LIFTINGSAFETY

RWM W Electric Chain Hoist 400V 3Ph 50Hz - Range from 125kg to 2000kg

Compact in size for best possible closed headroom. Any voltage available on request! Optional suspension types including lug, hook or trolley (manual/geared or electric (powered/motorised)).

Model: 

W-series / WS-3386


Description

+

Lifting Motor

The cylindrical parallel rotor is produced with single windings for single speed hoists or dual windings for dual speed hoists and all have class F insulation.

Manufacture in accordance with FEM class 2m, the duty cycle for single speed hoists is 40% and 10 + 30% for dual speed hoists. The supply  voltage for these motors can be specified when ordering and they are available in a wide range of voltages, phases and hertz, thus making the RWM chain hoists again very versatile and capable of working in any environment.

The braking system of the chain hoist uses a 230V spring-activated electro magnetic brake which allows for quick and safe stopping allowing the load to be held at any desired height or position. The chain hoist has an IP54 protection which protects it against just, limited ingress and against low pressure jets of water from all directions, limited ingress, for standard indoor use. For other environments, please contact RWM.

Reduction Gears

Found in the gear box’s are epicycloid, totally enclosed and lubricated with a permanent high performance grease. The gears are manufactured from high tensile steel and are hardened and heat treated for smooth operation and maximum life span. In addition, due to its sealed lubrication, the chain hoist can operate within a temperature range of -20°C to +60°C.

Overload by Clutch

The slipping clutch is a safety device which limits both the up and down stroke of the chain hoist, by limiting a possible overload. It is constructed from asbestos free braking plates held under pressure by cup springs and is adjustable. Note: this is only a safety feature and should not be used as a working limit. The clutch is setting at 15% respect the nominal capacity of hoist.

Electrical Control Panel

The panel is fully hard wired with all components mounted on a steel backing plate. The panel includes high quality contactor switches, a  transformer for low voltage (24V) controls, brake rectifier, fuses and connector terminals.

Thanks to these high quality components, up to 240 operations per hour can be carried out. The electrical control panel is mounted in an IP65 plastic enclosure and follows the CEI-EN 60204 norms. In addition, the panel are fully compatible and interchangeable with a full range of hoist models.

Guide Chain

The hoists central body and patented chain guide are machined from one single casting, this allows precise possitioning of the load chain into the load sprocket.

Specifications

+

Specifications

W Series Part No: SWL (Kg) Speed m/min Hoist (Kw) Chain Dia. (mm)
 Falls of Chain
125 W 5 125 5 0.5 4 1
125 W 8 8 0.5 4 1
125 W 12 14 1 4 1
125 W 14 1 - 4 0.2 - 0.5 4 1
125 W 28 2 - 8 0.2 - 0.5 4 1
125 W 312 3.5 - 14 0,2 - 0,5 4 1
250 W 5 250 5 0.5 4 1
250 W 8 8 0.8 4 1
250 W 12 12 1 5 1
250 W 16 16 1 5 1
250 W 14 1 - 4 0.2 - 0.5 4 1
250 W 28 2 - 8 0.25 - 1 5 1
250 W 312 3 - 12 0.25 - 1 5 1
500 W 4 500 4 0.8 5 1
500 W 6 6 0.8 5 1
500 W 8 8 1 5 1
500 W 12 12 1.4 5 1
500 W 14 1 - 4 0.25 - 1 5 1
500 W 28 2 - 8 0.4 - 1.8 7 1
1000 W 4 1000 4 1 7 1
1000 W 6 6 1.6 7 1
1000 W 8 8 2 10 1
1000 W 14 1 - 4 0.4 - 1.8 7 1
1000 W 28 2 - 8 0.5 - 2 10 1
1500 W 4 1500 4 2 10 2
1500 W 8 8 2 10 2
1500 W 14 1 - 4 0.5 - 2 10 2
1500 W 28 2 - 8 0.7 - 3 11 2
2000 W 4 2000 4 2 10 2
2000 W 14 1 - 4 0.5 - 2 10 2

Mounting

+

Mounting Options

 

Type F

  

Type CS
Type F - Hook Suspension (eye)
 Type CS - Push travel
 

Type CE

  

