Search Results for "3M"- 179 items found

Not the results you were looking for? Try broaden your search terms and avoid using plurals!
1
 

Ridgegear "RGL20" Kinetic Fall Arrest Lanyard (Elasticated) Choice of Karabiners, Scaffold Hook or Snap Hook - Length Options 1.3m or 1.8 Metre

Kinetic expanding fall arrest lanyards in lengths off 1,3m and 1.8 metre.

Ridgegear Kinetic Fall Arrest Lanyard in 1.3 or 1.8m, webbing material 26mm inner shock absorber webbing polyester 40mm 29kn outer webbing polyester.
These lanyards are compatible to any EN362 karabiners. The RGL20 only has these 2 components thus providing versatility, simplicity and negates the need for a separate bulky shock pack. The fall arrest force trace is a lot smoother than with conventional tear webbing, and the permanent elongation (displacement) is also less at approx 1.20 metres for a fail factor2. T

2
 

Ridgegear "RGL1" Webbing Fall Arrest Lanyard and Shock Absorber. Choice of Karabiner, Scaffold Hook or Snap Hook - Length Options 1.3m or 1.8 Metre

Ridgegear webbing lanyard and shock absorber supplied in lengths of 1.3m and 1.8 metre.

Ridgegear Webbing Lanyard and Shock Absorber is an industry standard, and normally the minimum equipment issued with a harness for working at height. The webbing used in the manufacture provides grater strength, wear and sheer resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product. Available in lengths of 1.3m and 1.8m.

3
 

Ridgegear 'Defender' Fall Arrest Inertia Reel, Cable length options 3.3m to 9m

Ridgegear Defender fall arrest block with galvanised wire lifeline. Available on 3.3m, 6m or 9m lengths.

4
 

Fork Truck Tine Protection Sleeves - 1.3m to 1.9m

Fork Protection Sleeves.

These are designed to slip over the truck forks to prevent marking or damage of the product. A range of heavy duty sleeves, with a 3mm spray coating of polyurethane. Only available in pairs.

5
 

Miller "Kit 9" Minilite Fall Arrest Kit with Single Point Duraflex Harness, 3.3m Inertia Reel, and Box.

Minilite Kit with 1 Point Duraflex Harness and Lightweight Fall Limiter. EN360 and EN361

Miller Minilite Kit comes with the following: Miller Duraflex Harness- 1 Point Rear D Ring Anchorage Model No. 1002847. Minilite 3.3m self-retracting fall limiter with scaffold hook Lightweight Fall Arrest Block Model No. 1002871 and Small Plastic Carry Case Model No. 1004602.

6
 
7
 

3m Protecta Harness Accessories

Accessories for Protecta Harnesses

8
 

Yale YBA Spring Balancer With Integrated Fall Arrestor - Adjustable Range from 9kg to 70kg, Cable lengths Up To 2.3m (14 options)

Yale tool spring balancers with an additional safety-device and anti wear feature protecting aluminium housing.

The Yale Spring Balancer with Integrated Fall Arrestor has a variety of different max loads and lifts :

Standard Length : 9kg-15kg(1.3m Lift), 15kg-22kg, 22kg-30kg, 30kg-40kg, 40kg-50kg, 50kg-60kg, 60kg-70kg(1.5m Lift).

Extended Length : 9kg-15kg, 15kg-22kg, 22kg-30kg, 30kg-40kg, 40kg-50kg, 50kg-60kg, 60kg-70kg(2.3m Lift).

9
 

Yale Festoon Power supply System - Standard Track lengths 3m - 30m (any length on request)

Festoon cable system contains all the parts required to install a power cable supply.

These Festoon cable systems have galvanised track and supports and system lengths from 3 to 30 metres.

10
 

Ridgegear "RGL2" Kernmantel Rope Fall Arrest Lanyard. Choice of Karabiners, Scaffold Hook or Snap Hook - Length Options 1.3m or 1.8 Metre

Kernmantle Synthetic Rope lanyard supplied in 2 lengths.

Ridgegear Kernmantel Lanyard  is of traditional type, using 12mm kernmantle rope with machine stitched connection eyes at each end. The lanyard is fitted with a standard shock absorber pack, even though the rope itself has some shock absorbing capacity. The rope used in the manufacture of this lanyard, shows some resistance to alkali's, oils and organic solvents. Available in lengths 1.3m and 1.8m.

11
 

Ridgegear "RGL3" Twin Leg Fall Arrest Lanyard, 100% Tie off. Choice of Karabiner, Scaffold Hook or Snap Hook - Length Options 1.3m or 1.8 Metre

Twin leg lanyard generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures.

Ridgegear RGL3 Twin Leg Fall Arrest Lanyard allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. It is also treated with a water repellent coating which should extend the life of this product. This lanyard can be fitted with any compatible EN362 karabiner. Available as either 1.3 or 1.8kg.

12
 

Ridgegear "RGL6" Elasticated Fall Arrest Lanyard. Choice of Karabiner, Scaffold Hook or Snap Hook - Length Options 1.3m or 1.8 Metre

Fall arrest lanyard for use when the operative is working from a static position connected to a fixed anchor point,

Ridgegear RGL6 Elasticated Fall Arrest Lanyard is a general purpose lanyard which can be use when the operative is working from a static position. The elastication in the lanyard reduces the amount of hanging slack in the lanyard, which can be helpful when working in tight spaces to help reduce trip hazards and entanglement. Available in Lengths of 1.3m and 1.8m.

13
 

Ridgegear "RGL9" Twin Leg Elasticated Webbing Fall Arrest Lanyard, 100% Tie Off. Choice of Karabiner, Scaffold Hook or Snap Hook - Length Options 1.3m or 1.8 Metre

Twin leg elasticated lanyard allows leg movement between anchorage points by means of double clipping.

Ridgegear RGL9 Twin Leg Elasticated Fall Arrest Lanyard allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. The elastication in the lanyard reduces the amount of hanging slack in the lanyard, which can be helpful when working in tight spaces to help reduce trip hazards and entanglement. Available with No End Fittings in both 1.3 and 1.8m, also available with 2 x 60mm double action scaffold snap karabiner - aluminium and 11mm Screw-gate delta link - steel. Available on both 1.3 and 1.8m.

14
 

Miller "MD07" Short Restraint Polyamide Rope Lanyard with Galvanised Connector, 0.3m Length

Miller 12mm Polyamide Rope Lanyard for use with MicroLoc Rope Grab, Complies to EN354.

Short Connection Fall Arrest and Restraint Lanyards are lightweight, versatile restraint and fall arrest lanyards designed for maximum protection where limited movement is acceptable and where there is a sufficient potential fall distance. This is fitted with a galvanised steel connector (CS20), with an 18mm opening, for use with the MicroLoc rope grab. Accredited to EN354.

15
 

Miller "MD50" Short Restraint Single Connection Webbing Lanyard, 0.3m Length

Miller 23mm Yellow Webbing Lanyard Designed to connect/disconnect to Anchorage Point without Assistance, Complies to EN354.

Lightweight, versatile restraint and fall arrest lanyards are designed for maximum protection. They are adapted for work that requires limited movement and where there is a sufficient potential fall distance. The Miller MD50 is a webbing extension for use on a harness' rear anchorage, which in turn allows the user to connect or disconnect to a fall arrest system without the need for any assistance.

17
 

LiftingSafety Fall Arrest Inertia Reel Personal Fall Limiter (PFL) - From 3m to 24m

Personal fall arrest inertia reel block with plastic or aluminium housing, wire rope lifeline and optional terminations.

18
 

Ridgegear 'Defender' Fall Arrest Inertia Reel, Webbing Length 3.3m

Ridgegear Defender fall arrest block with UHMWPE web lifeline and snaphook lower connector.

19
 
20
 

3M DBI Sala Davit Mast Extensions High Capacity Options: 530 to 1440mm

Compatibility with other Sala Davit High Capacity components

21
 
22
 

3M DBI Sala Universal Lower Mast & Offset Arms High Capacity

Compatibility with other Sala Davit High Capacity components

23
 

3M DBI Sala Sockets to Suit High Capacity Advanced Davits

Compatibility with other Sala Davit High Capacity components. Older style davits can interface with these sleeves by utilising an intermediate adapter

24
 

3M DBI Sala Base / Socket Adaptors

Allows the New Sala High Capacity to be used with the 'Old' 3" Design

25
 

3M DBI Sala Winch Mounting Bracket for Davit Arm High Capacity

Compatibility with Sala Davit High Capacity components

26
 

3M DBI Sala Vehicle Hitch Mount Base High Capacity

Compatibility with other Sala Davit High Capacity components

27
 

3M DBI Sala 5 Piece Short Reach Davit High Capacity

Sala advanced free-standing man-riding, fall arrest and rescue davit system for confined space access.

28
 

3M DBI Sala 5 Piece Long Reach Davit High Capacity

Sala advanced free-standing man-riding, fall arrest and rescue davit system for confined space access.

29
 

ForkLift Truck Tine Mounted Manually Adjusted Telescopic "Extender" Jib Attachment - Range From 210kg to 2700kg

2m to 3m Telescopic Extender Jib with secondary removable hook.

This fork mounted extender jib has all the features of the standard fork mounted jib but has the added functionality of a telescopic inner beam that allows for longer loads to be handled. The increased reach also allows loads to be lifted from otherwise inaccessible locations. This Jib is provided with two swivel hooks and shackles thus allowing long loads to be slung at greater centres presenting superior stability of the load.

