps can be easily and quickly threaded through, gives extreme comfort and quick and easy to put on and off. One size only.

    Tractel Stopfor AP Automatic Guided Fall Prevention Device - Optional Connectors and Rope

    The Stopfor AP is a component in a fall arrest system. It consists of a stranded rope, the sliding rope grab with automatic locking attached to the rope and a lanyard connecting the rope grab to the harness. The Stopfor AP has two tripping systems: the conventional system which operates by the swivelling of the operating lever, and the new “anti-panic” system. It also has a locking function. The Stopfor AP allows the user maximum mobility while providing total safety for work on a vertical plane. In the event of a fall, two separate tripping systems engage the jaw on the rope and stop the fall smoothly. With the conventional tripping system, the operating lever is free and swivels by the action of the force applied by the user via the lanyard with the new “anti-panic” system, if the lever is held.

    Tractel Stopfor K braided rope guided fall arrestor device - Optional Connectors and Rope The STOPFOR K is a sliding fall arrester (which can also be used as a new-generation lanyard tensioner-reducer). When used as a fall arrester, it can be used with 10.5 to 12.5 mm diameter low-stretch rope. The Stopfor K is a new fall arrest concept. Unlike fall arresters implementing a jaw as locking system, the Stopfor K eliminates the risk of mechanical blocking. Blocking is ensured by the body when an abrupt change of position occurs. For this reason, the unit is more ergonomic and compact than its competitors and slides easier on the rope with no excessive locking. By its unique design, the user can adjust his position with one hand, even if the device is tensioned.
    The unit can be opened to allow the user to perform maintenance on the product with no need to disassemble the tensioner.
    Tractel Stopfor B guided rope fall arrestor device - Optional Connectors and Rope The STOPFOR™ B is a sliding fall arrester (which can also be used as a new-generation lanyard tensioner-reducer). When used as a fall arrester, it can be used with 12 to 14 mm diameter braided rope. The STOPFOR™ B is a new fall arrest concept. Unlike fall
    arresters implementing a jaw as locking system, the STOPFOR ™ B eliminates the risk of mechanical blocking. Blocking is ensured by the body when an abrupt change of position occurs. For this reason, the unit is more ergonomic and compact than its competitors and slides easier on the rope with no excessive locking. The unit can be opened to allow the user to perform maintenance on the product with no need to disassemble the tensioner
    Tractel Single Leg Fall Arrest Lanyard - 11mm Diameter The LDA 11mm diameter Lanyard with energy absorber is used as a connecting element between a fixed or mobile anchorage point and the attachment point on the harness.The energy absorber safely stops a fall from a height.
    Tractel Energy Absorbing Lanyard, Twin Leg 11mm Diameter

    Energy absorbing braided twin rope lanyard.

    Available in 1.5 or 2 metre lengths with a selection of connectors

    Complies with EN355

    Tractel Lanyards EN354 Braided Securing Rope

    Tractel LD 11mm braided securing rope lanyards

    Available in 1m, 1.5m and 2m lengths with assorted connectors

    Tractel "LDF" Available in 0.5, 1, 1.5 or 2m lengths

    Tractel LDF twin leg support lanyard.Available stand-alone or with assorted connectors: M10, M41, M51, M53.

    Tractel "Stopfor LCM 05" Support Lanyard Supplied without Sheath with one M41 connector

    The STOPFOR K is a new-generation lanyard tensioner-reducer. This device enables fine-adjustment of the rope length to within a millimeter. By its unique design, the user can adjust his position with one hand, even if the device is tensioned. Supplied with one M10 connector on the unit and available with 2m, 3m or 4m 12.5mm diameter braided rope with one M41 connector attached.

    Tractel LCM 04 Support Lanyard

    The work positioning lanyard LCM04 is a manually adjusted tensioner-reducer. This device works on a low-stretch rope
    with diameter of 12.5 mm and length of 2, 3 or 4 m.The LCM04  is compact and ergonomic and perfectly suited for work positioning.

    Comes complete with 1xM10 connector on unit and 1xM40 connector on rope.

    Tractel "Blocfor 20R and 30R". 20m or 30m fall arrest and rescue inertia reel block.

    The Blocfor 20R and 30R are retractable lifelines (EN360) designed to protect the user in the event of a fall. They are equipped with a rescue device for lifting or lowering. The BLOCFOR R is an automatic-return fall-arrester equipped with a rescue lifting device. It is used vertically, secured to a tripod to evacuate, upward or downward, a person who has fallen. The maximum utilization load of this device is 100 kg. The cable moves freely at normal user speed but is continuously subject to a light return force by a spring which actuates a drum on which the lanyard is wound. In the event of a fall, the user is stopped by the safety catches which engage.

     

    Tractel "Tracpode" Aluminium Rescue Tripod with 20m or 30m maximum working heights. 1.76m to 2.70m Tripod height positions

    The Tracpode™ is an anchor point designed to be used temporarily by one or two persons to access a confined space such as a well, a silo, a sewage system, etc. It is made of aluminium and its light-weight design (18 Kg) makes it easy to transport. The height of the Tracpode™ is adjustable by its extending tubes which can be adjusted to six positions.

    Designed For Use With Tractel Tracpode Tripod

    The Tractel Tracpode bag is specifically designed for transporting of the Tractel Tracpode Tripod, although it can also be used for transporting other equipment. It is made of durable canvas.

    Specification: Length: 1900mm,, Height:  290mm, Depth:  290mm

    Tractel Stopfor "KS" Braided Rope Guided Fall Arrestor Device - Optional Connectors and Rope

    The Stopfor KS, is the version of the Stopfor K, which ensures correct mounting of the device on the rope. The "KS" is the same as the "k" though with an additional safety feature being that the "KS" cannot be mounted on the rope upside-down. The Stopfor K product line (K – KS – KM – KSM) is made of aluminium. They are light weight, robust, ergonomic and compact. The Stopfor devices connect to all the harness fall arrest anchor points, either by a type M10 connector or by a short 30 cm lanyard. Installation of the rope is fast and easy : after removing the connector, the two side plates are pivoted to open and the rope is placed in position. To close the Stopfor, the two side plates are pivoted in the closing direction and the connector is installed and serves as safety lock.

    11mm RLX synthetic rope for use with the Tractel Stopfor K range. TRACTEL® textile rope has a loop at one end and is machine-finished at the other. The loop must be connected to an anchorage point that has a minimum strength of 1T in accordance with the requirements of standard EN795. This anchorage point should preferably be installed at the TOP position. When the anchorage point is at ground level it is essential to protect the rope from sharp or abrasive edges. The rope must under no circumstances be connected below the work position of the user.
    Tractel "LPA" Single Leg Fall Arrest Strap Lanyard - 35mm - With Integrated POY Energy Absorber The LPA lanyard is formed by a Pre-Oriented Yarn webbing strap encased in a tubular polyester sheath. The Pre-Oriented Yarn webbing has elongation properties enabling it to absorb the energy of a fall. The tubular polyester sheath gives the LPA lanyard a very high resistance to abrasion and cutting when in contact with a sharp edge in the event of a fall. An LPA lanyard, with respect to a standard shock-absorbing lanyard with tear-type absorber, provides several advantages for the user : more compact, lighter-weight and enhanced ergonomics ensuring comfortable use. The LPA lanyard satisfies the requirements of standard EN355.
    Tractel "LSEA" Energy Absorbing Fall Arrest Elastic Webbing Lanyard - 30mm Diameter With Integrated Energy Absorber The LSEA lanyards are formed by a strap made of rigid polyester fiber woven on an elastic fiber core. These elastic fibers have elongation properties which allow the lanyard to stretch by one-third of its contracted length. The outer strap, made of polyester fibers woven on the elastic fiber core, gives the elastic lanyards (LSE and LSEA) excellent resistance to abrasion and cutting when it comes into contact with a sharp edge, including in the event of a fall. With respect to standard lanyards, the LSEA lanyards provide the advantage of being more compact and therefore more comfortable in use. With respect to the elastic lanyards currently on the market, formed by a tubular strap with an elastic material inside the lanyard, the Tractel LSEA elastic lanyards provide a much higher degree of resistance to ageing (the strap keeps its elasticity much longer) and has a much more attractive design. The LSEA elastic lanyard complies with the requirements of standard EN 355.
    Tractel "LSE" Elastic Webbing Restraint Lanyard - No Energy Absorber The LSE elastic lanyards are lanyards formed by a strap made of rigid polyester fiber woven on an elastic fiber core. This elastic fiber has elongation properties which allow the lanyard to stretch by one-third of its contracted length. The outer strap, made of polyester fibers woven on the elastic fiber core, gives the elastic lanyards LSE excellent resistance to abrasion and cutting when it comes into contact with a sharp edge, including in the event of a fall. The LSE elastic lanyard complies with the requirements of standard EN 354.
    Tractel "Derope Std" Consistent Descent Speed of 2m/s TheDerope™ descender is a controlled-speed evacuation device. It is designed to evacuate either one person (up to 150 kg) for a height of up to 400 meters or 2 persons (up to 25 kg) for a height of up to 200 meters. The system allows for sequencing several consecutive round-trip descents, thus making it possible to descend groups of persons, while monitoring the maximum number of consecutive descents authorized. The Derope™ descender is designed for use on sites located at heights which could require emergency evacuation, such as wind turbines, aerial cable cars, derricks, etc. The Tractel® Derope™ range can be used at temperatures between +50°C and –35°C.
    Tractel "Derope UP A" rescue descent device fitted with recovery winch. The Derope™ descender is a controlled-speed evacuation device. It is designed to evacuate either one person (up to 150 kg) for a height of up to 400 meters or 2 persons (up to 225 kg) for a height of up to 200 meters. The system allows for sequencing several consecutive round-trip descents, thus making it possible to descend groups of persons, while monitoring the maximum number of consecutive descents authorized. The Derope™ descender is designed for use on sites located at heights which could require emergency evacuation, such as wind turbines, aerial cable cars, derricks, etc. The Derope™ UP A is a descender equipped with a rescue winch enabling upward and downward evacuation.
    Tractel "Derope UP B" With Large Bracket for Mounting to a Ladder The Derope™ descender is a controlled-speed evacuation device. It is designed to evacuate either one person (up to 150 kg) for a height of up to 400 meters or 2 persons (up to 225 kg) for a height of up to 200 meters. The system allows for sequencing several consecutive round-trip descents, thus making it possible to descend groups of persons, while monitoring the maximum number of consecutive descents authorized. The Derope™ UP B is a descender equipped with a rescue winch enabling upward and downward evacuation. It is identical to the Derope UP A, but comes with a large bracket for mounting to a ladder.
    Tractel "Derope UP K" with Small Bracket for Mounting to a Ladder The Derope™ descender is a controlled-speed evacuation device. It is designed to evacuate either one person (up to 150 kg) for a height of up to 400 meters or 2 persons (up to 225 kg) for a height of up to 200 meters. The system allows for sequencing several consecutive round-trip descents, thus making it possible to descend groups of persons, while monitoring the maximum number of consecutive descents authorized. The Derope™ UP K is a descender equipped with a rescue winch enabling upward and downward evacuation. It is identical to the Derope UP A, but comes with a small bracket for mounting to a ladder.
    Tractel Fall arrest harness complies with EN360 and EN1497