Type CM
Type CE - Powered Travel
 Type CM - Geared Travel

Dimensions

+

Dimensions

Type F - CS Dimensions and Technical Specifications

Dimensions

Model Capacity (kg) Speed m/min Kw Pull of chain Ø chain Dimensions (mm) Weight (kg)
A B B1 C1 C2 C3 C4 D D1 E F G H I L M N R S T U Ø wheel F
 CS
125W5 125 5 0.5 1 4mm 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
125W8 8 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
125W12 14 1 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
125W14 1 - 4 0.2 - 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
125W28 2 - 8 0.2 - 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
125W312 3.5 - 14 0.2 - 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
250W5 250 5 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
250W8 8 0.8 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
250W12 12 1 5mm 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
250W16 16 1 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
250W14 1 - 4 0.2 - 0.5 4mm 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
250W28 2 - 8 0.25 - 1 365 255 70 130 225 200 460 185 38 110 1 31 8 196 100 358 65 50 150 14 60 50 35 35
250W312 3 - 12 0.25 - 1 5mm 400 255 70 130 225 200 490 185 38 110 12 31 8 196 100 358 65 50 150 14 60 50 35 41
500W4 500 4 0.8 370 255 70 130 225 200 435 175 38 110 12 31 8 196 100 370 65 50 150 14 60 50 29 35
500W6 6 0.8 370 255 70 130 225 200 435 175 38 110 12 31 8 196 100 370 65 50 150 14 60 50 29 35
500W8 8 1 380 255 70 130 235 200 460 185 38 110 12 31 8 196 100 380 65 50 150 14 60 50 35 41
500W12 12 1.5 380 255 70 116 235 200 460 185 38 110 12 31 8 196 100 380 65 50 150 14 60 50 35 41
500W14 1 - 4 0.25 - 1 380 255 70 116 235 200 460 185 38 110 12 31 8 196 100 380 65 50 150 14 60 50 35 41
500W28 2 - 8 0.4 - 0.8 7mm 410 275 75 116 260 230 490 200 58 125 18 36 12 290 162 430 73 70 200 18 90 70 44 57
1000W4 1000 4 1 435 275 75 116 240 230 475 190 58 125 18 36 12 290 162 440 73 70 200 18 90 70 41 54
1000W6 6 1.6 445 275 75 116 260 230 490 200 58 125 18 36 12 290 162 440 73 70 200 18 90 70 44 57
1000W14 1 - 4 0.4 - 1.8 445 275 75 116 260 230 490 200 58 125 18 36 12 290 162 440 73 70 200 18 90 70 44 57
1000W8 8 2 10mm 520 315 90 185 275 235 510 245 62 135 40 41 15 290 162 505 92 70 320 22 90 70 67 83
1000W28 2 - 8 0.5 - 2.0 520 315 90 185 290 235 525 245 62 135 40 41 15 290 162 505 92 70 320 22 90 70 69 85
1500W4 1500 4 2 2 618 315 90 185 275 235 510 245 62 135 40 41 15 290 162 595 92 70 320 2 90 70 82 98
1500W14 1 - 4 0.5 - 2 618 315 90 185 290 235 528 245 62 135 40 41 15 290 162 595 92 70 320 22 90 70 87 102
2000W4 2000 4 2 618 315 90 185 275 235 510 245 62 135 40 41 15 290 162 595 92 70 200 22 90 70 82 98
2000W14 1 - 4 0.5 - 2 618 315 90 185 290 235 525 245 62 150 40 41 15 290 162 595 92 70 200 22 90 70 87 102

