Crosby 'IPU10H' & 'IP10H' Vertical Materials Clamp for Extra Hard Surfaces, WLL Range from 500kg to 3000kg

IP10/H and IPU10/H vertical lifting clamps are suitable for the lifting, turning (180°) and vertical transfer of steel plates and sections with extra hard surface hardness.

• These Lifting Clamps are suitable for the lifting of materials with a surface hardness up to max. 47 Rc (450HB).
• These lifting clamps are fitted with a cam segment and a pivot made of extra hard wear-resistant material.

Available in two versions:

1. IPU10/H: Fitted with a hinged hoisting eye moving in all directions.
Further specification: see model IPU10.
For a correct use of the clamp, see fig 2 & 3.

2. IP10/H: Fitted with a fixed hoisting eye.
Further specifications: see model IP10.
For correct use of the clamp, see fig. 4 & 5

• Higher WLL and different jaw-aperatures upon request
• The minimum working load must be at least 10% of the rated WLL.
• Before using the clamp always read the instruction manual supplied with the clamp

Metric Dimensions & Specifications