30
 

Miller "MC" Adjustable Pole Strap. Work Positioning Lanyard. Alloy Jaw Adjuster and Snaphook. "Adjustable Restraint Lanyard" - 2, 3 or 4 metre

Miller Quality 2m, 3m & 4m Adjustable Lanyard for Work Positioning and Restraint. Jaw Type Adjuster. MC01, MC02 and MC03Complies to EN358.

Adjustable Fall Restraint and Work Positioning Lanyard for those who have to work at height in a safe and supported hands-free position. the lanyard is fitted to a supporting structure and then connected to the side D-rings on the operator's belt or harness. Available in sizes 2, 3 and 4m.

31
 

Miller "Minilite" Inertia Reel Personal Fall Limiter (PFL) with Polyester Webbing Lanyard (Many Karabiner Options) - 3.3 metre

3m Webbing retractable "self retracting lifeline" (SRL) Inertia Reel. Complies to EN360.

Features include a Visual load indicator, an Energy dissipating element, High resistance thermoplastic housing, a Scaffold hook with swivel, high-impact composite housing and a corrosion resistant interior.

Miller Minilite Webbing Fall Limiter can come with a variety of End Fittings - Karabiner & Swivel Snaphook, Scaffold Hook & Snaphook, and Karabiner & Snap Hook.

32
 

Lightweight Aluminium Tripod Crane - 1000kg SWL

Aluminium lifting tripod at 3.3m when erected, 2m when collapsed. Optional hand chain hoist.

Heavy Duty Aluminium Tripod designed for portability and great value for money, fully adjustable telescopic legs ideally used with a hand chain block or electric chain hoist. Tripod Features; Greater adjusting range due to telescopic legs than standard lifting tripods and fully Collapsible reducing the overall length to 2000mm for easy storage and transportation. The tripod feet are fitted with non-slip rubber-metal linings, guaranteeing stability.

33
 

Lightweight and Adjustable Aluminium Tripod with Hand Winch and Pulley Sheave - 1000kg SWL

Aluminium lifting tripod with hand winch at 3.3m when erected, 2m when collapsed.

Heavy Duty alloy Tripod, excellent quality, made in Germany; a portable piece of lifting equipment supplied with a 25 metre height of lift hand winch. The cable is deflected over a pulley wheel. The tripod has fully adjustable telescopic legs that collapse to a length to 2 metre for easy storage and transportation. The tripod feet are fitted with non-slip rubber-metal linings, guaranteeing stability.
34
 

Ridgegear "RGAX3W" Xcalibre Fall Arrest Inertia Reel Personal Fall Limiter (PFL) Polyester Webbing Lanyard (Many Karabiner Options) - 3 Metre

Super light retractable "self retracting lifeline" (SRL) 3m fall arrest block. Complies to EN360

Xcalibre 3m Fall Arrest Block is the answer in safety when working at low levels due to its unique rapid breaking system (RBS). Packed with unrivalled technology, super light and finished with a sleek, compact and contemporary design, there is an Xcalibre block that will meet and exceed your expectations. Materials: composite mouldings UV stabilised, carbon steel black zinc plated, anodised aluminium, stainless steel Web spec: 3m polyester webbing Connectors: Supplied with allow swivel load indicator twist lock, Karabiner on life-line and 11mm alloy twist lock device. Capacity / weights: 3m webbing/ 1.1kg (including swivel hook), Dimensions 150mm x 80mm x 80mm excluding karabiners Arrest force / distance: Webbing 4.0kN / <300mm.
35
 

Yale Tripod, Portable & Lightweight Aluminium For Man-riding, Fall Arrest and Rescue Applications

Aluminium Tripod, Extendable from 1.34m up to 2.3m with optional Man Riding Winch or Fall Arrest Inertia Reel Block

Aluminium construction for ease of lifting, Adjustable from 1340mm fully retracted to 2300mm fully extended, Telescopic legs,  Supplied with security chain around the base, Stabilising feet with rubber grip. Yale is a top quality lifting and height safety equipment manufacturer, we are proud to offer to our customers the Yale Rescue tripod system for fall arrest and man riding applications. The tripod is made from light weight aluminium, it is height adjustable, the legs are telescopic and the whole tripod folds for storage and / or transportation. We offer the tripod certified to EN794 with a maximum capacity of 500kg though LiftingSafety also offer as a complete height safety set with man-riding winch (20 or 25m) or / and with a fall arrest inertia reel.
36
 

Protecta "Rebel" Inertia Reel Personal Fall Limiter (PFL) with Webbing and Shock Pack - 3.3 Metre

Rebel Self Retracting Life Line with 3.3m x 25mm Wide Webbing, with Optional Fittings

37
 

Yale Lift ITP Push Travel Hand Chain Hoist - Range from 500kg to 5000kg

Low Headroom Combination Chain Hoists with 360 degree Handwheel and Push Trolley.

The Yale 360 Yalelift ITP is a 360° hoist, solid mounted on to a Yale push travel trolley with a 3 metre lift height supplied as standard and corrosion resistant trolleys are available.

Capacities available: 500kg, 1 tonne, 2 tonnes, 3 tonnes and 5 tonnes.

38
 

Yale CPV Electric Chain Hoist, 400v 3Ph 50Hz - Range from 250kg to 5000kg

Electric Hoist - 3 Phase with optional geared, push or electric powered (motorised) trolley or hook/lug suspended.

Features include load sprocket and chain guide that can be easily inspected or removed without disassembly of the complete unit; it is designed to FEM 1Am. and have main line contactor for increased safety. As standard Yale offer a 2 year warranty (excluding wear parts) and a lifetime lubricated gearbox. Thermal overload protection is a standard feature on the whole range. Optimised housing for improved cooling. The Duty cycle 50% ED for single speed. Electromagnetic spring pressure brake holds the load safely even in the event of power failure.

39
 

Yale CM Lodestar Electric Chain Hoist, 1Ph or 3Ph - Range from 250kg to 3000kg

Lodestar (Loadstar) Electric Chain Hoist Single Phase 110v and 230v or Three Phase 400v. Hook suspended or with trolley (manual, geared or electric (powered/motorised)).

CMLS Single or Three Phase Hoist is a top quality electric chain hoist renowned the world over. The Lodestar is a tough, durable electric chain hoist, designed to keep working in the most arduous conditions. Features include 50% duty rating (30 minutes continuous use per hour). Overload protection and heights of lift up to 60 metres are available.

Capacity available: 250kg, 500kg, 1000kg, 2000kg and 3000kg with hook suspension or with manual trolley or electric power travel trolley.

40
 

Imer Internal Adjustable and External Props (For use only with Imer scaffold hoists)

Internal Adjustable and External Scaffold Hoist Props.

  • 200kg capacity.
  • The Internal Adjustable Prop adjusts from 2.45m to 3.3m.
  • The External Prop consists of an Internal Prop and a conversion kit with ballast.
  • The prop has limited dimensions and can be dismantled for storage and transportation.
  • The External Prop allows the hoist to be mounted outdoors where overhanging support points are not available.
41
 

Verlinde Eurochain VL INOX Electric Hook Suspended Hoist - Range from 60kg to 1250kg

Hook Suspended Electric Chain Hoist with Stainless Steel Load Chain Hoist.

This hook suspended hoist with height of lift 3m as standard, 2 hoisting speeds with upper and lower electric limit switch, torque limiter and chain collector.

Various options available: hook suspended, push travel trolley and electric travel trolley.

42
 

Verlinde EUROCHAIN VL DIGICHAIN 3 Phase Electric Chain Hoist with Positioner Hook - Range from 60kg - 500kg

Electric Chain Hoist with Positioner Hook.

The electric chain hoist EUROCHAIN VL DIGICHAIN includes same equipment as standard model except: maximum height of lift 3m, hand tight positioner on push button type DIGICHAIN with 3m control cable, upper and lower electric limit switches, moveable lifting hook, low voltage control 48V on hand tight positioner with push button

Options on positioner hook hoist: Safe working load, hoist speed, suspension type.

Available in sizes 60kg, 125kg, 250kg and 500kg.

43
 

Verlinde Eurochain VL 1Ph Single Phase Electric Chain Hoist - Range from 80kg to 1000kg

Electric Chain Hoist.

This is a single phase electric chain hoist with a hoisting speed of 2m/min - 4m/min, Power supply 230V / 1Ph / 50HzDirect voltage control. Electric limit switch is not available on this version. Available with push travel trolley, geared travel trolley or hook suspended, 3m HOL (Height of lift as standard).

Available in sizes 80kg, 125kg, 250kg, 500kg and 1000kg.

44
 

LiftingSafety 2 Point Bespoke Lifting Beams. "Length Adjustable" Load Suspension Distance. Capacities and Sizes To Customers Specification

2 Point Centre Suspension Adjustable Lifting Beam.

This selection of lifting beams are made from steel and finished to our customers' requirements. All the lifting beams are designed according to each and every individual customer request / specification and are advertised for illustration purposes only. We will ensure that drawings for approval will be issued with receipt of your order.
Lifting and spreader beams are individually designed to customers requirement and for a wide variety of applications including customer specified safe working load and dimensions, painted or galvanised for marine and offshore use with adjustable centre of gravity and with anti-sparking (spark resistant) features. All lifting beams are supplied CE certified.