Type CE - CM Dimensions and Technical Specifications

Dimensions

Model Capacity (kg) Speed m/min Kw Pull of chain Ø chain
 Dimensions (mm) Weight (kg)
C1 C2 C3 D H I L M N O P R S T V Ø wheel CE CM
125W5 125  5 0.5
 1
 4mm
 130
 235
 200
 175
 8
 290
158
 375
 65
 265
 15
 65
 150
 14
 88
 65
 57
 43
125W8  8 0.5
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
125W12  14 1
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
125W14  1 - 4
 0.2 - 0.5
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
125W28  2 - 8
 0.2 - 0.5 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
125W312  3.5 - 14
 0.2 - 0.5 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W5 250 5 0.5
 130
 235
 200 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
250W8 8 0.8
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
250W12 12 1
 5mm
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W16 16 1
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W14 1 - 4
 0.2 - 0.5
 4mm
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
250W28 2 - 8
 0.25 - 1
 130
 235
 200
 175
 8
 158
 385
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W312 3 - 12
 0.25 - 1
 5mm
 130
 235
 200
 175
 8
 158
 385
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W4 500 4 0.8
 130
 235
 200
 175
 8
 158
 390
 65
 265
 145
 65
 150
 14
 88
 65
 5
 45
500W6 6 0.8
 130
 235
 200
 175
 8
 158
 390
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
500W8 8 1
 130
 235
 200
 185
 8
 158
 400
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W12 12 1.5
 116
 235
 200
 185
 12
 158
 400
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W14 1 - 4
 0.25 - 1
 116
 235
 200
 185
 12
 158
 400
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W28 2 - 8
 0.4 - 1.8
 7mm
 116
 260
 230
 200
 12
 162
 405
 73
 265
 145
 70
 200
 18
 90
 70
 74
 60
1000W4 1000 4 1
 116
 240
 230
 190
 12
 162
 430
 73
 265
 145
 70
 200
 18
 90
 70
 71
 57
1000W6 6 1.6
 116
 260
 230
 200
 12
 162
 440
 73
 265
 145
 70
 200
 18
 90
 70
 74
 60
1000W14 1 - 4
 0.4 - 1.8
 116
 260
 230
 200
 12
 162
 440
 73
 268
 145
 70
 200
 18
 90
 70
 74
 61
1000W8 8 2
 10mm
 185
 275
 235
 245
 12
 162
 505
 92
 268
 148
 70
 320
 22
 90
 70
 98
 86
1000W28 2 - 8
 0.5 - 2
 185 290
 235
 245
 12
 162
 505
 92
 268
 148
 70
 320
 22
 90
 70
 102
 88
1500W4 1500 4
 2
 2
 185
 275
 235
 245
 12
 162
 595
 92
 268
 148
 70
 320
 22
 90
 70
 114
 103
1500W14 1 - 4
 0.5 - 2
 185
 290
 235
 245
 12
 162
 595
 92
 268
 148
 70
 320
 22
 90
 70
 117
 107
2000W4 2000 4
 2
 185
 275
 235
 245
 12
 162
 595
 92
 268
 148
 70
 200
 22
 90
 70
 114
 103
2000W14 1 - 4
 0.5 - 2
 185
 290
 235
 245
 12
 162
 595
 92
 268
 148
 70
 200
 22
 90
 70
 117
 107
Downloads

+
RWM ING.2009.pdf

Sales Brochure

Full details of RWM hoists including dimensional drawings with full specifications.
(approx. 2.3Mb)

Lifting Motor

The cylindrical parallel rotor is produced with single windings for single speed hoists or dual windings for dual speed hoists and all have class F insulation.

Manufacture in accordance with FEM class 2m, the duty cycle for single speed hoists is 40% and 10 + 30% for dual speed hoists. The supply  voltage for these motors can be specified when ordering and they are available in a wide range of voltages, phases and hertz, thus making the RWM chain hoists again very versatile and capable of working in any environment.

The braking system of the chain hoist uses a 230V spring-activated electro magnetic brake which allows for quick and safe stopping allowing the load to be held at any desired height or position. The chain hoist has an IP54 protection which protects it against just, limited ingress and against low pressure jets of water from all directions, limited ingress, for standard indoor use. For other environments, please contact RWM.

Reduction Gears

Found in the gear box’s are epicycloid, totally enclosed and lubricated with a permanent high performance grease. The gears are manufactured from high tensile steel and are hardened and heat treated for smooth operation and maximum life span. In addition, due to its sealed lubrication, the chain hoist can operate within a temperature range of -20°C to +60°C.

Overload by Clutch

The slipping clutch is a safety device which limits both the up and down stroke of the chain hoist, by limiting a possible overload. It is constructed from asbestos free braking plates held under pressure by cup springs and is adjustable. Note: this is only a safety feature and should not be used as a working limit. The clutch is setting at 15% respect the nominal capacity of hoist.

Electrical Control Panel

The panel is fully hard wired with all components mounted on a steel backing plate. The panel includes high quality contactor switches, a  transformer for low voltage (24V) controls, brake rectifier, fuses and connector terminals.

Thanks to these high quality components, up to 240 operations per hour can be carried out. The electrical control panel is mounted in an IP65 plastic enclosure and follows the CEI-EN 60204 norms. In addition, the panel are fully compatible and interchangeable with a full range of hoist models.

Guide Chain

The hoists central body and patented chain guide are machined from one single casting, this allows precise possitioning of the load chain into the load sprocket.