    The HT22R is from the HT22 range and features a back anchor point, a chest anchor point and adjustable thoracique webbing with quick fitting buckle. This model featues a rescue strap to enable vertical lifting. Weight : 720 g. Size : S, M, XL. Working belt, size : S, M, XL. Thermo-compressed foam shoulder pad. Thigh straps adjustment : quick fitting buckles.

    Tractel Stopfor "KSM" Braided Rope Guided Fall Arrestor Device - Optional Connectors and Rope The Stopfor KSM, is the Stopfor K version ensuring correct mounting of the device on the rope, in the proper direction, by its upside-down mounting prevention system integrated in the device and allowing movement along the rope by intentional manual action on the device. Unlike the Stopfor K for which movement along the rope takes place in accordance with the user’s movement, the Stopfor KSM, with reinforced cam spring stays in position on the rope so long as it has not been released by the user.
    The Stopfor KSM is made of aluminium. It is lightweight, robust, ergonomic and compact. The Stopfor KSM connects to all the harness fall arrest anchorpoints, either by a type M10 connector or by a short 30 cm lanyard.
    Tractel Stopfor S guided rope fall arrestor device - Optional Connectors and Rope The Stopfor S is an individual, vertical, sliding fall arrest device. It ensures protection against falls when a user moves vertically along an anchorage line (textile rope), but provides  free vertical movement at normal speed. The housing may be opened by using the captive screw and flat bolt. Locking is due to the differential speed which engages an eccentric cam during the fall, between the user and the device on its support. The energy is absorbed by the lengthening of the support (>10%) and by the sliding movement along it. The device has a locking ring which prevents attachment to the support upside down. An arrow indicates the correct direction of movement and position for attachment to the support.
    Wire ropes for use in Tirfor™ and Jockey™ cable pulling machines from Tractel.
    Accessories for use in Jockey, Tirfor, Minifor and Tirak machines from Tractel.
    Standard wire ropes for use in Tirak™ cable pulling / lifting machines from Tractel. Anti-spin version available upon request.
    Tractel "Double In-line" Pulley Twin sheave in-line pulley For use in rope bridge evacuation.
    Tractel "Standard S" Pulley for 13mm Ø Braided Rope

    Lightweight and compact. Suitable for lifting and load deviations.

    High strength. Can be coupled with a mechanical ascender.

    Tractel "Standard S" Pulley

    The Standard S pulley is for use with specific short-term applications(lifting or hoisting)

    It is a light-weight, high-strength device, which is easy to use, thanks to swing side plates.

    Tractel "Standard M" Pulley

    The Standard M pulley is for use with specific short-term applications(lifting or hoisting)

    It is a light-weight, high-strength device, which is easy to use, thanks to swing side plates.

     

    Tractel "Double Pulley"

    The Double pulley is for use with reevings and hoistings.

    It is a light-weight, high-strength device and very efficient thanks to the parrallel sheaves.

    Tractel "Ascent Clamp". Adjustable strap foot loop

    The handle, equipped with an ascending loop used with a rope clamp, enables independent upward movement along a rope.

    The rope clamps are used independently for rope manoeuvres.
    The ascending loop is made of 20 mm PA strap, adjustable from 0.80 to 1.60 m.

    Tractel "Anchor Plate" Allows to remount on the cord in conjunction with Right or Left ascent handle.
    Tractel Stopfor "SK" braided rope guided fall arrestor device - 15m of 12mm Rope Supplied The STOPFOR SK is a manual sliding fall arrester used with a rope. The STOPFOR SK is compact and ergonomic and is equipped with an energy absorber, for use on sloping planes, such as roofs. The STOPFOR SK is lightweight, compact and ergonomic and  is manufactured using high-strength cast aluminium. The device is moved along the rope by simply pressing on the jaw. In the event of a fall, the device automatically locks. The STOPFOR SK slide is equipped with an energy absorber fitted with a connector M12 at one end and a connector M13 at the other.
    Tirfor Heavy Duty Galvanised Steel Body Cable Pulling / Lifting Machine.

    Tirfor T500 Series Manual Cable Pullers offer three options, very similar to the Tractel TU range of cable pulling and lifting machines. These are the genuine Tirfor machines for all lifting and pulling applications.  A telescopic operating handle is included in the price and a length of wire rope is supplied to suit your application. These are the best made pulling/positioning machine used in mechanical engineering, forestry, construction, mining and many other industries.

    Available in 800kg, 1600kg and 3200kg capacities.

    Tirfor TU Series with Aluminium body top of the range Heavy Duty design.

    The genuine Tirfor machine for all lifting and pulling applications, where only the best will do. All TU series Tirfors can be used with an unlimited length of wire rope. Operates by hand-over-hand principle. The two hands represent the 2 jaws of the machine. They grip the wire rope without damaging it, and alternately pull it forward during the operation and hold it during reverse operation. The effort is transferred to the jaws by two levers, one for forward operation and the other for reverse operation. The load is held securely at all times.

    Available in 800kg, 1600kg and 3200kg capacities.

    Man-riding Push Travel Trolley Anchor.

    The rollbeam mobile anchorage device is used to create a permanent or semi-permanent anchorage fitted on an H-shaped bar. The trolley moves along the lower flange of the bar, fitted with a ring for attaching the block for retractable lifeline or a standard lifeline. Adjustable from 58mm to 220mm depending on the width of the flange.

    Roll Clamp Dover Clamp Beam Anchor Point which Rolls along an R.S.J. The Tractel Rollclamp (dover clamp) beam anchors are mobile anchorage devices which meet the requirements of construction workers who require the capability to work safely while retaining freedom of movement. The dover clamp has 4 rollers which enable it to follow the construction worker as he moves on the structure, with minimum effort from the worker.
    Fall Arrest Temporary Lifeline with Tirfor for Tensioning. Complies with EN795

    The Tirsafe is an energy absorber for temporary horizontal lifeline systems (HLLs) for up to 3 workers. It is the first in the industry to incorporate a tension indicator that lets you know when your line is correctly tensioned. The deployment activation force and tension indicator aspects of the Tirsafe result from tension spring/housing resistance. This clever design indicates correct tension when the knurled ring appears in the indicator window.

    Temporary Horizontal Lifeline for a Maximum of 2 People. Ratchet tensioning mechanism. Conforms to EN795

    Tractel Travsafe Webbing Temporary Fall Arrest Lifeline can be used by two people, with synthetic fibre webbing straps that are adjustable from 0 to 18m. This Lightweight lifeline allows total freedom of horizontal movement. Easy and quick to install when there are two anchoring points offering sufficient resistance.

    Stopcable Is a vertical fall arrest wire line Vertical Lifeline for fixing to ladders etc...

    The purpose of the Stopcable system is to ensure the safety of personnel throughout their ascent. The Stopcable vertical lifeline is a mobile anchoring device to enable a person to move on a vertical axis in perfect safety and without having to disconnect themselves; it is made up of a fixed point and individual mobile equipment. Top and bottom anchor points Materials: Galvanised and stainless steel.