45
 

4 Point Lifting Beam, Capacities and Sizes To Your Specification - Range from 1000kg to 10,000kg

4 Point Fixed Suspension Points Type Lifting Beam.

Our 4 point 'H' style lifting beams are made in the UK from steel and painted for indoor or out door use to our customers' specification. All our 'H' shape Lifting beams are made to order and therefore the design and lifting capacity can be modified to suit your individual requirements. (Safe Working Load, Span, paint type of hook size of eye etc..)
46
 

Adjustable 4 Point Lifting Beam, SWL and Dimension To Your Spec - Range from 1000kg to 10,000kg

4 Point Adjustable Suspension Point Lifting Beam.

This selection of 4 point lifting beams are individually made from steel to our customers specification and are adjustable in both directions (width and length) The customer will generally specify the paint spec,  size (dimensions) and SWL. All the lifting beams listed for sale are examples only of what typically is available (illustration purposes)
47
 

JDN "Mini" hook Suspended Pneumatic Chain Hoist - Range from 125kg to 1,000kg

JDN Mini Pneumatic Chain Hoist, Manual Trolley Options Available

The JDN mini-series is aimed at applications where small and lightweight is important, not heavy duty, but robust for industrial use making it an ideal tool for maintenance engineers. Suitable for lube-free operation and for application in hazardous areas. Easily maintained with a wear resistant braking system and is light weight for easy handling. It is also suitable for horizontal pulling.

Available in 125kg, 250kg, 500kg and 1000kg.

48
 

JDN "Profi TI" Heavy Duty Hook Suspended Pneumatic Chain Hoist - Range from 250kg to 100,000kg

Heavy Duty Pneumatic Chain Hoist.

JDN Air Hoists PROFI Series are very robust and they are suitable for tough industrial and offshore applications. For traversing loads there are different trolleys that can be supplied; standard Features include being suitable for applications in hazardous areas (ATEX, Zone 2 etc) and have sensitive, infinitely variable, speed control for the precise positioning of loads.

49
 

Verlinde VL Stepless Variable Lifting Speed Stepless Chain Hoist - Range from 500kg to 7500kg

Stepless Chain Hoist.

The variable lifting speed stepless chain hoist is available with hook suspension, push travel trolley, geared travel or electric travel trolley.

Power supply 380 to 480V / 3PH / 50Hz 60Hz and low voltage control 48V (115 or 230 as option). Variable travelling speed on electric trolley (except 3 falls hoist). Motor thermal protection, Electric limit switch, Torque limiter

Available in sizes ranging from 500kg to 7500kg on request.

50
 

Portable Jib Crane, 'H' section lifting Beam - Range from 125kg to 500kg

Mobile Swing Jib Crane with Underbraced, suitable for low headroom application.

The under braced design on this portable swing jib crane is a lower overall height than the over-braced cranes and this means that it is particularly suitable for lifting applications with restricted headroom. Available in 125kg, 250kg and 500kg with different lengths of span.

51
 

Donati GBP C OB 'C' Profile Wall Fixed Overbraced jib Crane - Range from 63kg to 1000kg

270° Manual Slew 'C' Profile 'Channel profile' Wall Mounted Jib Crane with Overbraced Arm.

These manually rotated jib cranes are available for lifting capacities from 63kg to 1000kg and jibs from 2m to 7m. The Donati jib cranes are designed and manufactured according to the ISO A5 classification. The possible configurations are:  GBP, wall mounted jib crane characterized by a jib rotating angle of 250 degrees. Dimensional Drawing. The crane jib can be supplied in three different solution: "C" channel version for lifting capacities from 63kg to 1000kg and outreach from 2m to 7m.

 

52
 

Donati GBA C3/4 'C' Profile Overbraced Jib Crane - upto 1000kg SWL

300° Manual Slew C-Profile Channel profile Free Standing Swing Jib Crane with Overbraced Arm.

“C” Channel version: For lifting capacities from 63kg to 1000kg; Jibs from 2m to 7m; Manually rotated; 300° Slew; The arm is made using a special section bar made of folded sheet metal, inside which the hoist-carrying trolley runs. The arm is fitted with one or two staybolts which support the profile and connect it to the rotation tube. This version is characterised by the extreme ease of handling due to the low inertia derived from its own reduced weight. The arm is normally fitted with a special “channel” profile trolley, which allows it to be pushed with maximum fluidity. Our jib cranes are designed and manufactured according to the ISO A5 classification.
53
 

Donati GBP UB 'I' Profile Wall Mounted Under Braced Jib Crane - Range from 63kg to 2000kg

250° Manual Slew 'I' Beam Wall Mounted Swing Jib Cranes with Underbraced Arm.

The manually rotated jib cranes are available for lifting capacities from 125 kg to 2000 kg and jibs from 2m to 8m. The Donati jib cranes are designed and manufactured according to the ISO A5 classification. The possible configurations are: GBP, wall mounted jib crane characterized by a jib rotating angle of 270 degree. The crane jib can be supplied in three different solutions: , "T" cantilever version, for lifting capacities from 63kg to 2000kg, and outreach from 2m to 5m.
54
 

Donati 'I' Profile Under Braced Jib Crane - upto 2000kg SWL

290° Manual Slew 'I' Profile Free Standing Swing Jib Crane with Underbraced Arm.

The manually rotated jib cranes are available for lifting capacities from 125 kg to 2000 kg and jibs from 2m to 8m. The Donati jib cranes are designed and manufactured according to the ISO A5 classification. The possible configuration are: - GBA, floor mounted jib crane with square column characterized by a jib rotating angle of 300. The crane jib can be supplied in three different solution: - "T" cantilever version, for lifting capacities from 63kg to 2000kg and outreach from 2m to 5m. The arm is made using a laminated I-beam form: the hoist-carrying trolley run on the lower flange of the I-beam. The girder is self-supporting and cantilevered, so it has no support tie rods and it is directly integral with, via suitable reinforcement, the rotation tube. This version allows the optimum use of the available space at a height due to the absence of tie rods and allows the maximum use of the hook path.

55
 

Donati MBE 'I' Profile Power Slew Under Braced Jib Crane - Range from 250kg to 2000kg

Underbraced Arm, 290° Power Slew 'I Beam' (H Section) Wall Mounted Swing Jib Crane.

Donati MBE 'I' Profile Power Slew Under Braced Jib Crane are available in the following sizes - 0.5t, 1t, 2t. Arm lengths available - 2m, 3m, 4m, 5m, 6m.
56
 

Donati CBE UB 'I' profile Under Braced Power Slew Jib - upto 2000kg SWL

290° Power Slew 'I' Profile Free Standing Swing Jib Crane with Underbraced Arm.

Options on Power Slewing Arm >2000kg

Lifting Capacity, Arm Length, Fixing Options, Paint Finish, Colour, Height under Beam, Mechanical Rotation Stops, Mains Isolator Switch (IP55), Hoist Required, Installation Required

57
 

Yale VLHP Low Headroom Trolley - Range from 250kg to 6000kg

Yale Low Head Room Swivel Truck Push/Geared Trolley with Extremely Short Radius Curve.

The manual trolley series VLH features extremely low headroom. The swivel truck construction allows negotiation of very short radius curves. All-steel construction with low headroom. The swivel truck feature permits application on runways with very short radius curves. All units are variably adjustable to individual beam sizes. Anti-drop devices and anti-tilt devices are standard features. All geared (VLHG) units come complete with 2.4 metre HCD (hand chain drop) as standard to suit 3m HOL (height of lift).

 

58
 

Yale CPS Lightweight Electric Chain Hoist, 1Ph / 3Ph - 125kg or 250kg

CM Shopstar / Yale Electric Chain Hoist, Top Hook Suspension, Lightweight, 110v, 230v or 400v - 1Ph or 3Ph.

A small and light weight (only 12kg when 3m HOL) Industrial quality electric chain hoist. Electrical protection to IP54 as standard with low voltage pendant control and overload protection. Smooth operation. Thermally protected hoist duty motor with dual braking system and rugged cast aluminium alloy hoist frame, 5:1 factor of safety yet small, compact design for industrial applications. Hardened forged steel latch-style lower hook rotates 360°.

59
 

Yale "Yalelift 360 SR" ATEX Hand Chain Hoist, Hook Suspended - Range from 500kg to 20,000kg

Spark Resistant Hand Chain Hoist with single or 2 fall chain.

Spark Protection Features : Stainless steel load and hand chain, units completely corrosion resistant, bronze plated suspension and load hooks, solid bronze trolley wheels, rubber buffers and chain containers for increased spark resistance. Anti-tilt and anti-drop devices are standard. Ideal for applications with low ceiling and limited headroom.

All units of this series up to a capacity of 3000kg are provided with a single chain fall and the minimum headroom has been further reduced.

60
 

Yale Yalelift 360 ITP SR ATEX Hand Chain Hoist with Monorail Push Travel Trolley - Range from 500kg to 2000kg

Spark Resistant Chain Hoist with Integral Push Trolley.

This product is the same as Yalelift 360 SR, but on a Push Trolley. It is provided with the following for extra spark protection: stainless steel hand chain, units completely corrosion resistant, bronze plated suspension and load hooks, solid bronze trolley wheels rubber buffers chain containers.

61
 

Yale "Yalelift 360 ITG SR" ATEX Hand Chain Hoist with Monorail Geared Travel Trolley - Range from 500kg to 10,000kg

Spark Resistant Chain Hoist With Integral Geared Trolley.