Specifications

W Series Part No: SWL (Kg) Speed m/min Hoist (Kw) Chain Dia. (mm)
 Falls of Chain
125 W 5 125 5 0.5 4 1
125 W 8 8 0.5 4 1
125 W 12 14 1 4 1
125 W 14 1 - 4 0.2 - 0.5 4 1
125 W 28 2 - 8 0.2 - 0.5 4 1
125 W 312 3.5 - 14 0,2 - 0,5 4 1
250 W 5 250 5 0.5 4 1
250 W 8 8 0.8 4 1
250 W 12 12 1 5 1
250 W 16 16 1 5 1
250 W 14 1 - 4 0.2 - 0.5 4 1
250 W 28 2 - 8 0.25 - 1 5 1
250 W 312 3 - 12 0.25 - 1 5 1
500 W 4 500 4 0.8 5 1
500 W 6 6 0.8 5 1
500 W 8 8 1 5 1
500 W 12 12 1.4 5 1
500 W 14 1 - 4 0.25 - 1 5 1
500 W 28 2 - 8 0.4 - 1.8 7 1
1000 W 4 1000 4 1 7 1
1000 W 6 6 1.6 7 1
1000 W 8 8 2 10 1
1000 W 14 1 - 4 0.4 - 1.8 7 1
1000 W 28 2 - 8 0.5 - 2 10 1
1500 W 4 1500 4 2 10 2
1500 W 8 8 2 10 2
1500 W 14 1 - 4 0.5 - 2 10 2
1500 W 28 2 - 8 0.7 - 3 11 2
2000 W 4 2000 4 2 10 2
2000 W 14 1 - 4 0.5 - 2 10 2

Mounting Options

 

Type F

  

Type CS
Type F - Hook Suspension (eye)
 Type CS - Push travel
 

Type CE

  

Type CM
Type CE - Powered Travel
 Type CM - Geared Travel

Dimensions

Type F - CS Dimensions and Technical Specifications

Dimensions

Model Capacity (kg) Speed m/min Kw Pull of chain Ø chain Dimensions (mm) Weight (kg)
A B B1 C1 C2 C3 C4 D D1 E F G H I L M N R S T U Ø wheel F
 CS
125W5 125 5 0.5 1 4mm 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
125W8 8 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
125W12 14 1 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
125W14 1 - 4 0.2 - 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
125W28 2 - 8 0.2 - 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
125W312 3.5 - 14 0.2 - 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
250W5 250 5 0.5 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
250W8 8 0.8 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
250W12 12 1 5mm 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
250W16 16 1 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 29 35
250W14 1 - 4 0.2 - 0.5 4mm 355 255 70 130 225 200 435 175 38 110 12 31 8 196 100 348 65 50 150 14 60 50 27 33
250W28 2 - 8 0.25 - 1 365 255 70 130 225 200 460 185 38 110 1 31 8 196 100 358 65 50 150 14 60 50 35 35
250W312 3 - 12 0.25 - 1 5mm 400 255 70 130 225 200 490 185 38 110 12 31 8 196 100 358 65 50 150 14 60 50 35 41
500W4 500 4 0.8 370 255 70 130 225 200 435 175 38 110 12 31 8 196 100 370 65 50 150 14 60 50 29 35
500W6 6 0.8 370 255 70 130 225 200 435 175 38 110 12 31 8 196 100 370 65 50 150 14 60 50 29 35
500W8 8 1 380 255 70 130 235 200 460 185 38 110 12 31 8 196 100 380 65 50 150 14 60 50 35 41
500W12 12 1.5 380 255 70 116 235 200 460 185 38 110 12 31 8 196 100 380 65 50 150 14 60 50 35 41
500W14 1 - 4 0.25 - 1 380 255 70 116 235 200 460 185 38 110 12 31 8 196 100 380 65 50 150 14 60 50 35 41
500W28 2 - 8 0.4 - 0.8 7mm 410 275 75 116 260 230 490 200 58 125 18 36 12 290 162 430 73 70 200 18 90 70 44 57
1000W4 1000 4 1 435 275 75 116 240 230 475 190 58 125 18 36 12 290 162 440 73 70 200 18 90 70 41 54
1000W6 6 1.6 445 275 75 116 260 230 490 200 58 125 18 36 12 290 162 440 73 70 200 18 90 70 44 57
1000W14 1 - 4 0.4 - 1.8 445 275 75 116 260 230 490 200 58 125 18 36 12 290 162 440 73 70 200 18 90 70 44 57
1000W8 8 2 10mm 520 315 90 185 275 235 510 245 62 135 40 41 15 290 162 505 92 70 320 22 90 70 67 83
1000W28 2 - 8 0.5 - 2.0 520 315 90 185 290 235 525 245 62 135 40 41 15 290 162 505 92 70 320 22 90 70 69 85
1500W4 1500 4 2 2 618 315 90 185 275 235 510 245 62 135 40 41 15 290 162 595 92 70 320 2 90 70 82 98
1500W14 1 - 4 0.5 - 2 618 315 90 185 290 235 528 245 62 135 40 41 15 290 162 595 92 70 320 22 90 70 87 102
2000W4 2000 4 2 618 315 90 185 275 235 510 245 62 135 40 41 15 290 162 595 92 70 200 22 90 70 82 98
2000W14 1 - 4 0.5 - 2 618 315 90 185 290 235 525 245 62 150 40 41 15 290 162 595 92 70 200 22 90 70 87 102