    Double Safety Descent Device.

    The TRACTEL double safety descender device has a hinged mechanism. It enables upwards and downwards movements on a 9~12 mm halyard. This descender device is equipped with an anti-panic safety mechanism (i.e. if the operator tensely grips the control handle of the apparatus, the descender device will block) and with a dead man’s handle (i.e. if the operator releases the control handle, the apparatus
    will stop).

     

    Roof Anchor designed to be directly secured to the wood beams of a roof framework.

    Roof anchors are designed to be directly secured to the wood beams of a roof framework. Anchor shapes (straight, arched or spiral) are designed to match with the type of roofing used. Available in different models: flat anchor, bowed anchor and twisted anchor. Each are available in galvanised or stainless steel with fastening pins and annular rings.

    Twin Wire Fall Arrest Horizontal Lifeline System.

    Tractel Travsafe Twin Wire Horizontal Fall Arrest Lifeline System gives freedom to move while working at height and can be used for either fall arrest or restraint ensuring safety whilst traversing horizontally over any given distance. The twin wires allow for a much greater factor of safety and applied loading than traditional single wire systems.

    Rope Winch Rescue Kit used by the maintain rescue services.

    Professional rescue kit can come with a range of various different options - Carry bag, rope bag, rescue pole, anchorage sling, helmet, pulley wheel, edge protectors, tag line, and scorpion PFL. Also available with different rope lengths - 10m, 20m, 30m, 40m, 50m , 66m, 100m, and 200m.

    Powered Climbing Aid for vertical ladders, Saves climber’s strength and Reduces climbing time.

    The Powered Climbing Aid improves the operational safety by causing less stress on the arms and legs, which keeps the heartbeat closer to rest level, the need to rest is decreased. Therefore the danger of incidents due to exhaustion is efficiently reduced. So that, all in all, these benefits essentially improve the operational safety.

    Manual cable hoist for lifting persons. Models TU6P TU12P TU24P Tractel Manriding Tirfor cable hoist certified for lifting people. This range of man-riding certified Tirfors are available in three different sizes, 600kg, 1200kg and 2400kg capacity. The capacity selected will be to suit the lifting platform in which they are to be used and the number of people/tools and equipment to be lifted. These 'Man-riding' lifting machines must be used with a secondary safety device such as the Blockstop fall arrest device to be fitted to a separate/independent rope; thus providing a fall arrest plan. Consideration must also be made to have a rescue plan in place.
    Jockey winches are portable manual lifting and pulling hoists with Infinite HOL (Rope length)

    They are light-weight and easy to carry. The winch can be installed quickly and is therefore suitable for occasional use; it is operated by a lever. Option: the load capacity of the device can be increased with sheave blocks.

    Available in 300kg or 500kg capacities.

    Pneumatic pulling machine weighs only 40 kg. Infinite HOL (rope length)

    The Tirfor® Principle - A Tirfor® has neither wheels nor gears. Two jaws alternately pull the wire rope and the load in the required direction, just like pulling on a rope with both hands. The jaws are self clamping, proving immediate and gradual safety. The heavier the load , the tighter they clamp. A release mechanism allows the wire rope to be inserted between the jaws.

    Features: Constant control of the load during lifting and lowering with accuracy to within one millimetre, when stationary the load is automatically distributed between the two jaw units, overload safety device, TU range approved for lifting personnel in most countries.

    Infinite wire rope length (HOL)

    The powered models of the TIRFOR machines complement the manual units for heavy loads, such as operating large work platforms, lifting shuttering, moving machinery, etc. Depending on the application, the working conditions and the power available, powered operation can be electro-hydraulic or pneumatic.

    Key Benefits: Saves time and labour, no operator fatigue, continuous operation, increased safety.

    Optional Hydraulic power pack with electric or petrol motor.

    The powered models of the TIRFOR machines complement the manual units for heavy loads, such as operating large work platforms, lifting shuttering, moving machinery, etc.
    Depending on the application, the working conditions and the power available, powered operation can be electro-hydraulic or pneumatic.
    Key Benefits: Saves time and labour; No operator fatique; Continuous operation; Increaded safety; One powerpack can power 4 Tirfor units all pulling/lifting the same load.

    Tirak Mobile electric winch / hoist for materials. 230v, 110v and 400v Options.

    The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope.  Features include: Terminal switch for limiting the height of lift wherever desired, emergency lowering in power failure at a controlled speed, electrical system suitable for use on building sites, easy to operate push button pendant control and heavier loads can be handled using winch with snatch blocks. Full safety features including limit switches and release/lower facility.

    A comprehensive range of universal, high performance portable electric hoists, for work at any height.

    Features include: Unlimited length of hoist cable adapted to the requirement, WLL 100 kg to 950 kg, integral handle for easy carrying,
    suitable for building sites, fast setup, unloaded wire rope freely suspended or optional rope reeler, pendant control or radio operation,
    direct lift or sheaving kit for increased capacity and a single phase or 3 phase motor.


    Universal, high performance portable electric hoists with spring loaded reeler, for work at any height.

    Features include: Unlimited length of hoist cable adapted to the requirement, spring loaded reeler, WLL 100 kg to 950 kg, light, easy to handle aluminium alloy design, integral handle for easy carrying, suitable for building sites, fast setup, efficient operation with swivelling suspension hook, extremely good weight/power ratio, reduced maintenance and pendant control or radio operation.

    Snatch pulley "scissor type" for use with wire rope.

    The swing blocks of EC type are mainly used for temporary applications for lifting or pulling. They can be su spended to a fixed or mobile anchorage point with the right strength corresponding to the required load. Thanks to an easy instalment and a light weight, this is the most current block used for repairing operations. These swing blocks are most often used as winch accessory on 4WD cars.

    Tractel EC Snatch Pulley Scissor Type are available in the following sizes - 1.6t, 3.2t, 5t, 8t.

    Sealed pulley. Tractel ES Simple Yoke Non-opening Pulley  are available in the following sizes - 0.32t, 0.63t, 1.2t.
    Heavy duty snatch block for off-shore purposes with stud shackle, hook or axle fixing. The snatch blocks of the ETA/ETC/ETM’s range are mainly used for temporary applications for pulling and lifting, when quick assemblies and/or dismantlings are required. They can be suspended to a fixed or mobile anchorage point with the right strength corresponding to the required load. Thanks to an easy instalment, a light weight and attached locking parts, these snatch blocks are most often used on vessels and off-shore platforms.
    Manual drum winches series TR (manual geared).

    Manual geared winches may be used for lifting or pulling a load and are available in two versions: one model with spur gearing and one with worm gearing. The cable is wound onto the drum by turning the crank. There is an automatic ratchet brake with stainless steel spring on both series and it's weather resistant with highly robust chassis and treated mechanical parts. There's also a safety device to prevent release of the machine when under load. Adjustable handle length.

    Manual drum winches series TS (worm geared).

    Carol winches are manual wire rope winches for installation in a permanent location. They may be used for lifting or pulling a load and are available in two versions: one model with spur gearing and one with worm gearing. The cable is wound onto the drum by turning the crank. The gears have been fully subjected to endurance and destruction tests. Hubs machined to retain lubrication. Automatic ratchet brake with stainless steel spring on both series. Drum released by an easily accessible lever. Safety device to prevent release of the machine when under load. Mechanism protected by a removable casing. Wire rope anchor point: Adaptable to various rope diameters without any special tool. Adjustable handle length makes it easy to use.

    Compact high performance robust powered drum winches with or without frame mounted. Single phase or 3 phase. Weatherproof: Made of pressed aluminium and polycarbonate which is moulded and coloured. Gearing: The helical gear teeth significantly reduce the noise level and gears are greased and sealed for life. Remote control: Low voltage(24V) push-button control with emergency stop and connection by 3 m flexible cable. Very high quality electrical wiring, protected under weatherproof cover. The electromagnetic brake holds the load as soon as the button on the remote control is released.
    For manriding applications a secondary braking device is mandatory, called BLOCSTOP.

    The BLOCSTOP is a fall-arrest secondary safety device which, when fitted to an appropriate TIRFOR / TIRAK wire rope, can be used in conjunction with almost any lifting equipment. Available with different capacities: 800kg, 1000kg, 1600kg, and 3200kg. While lifting a load or tensioning a wire rope the rope passes through the BLOCSTOP. There is no need to operate the BLOCSTOP. For lowering the load or releasing the wire rope the BLOCSTOP is opened by lifting the operating lever upwards.

    The "OVERSPEED" BLOCSTOP, type BSO is a safety device, used as fall arrest device for man-riding operations.

    When man-riding is concerned, no safety measure can be considered excessive; that is why the usage of the BLOCSTOP is required with the GRIPHOIST/TIRFOR. The safety device consists of a brake mechanism formed by a pair of self-clamping jaws pressed against each other by a powerful spring and enclosed casing. BLOCSTOPS are UL classified as independent secondary brakes. Responding to the strictest safety regulations they can easily be attached to most fittings. The Tirfor jaw type unit feting the Blocstop closes on the suspension wire rope and as it grips over a large area causes no damage to the cable.