This product is the YaleLift 360 Atex hand chain hoist with chain driven trolley provided with the following for extra spark Protection; stainless steel hand chain and zinc plated load chain. The hoists are completely corrosion resistant with bronze-plated suspension and load hooks and solid bronze trolley wheels. Yale has also fitted Rubber Buffers and the addition of a chain container. Please note that it is the responsibility of the user to identify the explosion proof classification required, NOT the hoist manufacturer or the supplier.
62
 

Kito ERD Electric Hoist - Twin Speed - Range from 125kg to 5000kg

Dual Lift Speed Electric Chain Hoist.

Options on Kito Electric Hoist: Model, additional height of lift per metre (3mtr as Std), upper/lower limit switch, emergency stop, counter/hour meter, thermal protector.

Available in sizes 125kg, 250kg, 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg and 5000kg.

63
 

Kito ERM-SS Motorised Trolley Hoist with Single Lift and Travel Speed - Range from 125kg to 5000kg

Single Travel Speed Motorised Trolley with Single Lift Speed Electric Hoist.

Motorised Trolley Features: Minimum curve radius, simple gear box construction and improved balance.

Available in sizes 125kg, 250kg, 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg, 5000kg.

64
 

KITO ERM-DD Motorised Trolley Hoist with 2 Speed Lift and Travel - Range from 125kg to 5000kg

Dual Travel Speed Motorised Trolley with Dual Lift Speed Electric Hoist.

Options on Motorised Trolley Hoist: Model, Additional Height of Lift per Metre (3mtr as Std). Available in sizes 125kg, 250kg, 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg, and 5000kg.

65
 

KITO ER-SD Trolley Hoist with Single Speed Travel and Dual Lift - Range from 125kg to 5000kg

Single Travel Speed Motorised Trolley with Dual Lift Speed Electric Hoist.

Options on Motorised Trolley Hoist: Model, SWL, Additional Height of Lift per Metre (3mtr as Std).

Available in sizes 125kg, 250kg, 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg and 5000kg.

66
 

Kito ER Electric Hoist - Single Speed - Range from 250kg to 5000kg

Kito ER Single Lift Speed Electric Chain Hoist.

Options on Kito Electric Hoist: Model, Additional Height of Lift per Metre (3mtr as Std).

Available in sizes 250kg, 500kg, 1000kg, 2000kg, 3000kg and 5000kg.

67
 
68
 

Kito TWER2 Twin Hook Hoist or Motorised Trolley- Range from 250kg to 5000 kg

Twin Hook Electric Hoist with Hook Suspension or Motorised Combined Trolley.

69
 

Portable Swing Jib Crane with 'C' profile lifting Beam - Range from 125kg to 500kg

Portable Swing Jib Crane with built-in counterbalance weight.

All the same features as the above crane with 'H' beam version though supplied with a light weight 'C' profile track (lifting beam). All these portable swing jib cranes offer a slight variation on the same theme - portability! Having the convenience of a swing jib with the unique ability to be able to move its location with the use of a fork truck or overhead crane. Available in 125kg, 250kg and 500kg each can come with different spans.

70
 

'H' Section Portable Swing Jib Crane Overbraced Design - Range from 125kg to 500kg

Portable Swing Jib Crane with Overbraced arm with integrated counterbalanced weight.

The H-section transportable jib cranes are available as 125kg, 250kg or 500kg SWL, the standard height is 3m under the beam but can be supplied up to 4 metres maximum. Jib features include: delivered with counterweight and 4 adjustable jacks, polyurethane painting RAL. 1028 on a shot-blast structure, paint guaranteed for 24 months according to Re3. Frame structure: FEM 2m.          
71
 

Vetter Portable Pillar Jib Crane with Max Reach 5000mm - Range from 125kg to 500kg

Mobile Pillar Jib Crane with optional hand transport trolley.

Advantages of this mobile jib crane are that it is ready for use right away wherever it is needed and can be transported by bridge crane, fork lift truck or trolley. This portable jib crane is ideal for use in rented buildings as no damage is caused to the floor as there would be when installing a conventional jib crane. Extremely stable, the cranes are designed for easy operation. Suspension points can be installed for lifting with a crane or fork lift truck. Available in 125kg, 250kg, 315kg, 400kg and 500kg.

72
 

Economy Automatic Guided Fall Arrester Rope Grab - Ranging from 10 - 30m

Automatic rope grab with 12mm rope.

Economy Automatic Guided Fall Arrester Rope Grab and anchorage line is designed to prevent workers from falling during ascent or descent. It is particularly useful on sloping roofs where retractable lifelines may react too slowly. The automatic rope grab locks onto the rope in the event of a fall, arresting a fall within centimetres thus reducing the fall arrest forces and facilitating rescue. Available in sizes 10, 15, 20 and 30m.

73
 

Miller Titan Economy "Roofers Restraint" Height Safety Kit with 2 Point Harness and 10m Automatic Rope Grab.

Titan Economy Roofers Kit. Complies to EN361, EN353-2

Miller Titan Economy Roofers Restraint Height Safety Kit Contains : Economy Harness, 2 Point Rear D Ring and front webbing loops. Harness Model No. 1011891 and Automatic Rope Grab on Lifeline Automatic Rope Grab, 10m rope Lifeline, 0.3m Lanyard Model No. 1011190

74
 

Miller "MF52" Automatic and Manual Operation. Guided Fall Arrester. Rope Grab Options to Suit 10-12mm and 14-16mm Synthetic Rope.

Miller Quality Automatic Rope Grab with Manual Mode For Restraint. For Vertical & Horizontal Use to EN353-2.

Miller MF52 Auto/Man Rope Grab is suitable for vertical, horizontal and sloping rope grab where the user locks the grab on the rope for restraint purposes, and repositions it manually along rope. Available for 10-12mm or 14-16mm. MF52 supplied complete with 0.3m lanyard and connector.

75
 

Miller MN50 Potex Portable Man-Riding and Rescue Davit Arm System, Galvanised Modular Construction

Potex Portable Davit Arm complete with 30 metre Winch. Many Different Base / socket Options.

Height : Fully extended: Maximum outer height 2.25m Height below carabiner: 2.1m. Fully retracted: Minimum outer height: 2.05m Height below carabiner: 1.9m. Length :Fully extended: 1.3m Fully retracted: 1.3metre Width: Fully extended Maximum outer width 1.3m. Width between feet 1.11m. Fully retracted: Minimum outer width: 1m Width between feet: 0.81m. Body : Aluminium Screwjack : Galvanised steel Winch : Galvanised steel sheet Wire : 30 meters - Ø4.8mm galvanised steel Reach of lifting wire : 395mm
76
 

MiIler Galvanised Steel Anchorage Sling with Thimble Eye Terminations and Clear Plastic Protective Sleeve - 1, 2 or 3 Metre

Galvanised Steel Anchorage Sling. 1, 2 or 3 metre Lengths. To EN795

Miller Galvanised Steel Anchorage Sling is 6.3mm galvanised steel with protective plastic sheath, this is easy to install. Large opening is ideal for anchorage to girders and beams. Available in 1, 2 and 3m.

77
 

Sure-Grip Walkway

Sure-Grip Walkway and Collective Protection System.

Sure-Grip Walkway creates a safe means of access to all roof works with the anti-slip tread and a delineated route, creating a levelled route and providing a safe access. The walkway is available in 4 different models to suit different roof types - standard panel to suit metal profile roof sheet, standard panel to suit flat membrane, asphalt or lead roof. Valley applications. Fall Protection covers. Available for the following flat roofs; lead, felt, single ply membrane tiled surfaces, slate, clay fragile surfaces stepped applications profile cladding; fibre cement, steel, aluminium valley gutters and roof lights.
78
 

Demarcation Barrier System for Marking Out a Safe Working Zone

Demarcation Barrier supplied with bases, uprights and chain to suit your required system length

The Sure-Grip Demarcation Barrier System guides a user across a roof top avoiding fall hazards. The Sure-grip demarcation barrier system should be installed a minimum of 2m from a fall hazard. The system should not be used to guard a fall hazard but to direct people away from one. The system is a non-penetrative, maintenance free, easy to install system designed to create a safe working/ walkway zone across a roof top.

79
 

Verlinde Eurochain VL 3 Phase Standard Electric Chain Hoist - Range from 60kg to 10,000kg

Electric Chain Hoist.

The 3 phase standard electric chain hoist, height of lift 3m as standard. The Eurochain VL has 2 hoisting speeds and upper and lower electric limit switch. Paint 5 years guaranteed.

Comes in various ranges: Fixed hook suspension, push travel trolley, geared travel trolley and variable speed electric travel.

80
 

Miller "Reglex" Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster and Snaphook. "Adjustable Restraint Lanyard" - 2, 3 or 4 m

Miller Reglex Positioning Lanyard, in Several Length Options, with Optional Protector Sleeve. Complies to EN358.

Miller Reglex Adjustable Positioning Lanyard Complies to EN358. Available in several length options - 2, 3 and 4m. Optional protector sleeve also available.

81
 

Miller "Reglex 3000" Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster and Snaphook. "Adjustable Restraint Lanyard" - 2, 3 or 4 m

Miller Positioning Lanyard in Several Length Options with Optional Protector Sleeve. Complies to EN358.

Miller Reglex 3000 Adjustable Work Positioning Lanyard Complies to EN358. Available in several lengths 2, 3 and 4m with the option of a protector sleeve.

82
 

Round Polyester Lifting Slings (endless lifting slings). Conforms to BS EN 1492-2 - Range from 1000kg to 100,000kg.

Top Quality UK Manufactured Polyester Round Lifting Slings (Fibre Endless Slings).