Type CE - CM Dimensions and Technical Specifications

Dimensions

Model Capacity (kg) Speed m/min Kw Pull of chain Ø chain
 Dimensions (mm) Weight (kg)
C1 C2 C3 D H I L M N O P R S T V Ø wheel CE CM
125W5 125  5 0.5
 1
 4mm
 130
 235
 200
 175
 8
 290
158
 375
 65
 265
 15
 65
 150
 14
 88
 65
 57
 43
125W8  8 0.5
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
125W12  14 1
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
125W14  1 - 4
 0.2 - 0.5
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
125W28  2 - 8
 0.2 - 0.5 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
125W312  3.5 - 14
 0.2 - 0.5 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W5 250 5 0.5
 130
 235
 200 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
250W8 8 0.8
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
250W12 12 1
 5mm
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W16 16 1
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W14 1 - 4
 0.2 - 0.5
 4mm
 130
 235
 200
 175
 8
 158
 375
 65
 265
 145
 65
 150
 14
 88
 65
 57
 43
250W28 2 - 8
 0.25 - 1
 130
 235
 200
 175
 8
 158
 385
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
250W312 3 - 12
 0.25 - 1
 5mm
 130
 235
 200
 175
 8
 158
 385
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W4 500 4 0.8
 130
 235
 200
 175
 8
 158
 390
 65
 265
 145
 65
 150
 14
 88
 65
 5
 45
500W6 6 0.8
 130
 235
 200
 175
 8
 158
 390
 65
 265
 145
 65
 150
 14
 88
 65
 59
 45
500W8 8 1
 130
 235
 200
 185
 8
 158
 400
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W12 12 1.5
 116
 235
 200
 185
 12
 158
 400
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W14 1 - 4
 0.25 - 1
 116
 235
 200
 185
 12
 158
 400
 65
 265
 145
 65
 150
 14
 88
 65
 65
 51
500W28 2 - 8
 0.4 - 1.8
 7mm
 116
 260
 230
 200
 12
 162
 405
 73
 265
 145
 70
 200
 18
 90
 70
 74
 60
1000W4 1000 4 1
 116
 240
 230
 190
 12
 162
 430
 73
 265
 145
 70
 200
 18
 90
 70
 71
 57
1000W6 6 1.6
 116
 260
 230
 200
 12
 162
 440
 73
 265
 145
 70
 200
 18
 90
 70
 74
 60
1000W14 1 - 4
 0.4 - 1.8
 116
 260
 230
 200
 12
 162
 440
 73
 268
 145
 70
 200
 18
 90
 70
 74
 61
1000W8 8 2
 10mm
 185
 275
 235
 245
 12
 162
 505
 92
 268
 148
 70
 320
 22
 90
 70
 98
 86
1000W28 2 - 8
 0.5 - 2
 185 290
 235
 245
 12
 162
 505
 92
 268
 148
 70
 320
 22
 90
 70
 102
 88
1500W4 1500 4
 2
 2
 185
 275
 235
 245
 12
 162
 595
 92
 268
 148
 70
 320
 22
 90
 70
 114
 103
1500W14 1 - 4
 0.5 - 2
 185
 290
 235
 245
 12
 162
 595
 92
 268
 148
 70
 320
 22
 90
 70
 117
 107
2000W4 2000 4
 2
 185
 275
 235
 245
 12
 162
 595
 92
 268
 148
 70
 200
 22
 90
 70
 114
 103
2000W14 1 - 4
 0.5 - 2
 185
 290
 235
 245
 12
 162
 595
 92
 268
 148
 70
 200
 22
 90
 70
 117
 107
RWM ING.2009.pdf

Sales Brochure

Full details of RWM hoists including dimensional drawings with full specifications.
(approx. 2.3Mb)

Pricing

Hoist Suspension Options
Capacity
Model
Height of Lift (m)
(min:3) (3 included in price)
Quantity
Unit Price Quote Only  
Add to Quote Request
Contact Us About This Product

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

I accept Find out more
Top