    Magnet lifter of the new generation For lifting finished or rough, flat or round ferrous loads. The Tractel MAGFOR range is manufactured with high power Néodyne Iron Bore magnets, which positioning propose a compact solution with an important and reliable force. The rotor which permits orientation of the magnetic strength on the load is positioned with an ergonomic and robust lever.
    The MAGFOR magnet lifters are fitted out with a safety locking device which is automatically engaged when the lever is in “activated position” in order to avoid any unintentional activation. For more safety, disactivating the MAGFOR requires use of both hands. Each magfor is also fitted out with a reinforced upper ring which offers a large opening for asy positioning of the lifting device hook.
    High quality lightweight reliable low maintenance manual chain hoist and hooks with 360° swivel.

    Tralift Manual Chain Hoist from Tractel has a Hook suspension with 360° swivel, Tested to 150% of WLL, Automatic brake with double pawl system.

    Self-lubricating chain, corrosion resistant, made to standard NFE 26-010 (resists marine mists >800 h. and temperatures to 280° C). Optional load limiter.

    Available in sizes 250kg, 500kg, 1000kg, 1500kg, 2000kg, 3000kg, 5000kg, 10,000kg and 20,000kg.

    A safe and quick anchor point - A simple and reliable system.
    Available in 2 options of suspension, by hook or with a CORSO trolley (3 options available).

    This has adjustable upper and lower operational electrical limit switches, emergency stop on pendant control box, friction clutch load limiter operating as a safety limit switch. Robust, can be used with minimum headroom.  Reduced maintenance.

    Available in 125kg, 250kg, 500kg, 1000kg and 2000kg capacities.

    Kerb stone lifting, handling and transportation clamps. For manual lifting of kerb stones. Chain sling option also available for mechanical lifting.

    The Tractel BX is an handling accessory to transport and lay concrete kerbstones manually or using a 2 legged sling. A model with handlebars is available to ensure better stability when manually transporting kerbstones.

    Tractel Kerbstone clamps are available in the following sizes - 120kg/opening 1000mm, 100kg/opening 1000mm, 120kg/opening 915mm.

     

    Container lugs for lifting of containers by their standard ISO corners. This is to be used for the lifting of containers by their standard ISO corners
        CCB - Container lifted by the bottom, slantwise traction, lifting with a single lifting beam and two 2-legged slings.
        CCV - Container lifted by the top or bottom, vertical traction, lifting with a spreader frame and 4 slings.

    Features: Manufacture without load bearing welds; Hot epoxy coating; Working temperature: -20° to +100°C.
       
    Pipe hooks used in pairs for the lifting of cast iron or steel construction pipes such as drainage systems.

    The Tractel TOPAL F is a handling hook designed to horizontally lift cast iron or steel pipes. These hooks are specifically designed to be used in pairs with a wire rope, chain or strap 2 legged sling.

    Tractel TOPAL F pipe hooks are available in the following sizes:1000kg/opening 0 - 60mm, 2500kg/opening 0 - 75mm,5000kg/opening 0 - 100mm, 7500kg/opening 0 - 100mm.

    Beam Clamp with clamping and locking screw, can also be used to lift girders when used in pairs. This clamp is designed to provide a permanent or semi-permanent suspension point on girders, to suspend hoists, lifting beams, pulleys, etc.  It can also lift girders when used in pairs with a lifting beam. These beam clamps are fitted with a screw allowing the locking in position for providing an hanging point. One of the arms slides, therefore allowing the easy positioning and clamping of the loaded beam clamp. The use is made easier thanks to a handle.
    Semi-automatic clamp for horizontal steel drum lifting.

    Accessory equipped with an automatic locking system allowing the drums laying down without any manual intervention. Clamping is proportional to the load, thus minimising the damage risk to the drum.

    Tractel topal drum clamp - 500kg/opening 400 - 920mm.

    For lifting a girder by the flange while maintaining the web vertical.

    This clamp is fitted with a safety spring mechanism allowing permanent contact of the cam on the load to be lifted, even when it is being laid down. This model is also equipped with automatic grasping ensuring the clamp closes when the plate or profile is positioned at the back of the clamp’s throat. The locking lever does not stick out to ensure that it cannot be damaged. The corrugated cam only marks one side of the load.

    Clamp opening of 0-15mm to 0-30mm. The clamps are fitted with a safety spring mechanism for a permanent contact onto the piece to be lifted, even when it is being put down. The locking lever does not stick out so the clamp may be used on the bare ground.  The corrugated cam only marks one side of the load.


    Lever for separating plates. The lever is fitted with a sliding shaft allowing the placing of its end between the plates.
    Various opening widths from 0-20mm up to 100-150mm.

    The clamps are fitted with a safety spring mechanism for a permanent contact of the cam onto the piece to be lifted, even when it's being put down. This has an automatic grasping system, ensuring the clamp locks when the plate is correctly positioned. The locking lever does not stick out so the clamp may be used on the bare ground. The corrugated cam only marks one side of the load.

    Also available with adjustable opening.

    This is a clamp for lifting in all positions without marking the surface of smooth or polished pieces of stainless steel, aluminium, laminated wood, concrete, plastic, glass plates and welded plate assemblies. This clamp is fitted with an automatic gripping mechanism: the locking handle is designed to fit the clamp over the edge of the object to be moved and the automatic locking on the trigger grips the piece to be lifted.

     

     

    Topal PB scissor action lifting clamp with jaw opening ranges from 0 to 1000mm (various options).

    This grab can be used for vertical lifting, without marking, all products with parallel sides made of various materials: concrete, steel, plastic, wood, marble, etc. These accessories are fitted with an automatic lower lock which allows the load to lay down without any manual intervention. Rubber coated pads ensure a great adherence and avoid load marking. Transport handles make the positioning easier. Clamping is proportional to the load, thus limiting the damage risk.

    Safe working loads of 1500kg or 3000kg available with swivel hook attchment.

    PC Swivel Hook Forklift Truck Attachment from Topal Industries.

    • Provides an hanging point on fork lift trucks to handle loads.

    • These accessories are fitted with an immobilizing system on the fork lift truck tines ensuring that lifting operations are performed safely.
    PL girder clamp to horizontally lift I or H girders. These grabs are designed to be used in pairs with a lifting beam. These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.
    TOPAL adjustable clamp.

    This is designed for lifting without marking of products with parallel sides made of various materials such as wood, concrete, steel, plastic and rock. These accessories are fitted with an open position locking system allowing the positioning of the load. Rubber coated pads ensure a great adherence and avoid load marking. Clamping is proportional to the load, thus minimising the damage risk.

    Tractel TOPAL PP adjustable clamp - 1000kg/jaw opening 200 - 1000mm.

    Rail Clamp. These clamps are designed to be used in pairs with a lifting beam. Lifting of Vignole type rails from 15 to 30 kg/ m and up to 36 to 60 kg/ m.

    These accessories are fitted with an open position locking system allowing the laying down of the load without any manual intervention.
    Simple (QS) or double (QR/ QX) hooks for lifting horizontal plates individually or in bundles. QX : also enable the separation of horizontal piled plates. QS: use in 4s with lifting beam and 2-legged slings.
    QR: use in pairs and 1 4-legged sling.
    QX: use in pairs and 1 2-legged sling.
    TOPAL industries manhole hooks.

    The Tractel TOPAL Manhole Hooks are used for lifting vertical wells of round, square or rectangular concrete. The hooks have a grooved surface that ensures perfect grip on the materials in case of shock whilst moving the load.

    Their use does not require any adjustment and the positioning is easier thanks to ergonomic handles.

    Pipe and bar clamps for the lifting of round bars, tubes, square and small sections in bundles or individually.

    The Tractel TOPAL RT is used for the lifting of rods, tubes, profiles and various small squares in circles or bundles. Once it's locked in the open position this allows you to deposit the load without any action on the caliper. These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.

    .
    Beam for lifting and laying cone-shaped concrete manholes, Topal SCX, Topal CX.

    The CX ensures contact at two points of loading. The SCX is more robust for intensive use and ensures 3 point loading. These accessories are fitted with polyurethane coated pads which enable the handling of cone shaped manholes without marking. Delivery includes a chain sling (CX1 model).

    Lifting of horizontal tubes of various materials using a 2-arm sling.

    The Tractel TOPAL TB are hooks for use in pairs to lift pipes with a large opening, fitted with long handles for easy handling. Working in pairs with a 2-arm sling the load is lifted in a horizontal position.




    Automatic load positioner for rope sling.

    When lifting, the rope sling locks itself around the ring thanks to a round turn and the polyurethane coated pads will engage and grip the inner wall.

     

    Horizontal Clamp with opening of upto 900mm.

    This is an accessory to transport horizontal pipes and lay them into trenches. Also designed to transport bars and tubes of any material.

    S = semi-automatic laying down - Semi-automatic model: manual grab action and automatic locking of the grab in the open position.
    A = automatic clamping + laying down - Automatic model: the grab and laying down operation is performed without any manual operation from the operator on the grab.


    Universal drum cable hooks for use in pairs, each hook has a WLL of 6500kg.