83
 

LiftingSafety 110v or 240v DC Wire Rope Lifting Hoist - Range from 120kg, 300kg or 500kg Options. (Lifting capacities)

Wire rope hoist Certified for lifting applications up to 12 metre cable lengths.

Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase. Wire ropes are not included in warranty.

Features:     12 volt reversible permanent magnet motor;    Low amp. draw and low sound level;    25% ED duty cycle and maximum starting frequency of 150 times/h at 63% load;     Suitable for a wide range of lifting applications;     Ratchet brake;     Hand held remote with a 4.4m cord.
  

84
 

Soll "MultiRail" Permanent Installation Horizontal Fall Arrest System Designed and Installed By Our Professional Engineers to Customers Specification

Soll stainless steel and aluminium horizontal multi rail fall arrest system - Permanently Installed.

Compared to anchorage points which only offer the user a limited freedom of activity dependent on the length of the lanyard, MultiRail rail systems can be installed along the entire work area and allow continuous connection and greater protection. Compared to cable systems and anchorage points, horizontal guide rails offer the advantage that they can be also installed as handrails. In case of a fall, the forces are absorbed by several intermediate brackets and not just by both of the end-fixings, as is the case with cable systems, or by a single point, as it is the case with anchorage points. The rail can absorb retention forces of up to 100 kg (220 lbs.) without permanent deformation. The rail is not fixed in the intermediate brackets, enabling thermal expansions to be accommodated.
85
 

JDN "Mini Manipulator" Pneumatic Chain Hoist - 125kg or 250kg

Pneumatic Chain Hoist. Manual Trolley Option Available.

JDN Mini Manipulator comes with capacities of 125kg or 250kg SWL. The JDN Mini Manipulator loads can be lifted, lowered, manually traversed with only one hand. At the same time lifting and lowering speeds can be sensitively regulated by push button control. Due to light weight the mini-manipulator is easy to handle.
Standard Features include precise positioning and variable lifting/lowering speeds by sensitive direct control.
86
 

Yale ITP CR/SS Anti Corrosion Push Travel Hand Chain Hoist - Range from 500kg to 4000kg

Corrosion resistant hand chain hoist with stainless steel chains and integrated push trolley.

These hoists are all from the YaleLift 360 Models. The hoists/trolleys are fully corrosion resistant including the bottom hooks and are all fitted with stainless steel load and hand chain.

Available in with capacities of 500kg, 900kg, 1250kg, 2000kg and 4000kg.

87
 

Yale ITG CR/SS Anti Corrosion Geared Hand Hoist - Range from 500kg to 4000kg

Corrosion resistant hand chain hoist with stainless steel chains and integrated geared trolley.

These hoists are all from the YaleLift 360 Models. The hoists/trolleys are fully corrosion resistant including the bottom hooks and are all fitted with stainless steel load and hand chain.

Available in capacities of 500kg, 900kg, 1250kg, 2000kg and 4000kg.

88
 

Yalelift 360 CR/SS Ultimate Anti Corrosion Hook Suspended Hand Chain Hoist - Range from 500kg to 4000kg

Ultimate corrosion resistant hand chain hoist with stainless steel chains, hook suspended.

These hoists are all based on the YaleLift 360 Models. The hoists and trolleys are fully corrosion resistant, including the lifting hook and all units are fitted with stainless steel chains.

Available in capacities of 500kg, 900kg, 1250kg, 2000kg and 4000kg.

89
 

SALA "R350" Manriding & Rescue Hoist. SWL 250kg (2 Persons) Lifting Ratios 1:1 - 5:1. Synthetic Rope Lengths (HOL) to 66 Metre

SALA R350 Manriding and Rescue Winch with optional mechanical advantage to suit customers application.

Rollgliss R350 Rescue System designed to be a component of a rescue or personnel riding system. This equipment is used for applications where personnel need to be raised or lowered over a vertical distance. The maximum working load for this equipment is 150kg for one (1) person and 250kg for two (2) persons. The system is available with a 1:1 up to a 5:1 lifting ratio.
90
 

Pfaff DSRB Sheave Block for Wire Rope Guidance - Range from 700kg to 8000kg

Machined steel with sealed ball bearing sheave blocks for BETA PROLINE and SILVERLINE electric rope winches.

The dynamic all-rounder with variable rope and sheave diameters and cable deflections of up to 180° can move loads of up to 8 t with ease and absolute reliability. Typical for Pfaff-silberblau is the high standard of quality: With a sheave block for manual and powered operation, equipped with grease-filled, sealed ball-bearings as standard.

91
 

Pfaff DSRS Sheaves - Range from 800kg to 3800kg

Pfaff wire rope pulleys with sheave diameters from 145mm to 490mm and rope diameters from 5mm to 18mm.

The sheaves DSR made of steel provides a safe concept due to a wear-resistant rope guide where the machine groove is perfectly adjusted to the wire rope. There are 15 different types guarantees that are at a made-to-specification solution at loads of up to 8 tons. The sheaves can be varied in wire and sheave diameter (from 80 up to 490 mm) and as standard all sheaves are equipped with ball bearings.

92
 

Donati "DRH" Overhead Crane Hoist, Monorail, Low Headroom and Double Girder Options- Range from 0.8 to 40 tonne

Overhead electric wire rope hoists.

The Donati DRH series of electric wire rope hoists are available with a wide variety of options, such as height of lift (hook path) from 4 to 58 metres and 1, 2 or 3 lifting speeds. Also mounting and trolley options can add versatility to the DRH series, some of the trolley options are; fixed mounted, suspended, single beam or twin beam low headroom trolley mounted.

Donati offers a 3-year guarantee on the DRH series of wire rope hoist, starting from the date of delivery, all at a reasonable price.

 

93
 

Sala "Exofit Nex" Fall Arrest Harness with Rear and Front 'D' Rings. Optional Work Positioning Belt

Exofit Nex 2 point comfort and safety harness with optional work positioning belt, vertical torso adjusters, carrying pocket, and quick connect buckles to EN361 (& EN358 when with positioning belt).

Exofit Nex Harness is the next generation of full body harness, featuring added comfort, functionality and durability. With critical adjustment features that enable a perfect fit. Integrated Suspension Relief Straps sewn into the harness, Duo-Lok™ quick-connect buckles, and a covered pocket with elastic sides to store personal items – permit wearers to work smart, fast and safe. Available in sizes S, M, L and XL.

94
 

Tractel "Tirak" Wire Rope Lifting Hoists. 230v and 400v Options - Range from 300kg to 3000kg (non man-riding version)

Tractel Tirak electric hoist for material lifting applications, multiple configurations and infinite height of lift.

Tirak X Series has an unlimited height of lift because the wire rope is not stored in the machine, centrifugal brake for controlled descent in case of power failure and pendant control with up/down and emergency stop.

Lighter than the T-series, the X-series are most suited for bosun's chairs, inspection harnesses, one-man cradles and light suspended platforms.

95
 

Tractel "Tirak" Electric Man-riding Wire Rope Hoist with Unlimited Height Of Lift - Range From 300kg to 2000kg

Tractel Tirak electric hoist for manriding hoist with great duty cycle and numerous build options.

Tirak X Series main features are as follow. Unlimited height of lift due to the fact that the wire rope is not stored in the machine. It also features a centrifugal brake for controlled descent in case of a power-failure. Additionally it is fitted with a pendant control which incorporates three buttons, these are up, down and an emergency stop. Travel to the work place with the tirak® at speeds up to 18 m/min which is a significant benefit the higher up you have to go. No matter what height, the tirak® hoist will take you there safely and speedily. Different electrical and pneumatic power supplies available

96
 

Tractel Tirak Mobile Lifting Hoist In Heavy Duty Frame with Cable Reeling Drum - Range from 300kg to 3000kg

Tirak Mobile electric winch / hoist for materials. 230v, 110v and 400v Options.

The TIRAK with its compact frame is lighter, smaller and more economic than a crane or a drum winch with the same capacity and complete with a similar length of wire rope.  Features include: Terminal switch for limiting the height of lift wherever desired, emergency lowering in power failure at a controlled speed, electrical system suitable for use on building sites, easy to operate push button pendant control and heavier loads can be handled using winch with snatch blocks. Full safety features including limit switches and release/lower facility.

97
 

LiftingSafety "Electric Powered Lifting" Man-Riding Tripod. Lightweight Aluminium Construction (when compared to a Steel equivalent) with Fall Protection and Rescue Options.

Tripod system for use with manriding electric / compressed air or manual wire rope hoists. (SWL 500kg for materials only)

LiftingSafetys electric / compressed air powered tripod system with single or 3 phase hoisting/lifting hoist with EC Declaration is fully certified for man-riding applications and has a number of unique safety features including: Back-up fully independent fall arrest system. Independent rescue system. Top and bottom limit switches. Self contained automatic rope reeler (no handling or tangling issues, less chance of accidental damage). Manual emergency descent system to lower the casualty in the event of an emergency / power failure. Overload alarm (electric option only) that can be factory set to sound / warn at a capacity chosen by the client. Pendant control with 'dead man' operation.

98
 

Tractel Bravo Lightweight Lever Hoist - Range from 250kg to 9000kg

Tractel Bravo hand lever chain hoist for lifting, pulling and tensioning. Optional overload limiter.

Lightweight and portable with simple controls.

Bravo models, available from 1/4 to 6 tons, are suitable for a wide variety of lifting, pulling and tensioning applications: for lifting and lowering loads in manufacturing and assembly operations, removing engines, rigging and moving loads, applying tension to conveyor belts and a wide range of other applications. Available in sizes 500kg, 750kg, 1500kg, 3000kg, 6000kg.

99
 

Tractel "Tralift" Manual Chain Hoists, Top Hook Suspended - Range from 250kg to 20,000kg

High quality lightweight reliable low maintenance manual chain hoist and hooks with 360° swivel.

Tralift Manual Chain Hoist from Tractel has a Hook suspension with 360° swivel, Tested to 150% of WLL, Automatic brake with double pawl system.

Self-lubricating chain, corrosion resistant, made to standard NFE 26-010 (resists marine mists >800 h. and temperatures to 280° C). Optional load limiter.

Available in sizes 250kg, 500kg, 1000kg, 1500kg, 2000kg, 3000kg, 5000kg, 10,000kg and 20,000kg.

100
 

Tractel TRALIFT TE Electric Chain Hoist, 3 phase 400v 3Ph - Range 125kg to 2000kg

Available in 2 options of suspension, by hook or with a CORSO trolley (3 options available).

This has adjustable upper and lower operational electrical limit switches, emergency stop on pendant control box, friction clutch load limiter operating as a safety limit switch. Robust, can be used with minimum headroom.  Reduced maintenance.

Available in 125kg, 250kg, 500kg, 1000kg and 2000kg capacities.

101
 

Ingersoll Rand "Liftchain" Compressed Air Hoist (Pneumatic Hoist) - Range from 1500kg to 100,000kg

Liftchain hoists for reduced downtimes and increased safety.

The Ingersoll Rand liftchain air hoist has a rugged, compact and lightweight design. All steel construct ion for better durability, particularly adapted for difficult environments. Insensitive to dust and humidity, 100% duty cycle, grade 80 calibrated load chain and corrosion resistant treated.
102
 

Ingersoll Rand Heavy Duty Premium Lever Hoist - Range from 750kg to 6000kg

High performance manual lever hoist - Pressed steel body.

Ingersoll Rand's line of Lever Chain Hoists offer the ultimate in performance, endurance, and safety. Capacities and features make these Lever Chain Hoists perfect for all industrial lifting, pulling, and positioning applications. It uses a simple one-hand free chaining operation. 360° rotation handle needs only 15° handle movement to ratchet loads. Ideal for tight spaces.

103
 

Ingersoll Rand Zinc Nickel Chrome Plated Industrial Lever Hoist - Range from 750kg to 6000kg

Durable hand chain hoist with pressed steel body and corrosion resistance.

This lever hoist has a zinc nickle chrome plated finish which is more durable and corrosion resistant than paint. The patent pending "Arrow-Notch" free chain system is simple and reliable. Just one hand turns the indicator and operators will enjoy the easiest free chaining we have ever tested. Try to operate in free chain mode and the brake instantly engages, holding the load, minimizing the risk of an accident.

Value priced lever hoist with industrial rated performance.

104
 

Ingersoll Rand "VL2" Premium Hand Chain Hoist, Top Hook Suspended - Range from 500kg to 20,000kg

Premium hand chain hoist thats built for heavy duty applications with high performance requirements including marine environments.

Top of the line manual chain hoist, the VL2 Series exclusive hand chain guide provides smooth, even operation and eliminates jamming when operated away from the load area. Forged steel alloy load hooks with non-slip design have extra wide throat openings for easy rigging. Perfect for construction, maintenance, rigging and shipbuilding.

Available in sizes 500kg, 1000kg, 1500kg, 2000kg, 3000kg, 5000kg, 8000kg, 10,000kg, 15,000kg and 20,000kg.

105
 

Ingersoll Rand "SMB" Hand Chain Hoist, High Performance and Durable, Top Hook Suspended - Range from 500kg to 5000kg

Stamped steel construction for decreased weight and better impact resistance, zinc plated hand chain as standard.

A NEW design for the modern workplace with safety and performance in mind. Meets or exceeds world specifications including ASME B30.16 and 2M standards. It features an improved 4 layer finish of nickle, copper, and chrome complementing the silver series lever hoist companion product, stamped steel construction for decreased weight and better impact system.

Available in sizes 500kg, 1000kg, 2000kg, 3000kg and 5000kg.

106
 

SALA "Talon" Tie-Back Inertia Reel Personal Fall Limiter (PFL) with Snap Hook Lanyard - 3.1 metre

SALA "talon" single leg lightweight tie-back retractable "self retracting lifeline" (SRL) webbing lanyard, 3.1m in total length, 0.9m of tie-back webbing, 2268kg gated (snap) hook. Complies to EN360

The Industry’s First SRL that Is Designed to Withstand the Forces and Wear Associated with Tie-Back Use. Main Features include Unique snap-hooks with 2268kg gate strength designed specifically for tie-back use. Eliminates the need for a separate anchorage connector, minimizing cost and installation time. Three layers of webbing in the tie-back area of the lifeline provide more abrasion resistance for added safety. 1m of tie-back webbing ensures that the lifeline can be anchored around most structures. Covered external shock pack reduces the forces imposed on the user and also acts as an impact indicator for visual inspection. Compact, lightweight design does not hinder movement providing added worker satisfaction and productivity. Quick-connect handle allows it to be mounted directly to a harness.
107
 

SALA "Talon" Twin Leg Inertia Reel Personal Fall Limiter (PFL) Polyester Webbing Lanyard with Scaffold Hooks - 1.8 Metre

SALA "Talon" twin leg retractable (Self retracting) webbing lanyard, 60mm throat opening aluminium hook on each lifeline, includes Delta™ Comfort Back Pad and two Lanyard Keepers. Complies to EN360

Twin-Leg 100% Tie-Off Design Provides Continuous Fall Protection and Added Mobility.The industry’s first twin-leg SRL is truly unique and innovative. Quick-connect handle and built-in strap secures SRL directly to the harness and keeps unit in position. Two separate 1.8m lifelines extend and retract as the worker moves, providing continuous fall protection without restrictions. Impact indicator on each lifeline makes inspections quick and easy. Compact, lightweight design does not hinder movement providing increased worker comfort and productivity. Durable nylon plastic housing features a non-obtrusive design with rounded corners, providing all-day comfort. Meets EN 360 CE standards.
108
 

Reid "Porta-Gantry" Light Weight Portable Aluminium Lifting Gantry with Castors, Range 500kg to 5000kg

Top Quality UK Manufactured Unique Versatile Portable Gantry System with Multiple Height and Beam Length Configurations. ATEX and Man-Riding Certified!!

109
 

Donati DLK Electric Chain Hoist 400v 3Ph 50Hz - Range from 125kg to 2000kg

Single chain fall, 2 year warranty, available in 3 suspension options.

Electric Chain Hoist has a 2 year warranty, Single chain fall, has 3 suspension options - Hook, Hand push trolley and motorised trolley. Available in 125kg, 250kg 500kg, 1000kg and 2000kg capacities.

110
 

Sala Advanced "Pole Hoist Davit". Lightweight Aluminium For Manriding using Independent Overhead Anchorage

Connected via single anchor point, allowing you to work from direction from any angle. Complete with optional man-riding hoist.

The perfect solution for confined space entry / retrieval applications. Connects via a single suitable anchorage point. The 2 piece system attaches with a carabiner on the universal bracket to any suitable anchor point, allowing you to work in any direction from any angle. The system has a unique swivle head that rotates 360 degrees, providing unparalleled flexibility in both vertical and horizontal confined-space entries.
Overall length adjusts from either 4’ - 7’ (1.2 m - 2.13 m) or 6’ - 10’ (1.8 m - 3.05 m) for positioning attendant for working in close quarters. Custom Pole Hoist sizes are available.

111
 

LiftingSafety Electric Powered Low Headroom Cantilever Materials Hoist System, 1Ph / 3Ph upto 6000kg

Electric / Pneumatic Close Headroom (cantilever) materials lifting hoist, suitable for compact or confined space installations. Modular lightweight construction.

LiftingSafety offer our low headroom materials lifting hoists for permanent or temporary installations up to 6 tonne safe working load and are specifically designed for low head room and cantilever lifting beam applications, often in locations where traditionally a davit arm or swing jib crane may have been utilised.
112
 

Ultra Quick Set Up Multi Purpose Lightweight Aluminium A-Frame Gantry, upto 500kg

Unique and easily transportable multi purpose gantry crane systems which are designed to safely lift up to 500kg, assembly requires just 2 pins, with optional beam length of upto 4m

113
 

Kito CBS Trolley Connected Hoist (Push and Geared Travel) - Range from 500kg - 30,000kg

Kito plain (push travel) or geared (chain drive) trolley hoists.

This is available in two models, the plain push trolley or the geared trolley.

The plain push trolley comes with capacities of 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg and 5000kg.

The geared trolley comes with capacities of 500kg, 1000kg, 1500kg, 2000kg, 2500kg, 3000kg, 5000kg, 7500kg, 10,000kg, 15,000kg, 20,000kg and 30,000kg.

114
 

Sala "Twin Leg" Sewed Rope Restraint Lanyard. No Karabiners - Length Options 1, 1.3 and 2 Metre

Sewed lanyard with rope diameter of 10.5mm for restraint use only

Sala Sewed Fall Arrest Lanyard Available in 1, 1.3 , and 2m. Comply with the EN354 standard.

Polyamide white colour, 10.5mm diameter, identification thread, yellow and red wear indicator

System breaking strength ->2200 daN

115
 

William Hackett C4 Hand Chain Block, Top Hook Suspended - Range from 500kg to 50,000kg

Hacketts hook suspended manual chain hoist.