    These hooks are designed to be used in pairs with shackles and 2-legged sling(rope, chain or strap). These accessories are adapted to many cable drums. They fit holes with diameters from 55 to 83 mm. Slings and shackles not provided.

    For Lifting drums in the vertical or horizontal plane

    The Tractel TOPAL VDL Clamp is a handling accessory to lift open or closed vertical metal drums with edges (Standard drums with edge on each face).


     

    VFR = Semi-automatic, VFA = Full automatic clamps for vertical steel drum lifting.

    These grabs are for lifting standard metal drums in vertical position (capacity 225 litres).Clamping is proportional to the load, thus minimising drum’s deformation risk.

    Rubber coated pads ensure a great adherence and avoid marking the drums

     

    Grabs for lifting and turning standard metal drums.

    Grabs for lifting and turning standard metal drums (capacity 225 litres). The drum can be gripped vertically or horizontally. An indexing enables it to be held in position in both cases.

    VFB 03 S - This model is fitted with an open position locking system to set down the drum without having to operate the grab.

    VFB 03 A - This model is fitted with an automatic device to grip and set down the drum without having to operate the grab.

    VFB 03 AR - This model is also fitted with a reduction gear to gradually empty the drum without effort.





    Handling accessory to lift metal drums with edges, diameter 600 mm, open or closed in the vertical position. This model is fitted with a safety locking device via the operating handle.

    The VLF is equipped with a system of rim pinching. The handle makes the clamp's positioning and locking onto the drum is easier. Clamping is proportional to the load, thus minimising the damage risk.

    Price is per clamp and does not include the chain sling.

    Pal-Beam Upper Hooking By Central Ring.

    Topal Industries PBF Lifting Beam for Pal-Turn.

    • WLL 1000 kg to 5000 kg.
    • Usefull working length 1000mm to 4000mm.
    • Suspension from above via a central ring.
    Adjustable Single Lifting Beams.

    Topal Industries PBM Single Beam Spreader.

    • Suspension from above via central ring with 2 separate compensating beams.
    • WLL 1000 kg to 5000 kg.
    • Usefull length of 1000 mm to 4000 mm.
    Hydraulic toe jacks for lifting loads prior to use of floor skates.

    Available in capacities of: 5 Tonne, 10 Tonne and 25 Tonne.

    Floor handling of heavy loads up to 390 mm lift. Robust and maintenance free, this type of jack is fully adapted to be used on worksite.

    Tractel BT top toe jack.

    • Robust construction.
    • Working Load Limit applied on head and toe (except for models 16 and 20t).
    • The folding handle of the crank reduces the overall dimension of the jack during transport.
    • The gear wheels, the pinions and the rack are made of heat treated steel.
    Digital Weigher Checking Loads and Measuring Tensile Forces. Battery life upto 850 hours.

    Tractel Dynafor LLZ Digital Weighers are available in the following sizes - 250kg, 500kg, 1000kg, 2000kg, 3200kg, 6400kg, 10,000kg, 20,000kg.

    Electronic Traction Dynamometers.

    Tractel Dynafor LLXH are available in the following sizes - 15,000kg, 25,000kg, 50,000kg, 100,000kg, 250,000kg.

    Tractel Dynafor LLXH are available with or without a display.

    Electronic dynamometer with removable display unit.

    Tractel Dynafor LLX2 are available in the following sizes - 500kg, 1000kg, 2000kg, 3200kg, 5000kg, 6300kg, 10,000kg.

    Available with or without display.

    Load indicator with a permanent hanging ring and hook (with safety latch), Digital readout with optional wireless remote display and control.

    The Dynafor® MWX gives you the possibility to control and measure loads on cranes. It has great work autonomy of up to 700 hours battery life. The MWX, with its LCD readout, programmable functions, and remote display, is ideal for weighing with cranes. Models 2.5 to 12.5 t are available with infrared control and LCD, remote read-out.

    Available in sizes 500kg, 1000kg, 2000kg, 3200kg, 5000kg, 6300kg, 12,500kg, and 25,000kg.

    This mechanical load cell has been designed to provide a trip point for lifting systems which have a dead end wire rope.

    Tractel DynaSafe are available in the following

    HF 32A 1 trip point rope sizes as followers 5 -10mm 5-16mm 17-26mm 27-36mm, 2 trip points rope sizes as followers 5 - 16mm, 17 - 26mm, 27 - 36mm.

    HF 32B 1 trip point - 5 - 16mm, 17 - 26mm, 27 - 36mm, 2 point trip 5 - 10mm, 5 - 16mm, 17 - 26mm, 27 - 36mm.

    Suspended working platforms, ALTA "L" suited to lightweight applications, ALTA "S" is used for heavy applications such as facades, chimneys, silos and bridges.

    The Alta "L" ia a model perfectly suited to lightweight applications such as painting and decorating, refurbishing, jointing abd repairs, windows cleaning. The complete system consists of the  working platform equipped with two electric TIRAK® hoists and the  support wheels, suspended by means of steel wire ropes from a  suspension structure.

    The ALTA "S" platform is to be used on heavy applications such as facades, chimneys, silos, bridges. The complete system consists of the working platform equipped with two electric TIRAK® hoists suspended by means of steel wire ropes from a suspension structure.

    General use safety harness to EN361. Harness With a back attachment element (forged D). Chest belt fitted with quick-release buckle. Weight : 700 g. Size from : S, M, XL. Adjustable working belt. Thermo-compressed foam shoulder pad. Features - Buckles - metal : yellow zinc bichromated, stamped : yellow zinc bichromated. Plastic components : Polyester. PES webbings, colour-fast, width: 45 mm. Machine stitched : PES 12/3 black. CE Certification - No : 0082/352/160/04/04/0101 Notified body : APAVE CE0082 Standards - EN 361. Sizes Available - S, M, XL.
    Complies with EN 361 standard available in 3 sizes S, M, XL to EN361. Back attachment element (forged D). Single adjustment with pelvic strap Chest belt fitted with quick-release buckle. Weight : 750 g. Size from S, M, XL. Adjustable working belt. Thermo-compressed foam shoulder pad. Sub-pelvic strap. Thigh straps adjustment : quick fitting buckles. Buckles - metal : yellow zinc bichromated, stamped : yellow zinc bichromated. Plastic components : Polyester. PES webbings, colour-fast, width: 45 mm. Machine stitched : PES 12/3 black. CE Certification N°: 0082/352/160/04/04/0099 Notified body : APAVE (N°0082). EN 361.
    Multi purpose harness ideal for use within the industrial maintenance sectors to EN361. Tractel HT 45 Harness - multiple purpose utilization, particularly in an industrial maintenance environment very comfortable to use over extended work periods, thanks to its harness-type leg straps possibility for using a fall arrest connected to sternal anchorage.blue harness with black seat straps straps made of 45mm polyester buckles made of zinged steel adjustment buckles made of yellow dichromate steel. Main Components of HT45 Harness 1 back fastening point, 1 sternal anchorage 2 leg strap adjustments 2 shoulder strap adjustments 1 sternal adjustment.
    Multi purpose harness ideal for use within the industrial maintenance sectors to EN361. Tractel HT 46 Harness - multiple purpose utilization, particularly in an industrial maintenance environment, very comfortable to use over extended work periods, thanks to its harness-type leg straps, possibility for using a restraining lanyard when in the work position, connected to two chest fastening points. Possibility for using a fall arrest connected to sternal anchorage. Blue harness with black seat straps straps made of 45mm polyester, Buckles made of singed steel adjustment, Buckles made of yellow dichromate steel. Main Components of HT46 Safety Harness 1 back fastening point 1 sternal anchorage 2 chest anchorage 2 leg strap adjustments 2 shoulder strap adjustments 1 sternal adjustment.
    The Ladytrac harness collection is the first range of safety harnesses which have been specially designed for women to EN361 & EN358. Tractel Ladies Safety Harness is designed for women. Its patented design prevents positioning and friction of the harness strap against the chest. The harness includes an ergonomic jacket for optimum comfort. This vest, made of ventilated stretch fabric, is equipped with multiple Velcro fasteners and adapts to all body shapes, also equipped with automatic closure buckles for precise strap adjustments. Available in sizes S, M and XL 1 dorsal D-ring, 2 sub-pelvic automatic buckle adjustment points 1 belt with back support 1 adjustable jacket of stretch fabric and poly cotton Weight : 920g
    Manriding hoist with integral blocstop for use with secondary safety rope, Safe Working Load 400kg.

    The SCAFOR is a lightweight manual hoist which has been especially designed for light suspended platforms fitted with two hoists or for bosun's chairs or one-man cradles  fitted with a single hoist. The SCARFOR hoist can be fitted to painters cradles, bonsuns chairs and one-man cradles, and platforms with fixed or articulated stirrups. Available in 2 models - Scarfor 406C** and Scarfor 408C**. Rope lengths Available - 10m, 15m, 20m, 25m, 30m, 40m, 50m, and 60m.