These Chain blocks Have a galvanised hand chain unique chain joiner. Available in sizes 500kg, 1000kg, 1600kg, 2000kg, 3200kg, 5000kg, 10,000kg, 15,000kg, 20,000kg, 30,000kg and 50,000kg.

Comprehensive spare parts available from stock

116
 

Tractel “Stopfor LCM 05” Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster & X Hook. “Adjustable restraint Lanyard” – 2, 3 or 4m

Tractel "Stopfor LCM 05" Support Lanyard Supplied without Sheath with one M41 connector

The STOPFOR K is a new-generation lanyard tensioner-reducer. This device enables fine-adjustment of the rope length to within a millimeter. By its unique design, the user can adjust his position with one hand, even if the device is tensioned. Supplied with one M10 connector on the unit and available with 2m, 3m or 4m 12.5mm diameter braided rope with one M41 connector attached.

117
 

Tractel “LCM 04” Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster & X Hook. “Adjustable restraint Lanyard” – 2, 3 or 4m

Tractel LCM 04 Support Lanyard

The work positioning lanyard LCM04 is a manually adjusted tensioner-reducer. This device works on a low-stretch rope
with diameter of 12.5 mm and length of 2, 3 or 4 m.The LCM04  is compact and ergonomic and perfectly suited for work positioning.

Comes complete with 1xM10 connector on unit and 1xM40 connector on rope.

118
 

Tractel “LCM 02 ” Adjustable Pole Strap for Work Positioning c/w Aluminium Sliding Cam Adjuster & Snap Hook. “Adjustable restraint Lanyard” – 2, 3 or 4m

For use with 16mm Stranded rope

The Tractel LCM 02 is a twisted rope, 16mm diameter, positioning lanyard with an aluminium blocking device with one stiched and spliced buckle. It comes complete with one M40 X-hook connector. Weight : 1060 g. These lanyyards are used to support the person who is working, they are not fall protection devices.

119
 

Tractel “LCM 02 ” Adjustable Pole Strap for Work Positioning c/w Steel Sliding Cam Adjuster & X Hook. “Adjustable restraint Lanyard” – 2, 3 or 4m

For use with 16mm Stranded rope

The Tractel LCM 02 is a twisted rope, 16mm diameter, positioning lanyard with a steel blocking device with one stiched and spliced buckle. It comes complete with one M40 X-hook connector. Weight : 1300 g. These lanyyards are used to support the person who is working, they are not fall protection devices. A 50cm protective sleeve is offered as an option on this product.

120
 

Tractel “LCM 03” Adjustable Pole Strap for Work Positioning c/w Aluminium Sliding Jaw Adjuster & Snap Hook. “Adjustable restraint Lanyard” – 2, 3 or 4m

Supplied with steel cable reinforced braided rope, diameter 16mm

The Tractel LCM 03 is a steel cable reinforced braided rope (16mm diameter), positioning lanyard comprising of an aluminium blocking device with one stiched and spliced buckle. It comes complete with one M40 X-hook connector. Weight : 1080 g.These lanyyards are used to support the person who is working, they are not fall protection devices. A 50cm protective sleeve is offered as an option on this product.
121
 

“Stopfor B” LCM 06 Adjustable Pole Strap for Work Positioning c/w Sliding Jaw Adjuster & Snap Hook. “Adjustable restraint Lanyard” – 2, 3 or 4m

Tractel "Stopfor B" Support Lanyard Supplied with or without Sheath with one M41 connector and one M10 connector

The Stopfor B LCM06 is a new-generation lanyard tensionerreducer. This device enables fine-adjustment of the rope length to within a millimeter. By its unique design, the user can adjust his position with one hand, even if the device is tensioned. The Stopfor B LCM06 operates with a polyamide 14 mm braided rope. The device is ergonomic and designed for easy, effort-free rapid adjustment. The unit can be opened to allow the user to perform maintenance on the product without disassembling the tensioner.
122
 

Tiger TGS / TGT Geared Travel Trolleys - Range from 500kg to 30,000kg

Geared Travel Trolleys - Single or Twin Bar

Tiger geared travel trolleys are designed to provide smooth and easy traversing along the beam. The anti-drop plates design ensure extra safety and also prevent damage to wheels when contacting end rail stoppers. Wheels run on sealed ball bearings, making smoother rolling with less effort and maintenance. Twin bar or single bar trolleys available. Geared Trolley Range from 0.5t to 20.0t (push travel trolley version also available). Extended beam width available to suit wide range beams.
123
 

Kito CX Manual Chain Hoist, Top Hook Suspended - 250kg

Kito CX lightweight, aluminium body hand chain hoist, Overload limiter as standard

The Kito CX Mini Manual Chain Hoist is perfect for lifting a light load, its ultra compact, portable build allows for safe operation in tight areas.

The Hoist boasts an advanced safety mechanism and Overload Limiter as standard.

124
 

Kito CF Series Aluminium Manual Chain Hoists, Top Hook Suspended Range from 500kg to 3,000kg

Kito CF Series Aluminium die-cast body, high accuracy, easy maintenance Hand Chain Hoist

Kito CF Series Manual Chain Hoists provide years of quality, reliable service due to the high quality components used when the hoist is manufactured.

The CF manual hoists are fabricated with head-treated components, sealed bearings and industry-leading quality.

125
 

Kito "RCB Series" Atex Hand Chain Hoist Range 500kg to 3000kg

Kito RCB Spark-Resistant Hand Chain Hoist - Perfect for environments where anti-sparking improves safety.

Perfect for environments with combustible gases, vapors, and dusts. Kito's RCB Series Spark-Resistant Hand Chain Hoist is designed for petroleum, gas, pharmaceutical and food industries - or any environment where safety is improved by the use of anti-sparking equipment.
126
 

Kito "SHB Series" Ultra-Low Headroom Manual Chain Hoist - Range 1000kg to 10000kg

Ultra-Low Headroom Geared Trolley Combination Chain Hoist - 1 to 10 tonne Capacity, Steel Body Hoist, with Built-in Geared Trolley

Kito's "SHB Series" Ultra-Low Headroom Manual Chain Hoist is perfect for lifting applications where space is limited and where longer hook travel is required.

The trolley comes with an built-in geared trolley configuration that minimizes beam-to-hook distance allowing for extra lifting space.

127
 

Kito "EQ Series" Lightweight, Normal Duty Electric Chain Hoist - Range 125kg to 1000kg

Kito Electric Hoist with Inverter, Overload Limiter, Friction Clutch, Corrosion Resistant load chain

The Kito "EQ Series" Electric Chain Hoist is equipped with an Inverter which can change the control between mechanical and electrical, whilst keeping its conventional rigidity and high functions.

In addition to the safety functions such as the Overload Limiter, Friction Clutch and Upper-Lower limit switch, Push Buttons have been redesigned to allow prolonged use with ease.

128
 

Donati DMK Electric Chain Hoist 400v 3Ph 50Hz - Range from 125kg to 4,000kg

Manual, Geared, And Electric Trolleys Available, Single or Dual Speed

The DMK series electric chain hoists can be used in fixed execution (hook or eye) with hand-pushed trolley, electric trolley, trolley in low headroom configuration also in climbing execution. The hight quality of Donati products is guaranteed by a Quality System Certificate UNI EN ISO 9001:2000.
129
 

Hadef Premium AKS Electric Chain Hoist with Eye Suspension, Range from 250kg to 30,000kg

Compact design with overload protection built-in as standard. Atex option available

IP 55 Enclosure / optional IP 66, Mechanic hoist protection by current cut-off (AKS 4-8)

Zinc plated high quality RUD load chain.

Atex Certification Available.

130
 

LiftingSafety Light Weight Portable Aluminium Lifting Gantry with Castors, Range 500kg to 5000kg

Fully Adjustable Unique ATEX Certified Portable Gantry System that is also Certified for Man-riding. Optional Height and Beam Lengths.

131
 

Hadef Premium AKR Electric Chain Hoist with Push Travel Trolley. Range 250 to 30,000kg

Compact design with built in manual travel trolley. Overload Protection included as standard. Atex Option Available

Compact Design, IP 55 Enclosure / optional IP 66, Mechanic hoist protection by current cut-off (AKR 4-8)

Zinc plated high quality RUD load chain.

Atex Certification Available.

Comes as standard with Push Travel Trolley.

132
 

Hadef Premium AKH Electric Chain Hoist with Geared Travel Trolley. Range 250 to 30,000kg

Compact design with built in geared travel trolley. Overload protection included as standard. Atex option available

IP 55 Enclosure / optional IP 66, Mechanic hoist protection by current cut-off (AKH 4-8)

Zinc plated high quality RUD load chain.

Atex Certification Available.

Comes as standard with Geared Travel Trolley.

133
 

Hadef Premium AKE Electric Chain Hoist with Electric Travel Trolley. Range 250 to 30,000kg

Compact design with built in electric powered (motorised) trolley. Overload protection included as standard. Atex option ovailable

IP 55 Enclosure / optional IP 66, Mechanic hoist protection by current cut-off (AKH 4-8)

Zinc plated high quality RUD load chain.

Atex Certification Available.

Comes as standard with Electric (motorised) Travel Trolley.

134
 
135
 

Hadef Premium EE Low Headroom Electric Chain Hoist with Electric Travel Trolley. Range 500kg to 40,000kg

Low headroom monorail electric hoist with inbuilt electric powered (motorised) trolley.