    Single seat temporary suspended seat with integrated Tirak hoist and Blocstop safety device. Lightweight design and extremely stable, the SOLSIT one-man seat offers a fast means of access with a safe and reliable working position for many inspection, maintenance, cleaning and assembly operations. The reliability of the powered TIRAK hoist, combined with the BLOCSTOP safety device, mounted on a secondary safety wire rope to ensure complete safety of the operator, essential for
    equipment used for lifting people. The two adjustable rollers rest against the facade to prevent spinning and excessive swaying.
    Harness with sub pelvic type mountain leg strap to EN361.

    This is a harness with sub pelvic type mountain leg strap, in order to give a contort maximum to the user. It has 1 back anchorage point and 2 thoracic anchorage points with 5 adjustments : 2 adjustment of leg 2 adjustment of shoulder, 1 adjustment of eternal strap. Their ergonomic design ensures optimum comfort. They are designed for work carried out over long periods. This harnesses is many use for a little work on pylon for electricity and telecommunication. Available in sizes S, M and XL.

    HT44BA harness with multiple purpose utilization, particularly in an industrial maintenance environment to EN361. Tractel HT44BA harness is derived from the HT44 to which three automatic buckles have been integrated to facilitate fitting by a quick-closure system and an easy-to-adjust design. The product’s technical image is enhanced by the three automatic buckles.Available in sizes S, M and XL. The HT44A safety harness complies with the requirements of standard EN 361. The HT44A safety harness comes in three sizes: S / M / XL. Blue harness with back seat straps. Straps made of 45mm polyester. Automatic buckles made from stainless steel and aluminum Adjustment buckles made from dichromate steel. Main components. One back fastening point. Two chest fastening points. 2 leg strap adjustments. 2 shoulder strap adjustments. 1 sternal adjustment.
    HT46BA safety harness in sizes S, M, XL to EN361.

    Tractel HT46BA Harness is derived from the HT44 to which three automatic buckles have been integrated to facilitate fitting by a quick-closure system and an easy-to-adjust design. It has 1 back anchorage point 1 sternal anchorage and 2 chest anchorage. Very comfortable to use over extended work periods, thanks to its harness-type leg straps. There's possibility for using a restraining lanyard when in the work position, connected to two chest fastening points, also possibility for using a fall arrest connected to sternal anchorage. Available in sizes S, M and XL.

    Fall arrest harness with a back anchor point to EN361. The Tractel HT42 Harness specification - Buckles: Metal yellow zinc bichromated, stamped: yellow zinc bichromated. Plastic components: PP PE webbing's, colour-fast, width: 45mm Machine stitched: PE 12/3 Two thoracique anchor point. Adjustable thoracique webbing with quick fitting buckle. Weight: 910g Size: S, M, XL Complies with Standard EN 361 1 dorsal “Forged D clip” and 2 thoracic ones 4 adjustment points Sub-pelvic strap Associated equipment Anchorage (EN 795) Connectors (EN 362) Anchor device (EN 363).
    Harness with 1 dorsal Forged D clip, 1 sternal and 2 thoracic ones to EN361. The Tractel HT43 Harness Buckles: Metal: yellow zinc bichromated, stamped: yellow zinc bichromated Plastic components: PP PE webbing's, colour-fast, Width: 45mm Machine stitched: PE 12/3 Back anchor point: yellow zinc bichromated. A chest anchor point. Adjustable thoracique webbing with quick fitting buckle. Weight: 920g. Size: S, M, XL Associated equipment. Anchorage (EN 795) Connectors (EN 362) Anchor device (EN 363)
    Fall arrest harness with 5 adjustment points certified to EN361. The Tractel HT22BA - A back anchor point A chest anchor point Adjustable thoracique webbing with automatic buckle Weight 740g Size S, M, Extra Large Thigh strap adjustment: automatic buckles Metal yellow zinc bichromated Stamped yellow zinc bichromated Plastic components: PP PE webbing, width 45mm, load breaking 22kN Machine stitched: PE 1 dorsal and sternal “Forged D clip” 4 adjustment points. Sub-pelvic strap With automatic buckles Associated equipment. Anchorage (EN795) Connectors (EN362) Anchor device (EN 363).
    Fall arrest harness with quick fitting buckle to EN361. A back anchor point: Yellow zinc bichromated Adjustable thoracique webbing with quick fitting buckle. weight 790g sizes S, M, XL Adjustable working belt Buckles metal: yellow zinc bichromated - stamped: yellow zinc bichromated Plastic components: PP PE webbing's, colour-fast, width: 45mm Machine stitched: PE 12/3 Associated Equipment Anchorage (EN795) Connectors (EN362) Anchor device (EN363).
    Safety harness 1 dorsal Forged D clip and 2 thoracic to EN361. HT42BA Safety Harness, Specification - A back anchor point: Yellow zinc bichromated. Two thoracique anchor point. Adjustable thoracique webbing with automatic buckle. Weight: 920g. Size: S, M, XL. Thermo-compressed foam shoulder pad. Buckles metal: yellow zinc bichromated. Stamped: yellow zinc bichromated. Plastic components: PP. PE webbing's, colour-fast width:45mm. Machine stitched: PE 12/3. Complies with Standard EN 361. 1 dorsal “Forged D clip” and 2 thoracic ones. 4 adjustment points. Sub-pelvic strap. With automatic buckles.
    Roofer Safety Kit.

    Tractel 0408xx Roofer Restraint Height Safety Kit Contains : Tractel HT22 Harness, Stopfor ML 0,9 m, Rope mix 14mm, Connector M10, Combipro bag, Available in lengths of 10m, 15m, and 20m.

    Scaffolding assembly kit with HT22 harness.

    Tractel Scaffolding Kit comes with Tractel HT22 2 point Harness, Blocfor 1.8 fall arrest inertia reel and M51-M47 and a Pouch for carrying.

    Pruning kit with safety harness.

    Tractel Pruning Kit Contains : Safety harness, LCM03 3 40 jaw tensioning device on steel cable reinforced braided rope diameter 16mm, Rope mix 14mm, Stopfor ML 0,6m Manual fall prevention device, and Combipro bag. Available in 20 and 30m cable lengths.

    Industrial maintenance kit with 1.8m Webbing Personal Inertia Reel (Fall Arrest Block).

    Tractel 038432 Industrial Maintenance Kit 1 comes with HT31 Harness, AS 19, 0,6 m for anchoring on a structure on which a fall-arrest system has been installed. Blackfor 2W M10-M47 the blocfor range ensures an automatic braking function in the event of a fall; the fall height is restricted by the immediate brake reaction. Pouch zip fastening size 400mm x 290mm x 20mm.

    HT rescue harness with 2 forged aluminium support D rings. Conforms to EN358 EN361 EN831. The Tractel HT Rescue Harness is formed by a back anchorage point, a chest anchorage point, two holding anchorage points on the belt and a fabric umbilical suspension point. This harness can be put on quickly and is equipped with flat buckles. Available in sizes S, M and XL. 1 dorsal fastening point "D" ring. 1 sternal fastening point "D" ring 1 support belt. Adjustable shoulder straps. 2 forged aluminium support D rings Adjustable leg straps. Tool holders. Comfort shoulder straps
    HT prowin fall prevention harness for professional high height workers. EN358 EN361 EN831. The Tractel HT Prowin Harness designed for professionals carrying out high-level works, especially, as its name implies, for windows cleaners. Quick fitting adjustable of the shoulder straps, the belt and the thigh straps by a simple traction on quick fitting buckles. Available in sizes S, M and XL. Weight: 2,050kg Blue polyamide webbing 45mm width. Belt and thigh straps in thermofored foam covered with cordura fabric. D ring in forged steel Side anchorage point, zinc plated steel 25 CD4 CE type examination certificate Apave no 0082/352/160/02/03/0038 Complies with standard EN361, EN358, EN81
    HT Windmill Harness for working on windmill generators and electrical pylons to EN361 & EN358.

    The HT110 Windmill harness has been developed for users working on ladders equipped with a fall arrest system for rigid structures, such as the FABA Safety system or the Tractel Stop cable system, on windmill and telecoms installations.
    The harness features 1 back fall arrest attachment point, 1 chest fall arrest attachment point, 2 lateral attachment points for securing the work position and 1 belly attachment point for securing the work position.

    HT transport harness for electrical pylon working. Conforms to EN358 EN361 EN831.

    The Tractel HT Transport Harness is designed for interventions on pylons when working at great heights. The harness comprises a back anchorage point, a braided fabric chest anchorage point, two anchorage points on the belt and a stomach suspension point made of braided fabric. By its automatic buckles the harness is easy to fit. Available in S, M and XL.

    HT Intense Harness for maintaining position at work station to EN361 & EN358. The Tractel HT Intense Harness is designed for professionals carrying out at height work on masts with positioning practices. The Intense harness is designed for the confined spaces and for all other applications (poles, scaffolding's etc). Automatic belt buckles make the Intense harness quick and easy to adjust. Features include fall prevention device fastening point, forged dorsal and sternal "D" ring, 2 stitched buckles, lateral support fastening point, 2 large six forged buckles, floating belt allowing rotation of more or less 110°, 4 adjustment points, 1 automatic buckle, padded belt and shoulder straps. Available in sizes S, M and XL.
    Harness with adjustable thoracic webbing with quick fitting buckle to EN361 & EN358.