136
 
137
 

Hadef APS Stationary Pneumatic Hoist With Suspension Eye Range 500kg to 30,000kg

Overload Protection by main air supply cut-off

Hadef APS Stationary Pneumatic Hoist With Suspension Eye Range 500kg to 30,000kg, Overload Protection by main air supply cut-off
138
 

Hadef APR Pneumatic Hoist With Push or Geared Travel Trolley Range 500kg to 5,000kg

Overload Protection by main air supply cut-off

Hadef APR Pneumatic Hoist With Push or Geared Travel Trolley Range 500kg to 5,000kg, Overload Protection by main air supply cut-off
139
 

Hadef APP Pneumatic Hoist With Pneumatic Travel Trolley Range 500kg to 30,000kg

Overload Protection by main air supply cut-off

Hadef APP Pneumatic Hoist With Pneumatic Travel Trolley Range 500kg to 30,000kg, Overload Protection by main air supply cut-off
140
 

Hadef 11/09 Aluminium Spur Gear Hoist, Range from 500kg to 20,000kg

Aluminium Body, Precision Gear, Zinc Plated Load & Hand Chain

Hadef 11/09 Aluminium Spur Gear Hoist, Range from 500kg to 20,000kg, Aluminium Body, Precision Gear, Zinc Plated Load & Hand Chain
141
 

Hadef 14/12 Premium Spur Gear Hoist, Range from 500kg to 10,000kg

Sintered Brake Lining With Guarentee

Hadef 14/12 Premium Spur Gear Hoist, Range from 500kg to 10,000kg, Sintered Brake Lining With Guarentee
142
 

Hadef 9/12 Premium Spur Gear Hoist, Range from 500kg to 20,000kg

Two Pawls, High Safety Factor, With Hoist Protection

Hadef 9/12 Premium Spur Gear Hoist, Range from 500kg to 20,000kg, Two Pawls, High Safety Factor, With Hoist Protection
143
 

Hadef 21/12 Manual Chain Hoist with Trolley Range 500kg to 10,000kg

Manual chain hoist with integrated push trolley or geared trolley.

144
 

Hadef 23/09 Aluminium Spur Gear Hoist With Trolley, Range 500kg to 5,000kg

Manual aluminium chain Hoist with combined push trolley or geared travel.

145
 

Hadef 28/98 Low Headroom Manual Chain Hoist with Trolley, Range 500kg to 25,000kg

With Push Travel or Geared Travel Trolley

Hadef 28/98 Low Headroom Manual Chain Hoist with Trolley, Range 500kg to 25,000kg, With Push Travel or Geared Travel Trolley
146
 

Hadef 29/98 HH Ultra Low Headroom Manual Chain Hoist with Geared Travel Trolley, Range from 1,000kg to 30,000kg

Very low headroom manual chain hoist with built-in hand geared trolley.

Hadef 29/98 HH Ultra Low Headroom Manual Chain Hoist with Trolley, Range 1,000kg to 30,000kg, With Hand Geared Trolley
147
 

Hadef TA Articulated Single Girder Underslung Crane, Range 250kg to 1,500kg

Available with Spur Gear or Electric Chain Hoist

Hadef TA Articulated Single Girder Underslung Crane, Range 250kg to 1,500kg, Available with Spur Gear or Electric Chain Hoist
148
 

Hadef Professional 62/05 Electric Chain Hoist - Top Hook / Eye Suspended. Range 125kg to 2,000kg

Easy to use, compact and lightweight electric hoist with hook or eye suspension for mounting to lifting point.

149
 

Hadef Professional 62/05R Electric Chain Hoist with Push Travel Trolley, Range 125kg to 2,000kg

Easy to use, compact and lightweight electric hoist with integrated push trolley.

150
 

Hadef Professional 62/05H Electric Chain Hoist - with Hand Geared Trolley, Range 125kg to 2,000kg

Easy to use, compact and lightweight electric hoist with built-in geared trolley.

151
 

Hadef Professional 62/05E Electric Chain Hoist - with Electric (Motorised) Trolley, Range 125kg to 2,000kg

Easy to use, compact and lightweight electric hoist with built-in electric powered trolley.

152
 

GIS Food Grade Electric Chain Hoist - Range from 250kg to 1250kg

Electric 3 phase Food Grade / Pharmaceutical Environment Chain Hoist. Lug or Top Hook Suspended

153
 

Tractel "Tralift TS" Electric Chain Hoist - 60kg to 5000kg Capacities with Various Power Options

Also available with options that include Low Headroom and Dual lift versions.

154
 

Stahl ST Electric Chain Hoist - Capacities from 125kg up to 5.0 tonnes

Stahl 400v 3ph electric hoists with a wide variety of options such as extra low headroom and atex certification.

155
 

LiftingSafety Fall Arrest Inertia Reel Personal Fall Limiter (PFL), 1.8 metre. Designed for MEWP Applications

Personal self-retracting fall arrest inertia reel block with aluminium housing, webbing lifeline and a choice of connectors. Designed for use on mobile elevated work platforms.

156
 

Unique 'Tenso' Two Part Ratchet Strap with Tension Accumulator, 50mm Wide Webbing, 9 metre or Custom length

Ratchet strap with built in tension accumulator to ensure that the system is always taught.

157
 

"Cobra" Compact Round Lifting Slings (endless lifting slings). Conforms to BS EN 1492-2 - Range from 1000kg to 5,000kg.

Round Lifting Slings (Fibre Endless Slings) with circular/tubed body (thinner and more rigid when compared to standard round slings).

158
 

GIS CH Electric Chain Hoist - Range from 400kg to 5000kg

3 Phase and Single Phase Electric Chain Hoist with Lug, Hook, or Beam Trolley Suspension Options

159
 

Round Polyester Lifting Slings (endless lifting slings). Conforms to BS EN 1492-2 - Range from 1000kg to 8000kg.

Quality EU Manufactured, ELRO Round Lifting Slings (Fibre Endless Slings). Factor of Safety 7:1

160
 

Free Standing 'C' Track Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Column Mounted Slewing Jib Crane with Over Bracing, with various Capacity, Height and Reach options.

161
 

Free Standing 'I' Beam Profile Under braced Swing Jib Crane, Range: 80kg to 1000kg

Column Mounted Slewing Jib Crane with Under Bracing, with various Capacity, Height and Reach options.

162
 

Free Standing 'I' Beam Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Column Mounted Slewing Jib Crane with overbraced arm, with various Capacity, Height and Reach options.

163
 

Wall Mount 'C' Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Wall Mounted Slewing Jib Crane with Over Bracing, with various Capacity and Reach options.

164
 

Clamp Mount 'C' Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Clamp (Around Column) Slewing Jib Crane with Over Bracing, with various Capacity and Reach options.

165
 

Wall Mount 'I' Beam Profile, Under-Braced Swing Jib Crane, Range: 80kg to 1000kg

Wall Mounted Slewing Jib Crane with Under Bracing, with various Capacity and Reach options.

166
 

Clamp Mount 'I' Beam Profile, Under-Braced Swing Jib Crane, Range: 80kg to 1000kg

Clamp (Around Column) Slewing Jib Crane with Under Bracing, with various Capacity and Reach options.

167
 

Wall Mount 'I' Beam Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

Wall Mounted Slewing Jib Crane with Over Bracing, with various Capacity and Reach options.

168
 

Clamp Mount 'I' Beam Profile, Over-Braced Swing Jib Crane, Range: 80kg to 1000kg

RSJ/Column mounted (Clamp Around Column) slewing jib crane with over bracing, with various capacity and reach options.

169
 

Tiger Corrosion Resistant Chain Hoist and Push Trolley Combination - Range: 500kg to 5000kg

Tiger manual chain block with integrated push travel beam/girder trolley to suit various beam widths.

170
 

Tiger Corrosion Resistant Chain Hoist and Geared Trolley Combination - Range: 500kg to 30,000kg

Tiger manual chain block with integrated hand chain driven travel beam/girder trolley to suit various beam widths.

171
 

Sala "Nano-Lok XL" Webbing Self Retracting Lifelines with Optional Lengths and Fittings

Sala Nano Lok Extended Length SRL (Self Retracting Lifeline) with Lengths from 2.8m to 3.4m and Optional Lifeline & Anchorage Fittings

172
 

Sala "Nano-Lok XL" Twin Leg Webbing Self Retracting Lifelines with Optional Lengths and Fittings

Sala Nano Lok Extended Length 2 Leg SRL (Self Retracting Lifeline) with Lengths from 2.8m to 2.9m and Optional Lifeline Fittings

174
 

Manually Operated Ultra High Pressure Hydraulic Pumps, Two Speed

Manual Hydraulic Hand Pump, Working Pressure Up to 2800 Bar

175
 

Manually Operated Hydraulic Foot Pump, Two Stage Operation

Manual Hydraulic Foot Pump, Working Pressure Up to 700 Bar

176
 

Tiger Low Headroom Chain Hoist with Integrated Geared Trolley - Range from 1000kg to 10,000kg

Tiger manual hand chain block with integrated geared travel beam trolley.

177
 

Tiger Ultra Low Headroom Chain Hoist with Integrated Geared Trolley - Range from 1000kg to 12,000kg

Tiger manual hand chain block with integrated geared travel beam trolley.

178
 

Hadef 9/12 VA Stainless Steel Hand Chain Hoist, 500kg to 3000kg

Fully stainless steel manual chain block with spur gear drive.

179
 

G-Davit Lightweight Davit Anchorage Device for Confined Space Access and Working at Height Situations

EN795 & TS16415 anchorage device for confined space access and working at height situations, for temporary or permanent access.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top