    The HT 33 harness with working belt incorporating side "D" for attaching a work positioning lanyard. adjustable with quick opening using a single set of buckles. Excess belt is held in position with elastic loops. The back support is made of thermoformed foam, The inside surface has a sponge type covering. Harness belt with A back anchor point: yellow zinc bichromated. Adjustable thoratic webbing with quick fitting buckle. Weight: 790 g. Size: S, M, XL. Associated equipment Anchorage (EN 795). Connectors (EN 362). Anchor device (EN 363). CE Certification N° belt 0082/352/160/05/97/0087 N° harness 0082/352/180/04/00/0164 Notified body: APAVE (N°0082).

    Harness, adjustable with quick opening using a single set of buckles to EN361 & EN358. The Tractel HT33A Harness conist of thigh straps adjustment: automatic quick fitting buckles. Buckles: yellow zinc bichromated, alloyed stamped: yellow zinc bichromated PE webbing's, width 45mm Machine stitched: Plastic components: PP A back anchor point: yellow zinc bichromated. Adjustable thoracique webbing with quick fitting buckle Weight: 790 g Size S, M, XL Belt Working belt incorporating side d for attaching a work positioning lanyard. Adjustable with quick opening using a single set of buckles. Excess belt is held in position with elastic loops. The back support is made of thermoformed foam. The inside surface has a sponge type covering. Options Thermo-compresses foam shoulder pad Associated equipment Anchorage Connectors, Anchor device, CE Certification N° belt 0082/352/160/05/97/0087 N° harness 0092/352/180/04/00/0164 Notified body: APAVE (N°0082).
    Multiple use harness with CE01 belt to EN361 & EN358. The harness mulitple anchor Side anchoring 2 D rings zinged steel Adjustable with quick opening 3 sizes available Lightweight Rot-proof 1 back anchor forged D 1 sternal anchor forged D 2 thoracic anchor forged D 2 shoulders adjustment 2 legs adjustments 1 working belt incorporating seide D for attaching a work positioning lanyard Adjustable with quick opening using a single set of buckles The back support is made of thermoformed foam. The inside surface has a sponge type covering.
    Working Belt with two lateral hitch D rings.

    Tractel work positioning belt is not designed to be used as a fall arrest device. Has 2 Stainless steel D rings for side anchorage, is adjustable with quick opening, and is lightweight and rot-proof. Can be combined with any tractel harness using belt loops making a fully integrated belt-harness assembly. Available in 3 sizes - Small, Medium and Extra large.

    Working Belt with 2 wide opening anchor rings.

    Tractel CE02 Working Belt has two wide opening anchor rings to provide side anchoring. This is adjustable with guide opening, and is also lightweight and rot-proof. Can be combined with any harness of our range, using belt loops making a fully integrated belt-harness assembly. Available in 3 sizes - Small, Medium and Extra large.

    Working Belt with two stainless steel 'D' rings.

    Tractel CE03 Adjustable Working Belt comes with 2 stainless steel D rings enabling side anchorage, adjustable with quick opening, this is a lightweight and rot-proof working belt. This working belt may be combined with any tractel harness, using loops making a fully integrated belt-harness assembly. Available in 3 sizes - Small, Medium and Extra large.

    American jacket designed to be suitable for HT22 and HT31 harness.

    The Tractel 37492 American Jacket has been designed to be suitable for the HT22 and HT31 harness in the Tractel range without belt. Once jacket has been positioned on the harness the straps can be quickly threaded through. Available in 2 sizes Medium and Extra large.

    Easy jacket adaptable to all harnesses with metal press studs.

    The Tractel Easy Jacket has been designed to fit all harnesses in the HT range, once position the straps can be quickly and easily threaded through. The easy jacket is made of orange polycotton. it is positioned on the harness using press studs. it unique shape means that it adapts to the design of the harness.

    French jacket.

    The Tractel French Jacket has been designed to be suitable for all the HT harnesses in the Tractel range without belts. Once jacket is positioned on the harness the straps can quickly be threaded through. Extremely comfortable and quick and easy to put on and off. One size only.

    Harness with 1 dorsal Forged D clip, 1 sternal and 2 thoracic ones to EN361. Automatic Buckles Buckles: Metal: yellow zinc bichromated, stamped: yellow zinc bichromated. Plastic components: PP. PE webbing's, colour-fast, Width: 45mm
    Machine stitched: PE 12/3. Back anchor point: yellow zinc bichromated. A chest anchor point. Adjustable thoracique webbing with quick fitting buckle. Weight: 920g. Size: S, M, XL
    Manriding Winch Includes a Bracket for Fixing to the Tracpode Tripod, Safe Working Load 250Kg

    The Carol rescue winch satisfies all rupture and endurance test requirements as per standard EN13157.It is designed for use with the Tractel Tracpode Tripod. The optional 5mm cable is available in 20m or 30m lengths. The carol winch can be used for work in suspension, if a second safety fall arrest is used. Tractel Carol Rescue Winch Datasheet. A Variable-length control crank handle (6 adjustment positions) allows the user to either apply maximum control force, or perform rapid cranking for small loads or rewinding. The Self-locking crank handle adjustment knob offers maximum user comfort and safety and allows for the adjusting of the crank handle or removal of it to prevent operation of the winch.

    Equipped with Rigging Bracket for Attaching to Tracpode Tripod The Derope™ descender is a controlled-speed evacuation device. It is designed to evacuate either one person (up to 150 kg) for a height of up to 400 meters or 2 persons (up to 225 kg) for a height of up to 200 meters. The system allows for sequencing several consecutive round-trip descents, thus making it possible to descend groups of persons, while monitoring the maximum number of consecutive descents authorized. The Derope™ descender is designed for use on sites located at heights which could require emergency evacuation, such as wind turbines, aerial cable cars, derricks, etc. The Tractel® Derope™ range can be used at temperatures between +50°C and –35°C. During the utilization the speed of descent is stabilized 2 meters maximum by second per load of 30 Kg to 225 Kg.
    Available in 14mm Spliced and Stitched TRACTEL® textile rope has a loop at one end and is machine-finished at the other. The loop must be connected to an anchorage point that has a minimum strength of 1T in accordance with the requirements of standard EN795. This anchorage point should preferably be installed at the TOP position. When the anchorage point is at ground level it is essential to protect the rope from sharp or abrasive edges. The rope must under no circumstances be connected below the work position of the user.
    The Ladytrac harness collection is the first range of safety harnesses which have been specially designed for women Tractel Ladies Safety Harness is designed for women. Its patented design prevents positioning and friction of the harness strap against the chest. The harness includes an ergonomic jacket for optimum comfort. This vest, made of ventilated stretch fabric, is equipped with multiple Velcro fasteners and adapts to all body shapes, also equipped with automatic closure buckles for precise strap adjustments. Available in sizes S, M and XL 1 dorsal D-ring, 2 sub-pelvic automatic buckle adjustment points 1 belt with back support 2 side D-rings on belt 1 belt automatic buckle adjustment point 1 adjustable jacket of stretch fabric and poly cotton Weight : 920g
    Harness with 1 dorsal Forged D clip, 1 sternal and 2 thoracic ones to EN 358 and EN361. Automatic Buckles The harness mulitple anchor Side anchoring 2 D rings zinged steel Adjustable with quick opening 3 sizes available Lightweight Rot-proof 1 back anchor forged D 1 sternal anchor forged D 2 thoracic anchor forged D 2 shoulders adjustment 2 legs adjustments 1 working belt incorporating seide D for attaching a work positioning lanyard. Adjustable with quick opening using a single set of automatic buckles The back support is made of thermoformed foam. The inside surface has a sponge type covering.
    Optional Rope and Connectors Available The STOPFOR M manual sliding textile rope grab is used to create a mobile anchor point on a textile rope. The Stopfor M is particularly suitable for work on sloping planes, for example on roofs. The STOPFOR M enables the user to anchor themself at their work position and work in total safety. Once he has completed his work he can return to a safe area by sliding the Stopfor M along the rope.
    LCR Reducing Lanyard The Tractel LCR is a positioning lanyard, whcih features one adjustable buckle, twisted rope of diameter 12 mm and one spliced buckle. weight : 260 g.This lanyard is used to support the person who is working, it is not a fall protection device.
    For use with 16mm Stranded rope

    The Tractel LCM 02 is a twisted rope, 16mm diameter, positioning lanyard with an aluminium blocking device with one stiched and spliced buckle. It comes complete with one M40 X-hook connector. Weight : 1060 g. These lanyyards are used to support the person who is working, they are not fall protection devices.

    For use with 16mm Stranded rope

    The Tractel LCM 02 is a twisted rope, 16mm diameter, positioning lanyard with a steel blocking device with one stiched and spliced buckle. It comes complete with one M40 X-hook connector. Weight : 1300 g. These lanyyards are used to support the person who is working, they are not fall protection devices. A 50cm protective sleeve is offered as an option on this product.

    Supplied with steel cable reinforced braided rope, diameter 16mm The Tractel LCM 03 is a steel cable reinforced braided rope (16mm diameter), positioning lanyard comprising of an aluminium blocking device with one stiched and spliced buckle. It comes complete with one M40 X-hook connector. Weight : 1080 g.These lanyyards are used to support the person who is working, they are not fall protection devices. A 50cm protective sleeve is offered as an option on this product.
    12mm Rope Lanyard with Energy Absorber The LCA Lanyard comes with an energy absorber and is used as a connecting element between a fixed, or mobile anchorage point, and the attachment point on the harness. It is made of 12mm  Stranded Polyamide Rope and comes in lengths of 1.5 or 2 metres. The choice of the length depends on the application but the height of fall increases the length of the lanyard required. A selection of connectors are available. The energy absorber is the type in which the textile weft tears . It limits the shock to which the user is subjected in the event of a fall to less than 5 KN and will stop a 4 m free fall.
    Twin Lanyard 12mm Stranded Polyamide Rope with Energy Absorber The LCAD Lanyard is a twin leg lanyard and comes with an energy absorber. It is used as a connecting element between a fixed, or mobile anchorage point, and the attachment point on the harness. It is made of 12mm  Stranded Polyamide Rope and comes in lengths of 1.5 or 2 metres. The choice of the length depends on the application but the height of fall increases thelength of the lanyard required. A selection of connectors are available.The energy absorber safely stops a fall from a height. Without a shock absorber a free fall of more than 50cm can cause serious injuries. The energy absorber is the type in which the textile weft tears . It limits the shock to which the user is subjected in the event of a fall to less than 5 KN and will stop a 4 m free fall.
    Optional Hydraulic power pack with electric or petrol motor. The powered models of the TIRFOR machines complement the manual units for heavy loads, such as operating large work platforms, lifting shuttering, moving machinery, etc.
    Depending on the application, the working conditions and the power available, powered operation can be electro-hydraulic or pneumatic.
    Key Benefits: Saves time and labour; No operator fatique; Continuous operation; Increaded safety; One powerpack can power 4 Tirfor units all pulling/lifting the same load.
    Easily Adjustable, Comfortable, Available with a Range of Accessories Introducing the TR2000, an innovative new height safety helmet. Easily adjustable, comfortable, available with a variety of accessories and competitively priced, the TR2000 is an essential addition to your height safety range.

    Also available with options that include Low Headroom and Dual lift versions.
    Manual safety pulley system with brake designed for temporary lifting installations on construction sites.
    Wire rope snatch blocks certified for both man-riding and materials handling applications. Various suspension options.
    Designed for work in the utilities industry, on pylons where a high degree of mobility is required, ensuring high amplitude of rotation (150°).
    Designed for work on ropes during extended-duration suspended interventions. 2 fall arrest points, 1 belly suspension point and 2 working positioning points on belt.
    Designed for movement (up or down) on structures equipped with an EN 353.1 rail or cable fall arrester device equipped with an approved fall arrest umbilical roll prevention system attachment point.
    Handifor micro-weighers are precision force sensors (0.5 % EM) used to measure tensile forces and to indicate loads
    Dynafor digital load indicator (load meter) for checking loads and measuring tensile forces.
    Self-retracting lifeline (SRL) with galvanised, stainless or synthetic cable options. Karabiner suspension with snap hook used connection point. EN360
    Fall arrest inertia reel block with energy dissapater system. Karabiner top connector and snap hook bottom.
    Durable hoist chain collector bag designed to hold excess load chain, quick and easy to fit, with a simple snap hook means of attachment to hoist body.
    Self-retracting lifeline (SRL) with galvanised, stainless steel or synthetic cable options. Eye for karabiner suspension and snap hook lower connection.
    Roof Truss Anchoring Device.

    Tractel Roof Truss Anchorage is made from steel, is designed to support wooden roof trusses. Complies to the standard CE EN 795 class A.

    EN795 Class B Beam Clamp Anchor with adjustable threaded bar.

    This hitching clamp is equipped with an anchoring ring, with a compact and strong construction; this can also be quickly and easily adjusted with its removable handle. It's adjustable from 75mm to 235mm.

    Door Bar Fall Arrest & Restraint Door Anchor Certified to EN795.

    Tractel 062217 Door Bar Fall Arrest & Restraint Anchorage is up to the standard of CE EN 795 class B. Suitable for use by up to 2 users. Spacing - 1100mm for 1 user. 800mm for 2 users. This is very fast and easy to setup. Must be used adjacent to the door opening.

    Edge protection for climbing ropes / rescue ropes from sharp or abrasive surfaces.

    Tractel Rope Protector is an edge protection for climbing ropes or rescue ropes from sharp or abrasive surfaces, preventing fraying or cutting of the rope. Made from lightweight aluminium.

    Evacuation harness with elastic shoulder strap, 30mm.

    Tractel Evacuation Harness HT9 is designed to evacuate a user who may be conscious or unconscious. The rescue harness has been developed for rescue teams and to evacuate users not equipped with a fall arrest safety harness.The adjustment elements of the triangular rescue harness HT9 are ensured by two automatic plastic loops by which the shoulder traps are adjusted.The triangular rescue harness HT9 is made using high strength synthetic fabric. The very-flexible fabric adjusts to the user’s shape.

    HT 110 Harness For Working on Windmill Turbine Generators and Electrical Pylons.

    The HT100 harness is for working on wind turbine generators and electricity pylons. It has a forged dorsal and sternal 'D' ring and two forged 'D' ring lateral support fastening points. Five adjustment points are on the harness and they have fast buckle prone leg strap adjustment. The harness is fitted with large capacity tool holders and comes with a padded belt and shoulder straps. The harness complies with standards EN358 and EN361.

    Capacity to take rope up to 80m Special bag for carrying of rope used with the Derope range of descenders. A reel in the bag allows for easy winding of rope.
    Mobifor anchorage system is a mobile, dead weight anchor device for use on roofs up to 5 degree pitch.
    Electronic tension load cell designed to measure effort applied to a wire rope without disassembling the rope.
    Cable Pulling Machine Y08, Y16 and Y32. A Quality Yale alternative to the Tractel versions.

    The wire Rope used for lifting and pulling fused and tapered at one end and the other end is terminated with a Crosby eye hook in heart shaped thimble secured by a mechanical splice. The Yaletrac is our reasonable quality alternative to the Tractel Tirfor products which we also offer. We consider it to be a good second best. Yaletrac® cable pullers feature a lightweight, compact, high strength aluminium housing, smooth contour design with a large, flat bottom surface for increased stability in horizontal and vertical working positions.

    Available in 800kg, 1600kg and 3200kg capacities.

    Tractel "Stopfor B" Support Lanyard Supplied with or without Sheath with one M41 connector and one M10 connector The Stopfor B LCM06 is a new-generation lanyard tensionerreducer. This device enables fine-adjustment of the rope length to within a millimeter. By its unique design, the user can adjust his position with one hand, even if the device is tensioned. The Stopfor B LCM06 operates with a polyamide 14 mm braided rope. The device is ergonomic and designed for easy, effort-free rapid adjustment. The unit can be opened to allow the user to perform maintenance on the product without disassembling the tensioner.
    Corrosion resistant fall arrest eyebolts made from aluminium also known as a restraint eye bolt or a fall arrest anchor point. Conforms to EN795
    Load Arrestors from 8m to 25m.

    Letcart 250 - 10m or 15m wire rope length. 20 metres a min max speed
    Letcart S - 500kg, 800kg, 1000kg SWL. 15m, 20m, 25m wire rope length. 18 metres a min arrest speed
    Letcart SI - 500kg, 800kg, 1000kg SWL. 15m, 25m wire rope length. 18 metres a min arrest speed.

    Fixed Single Lifting Beam.

    Lifting beam suitable for numerous applications.

    • Symmetrical or asymmetrical traction (max angle 15°).
    • Central ring lifting with 2 separate compensating beams.
    • WLL 1000 kg to 6000 kg.
    • Useful length 1000 mm to 5000 mm.
    Adjustable Lifting Beam with single central top lifting eye.

    Adjustable lifting beam.

    • Single beam spreader.
    • WLL from 1000 kg to 6000 kg.
    • Useful lengths of 1000 mm to 5000 mm.
    In order to minimise freight cost, you may order kits of components and have the beam manufactured locally.
    Multiple applications for turning of loads (load turner).

    The Pal-Turn system consists of a tube rotated by a gear driven motor. Pulleys, protected by castings, are mounted at both ends, which rotate the straps and in turn rotate the load. A control button box enables the exact position of the load to be easily achieved. Available in safe working loads ranging from 100kg to 20,000kg.

    Mobile suspension jibs that allow very fast access to building facades, Modular Galvanised The mobile portable suspension jibs allow very fast access to the building facades using many types of temporary platforms. A free standing mobile man riding anchorage / suspension jib that is also used by rope access technicians. Cantilever reach and safe working loads to our customers specification. Two additional height adjusters fixed on the mobile front and rear cross bars. An additional telescopic jib to reinforce the structure. Two crossbar extensions at the front to increase its stability.
    2 metre air-driven temporary suspension platform certified for use in explosion proof environments to ATEX II 3G EEx c IIB T3

    LiftingSafety uses cookies to improve your user experience,
    To accept this, please click the 'accept' button below.

    Top