
- Lifting Equipment
-
Height Safety
Height Safety Equipment
- Material Handling & Jacking Equipment
- Shop by Brand
- Clearance
-
Contact
Get In Touch
- Home/
- Lifting Equipment/
- Specialist Lifting Equipment/
- Entertainment Industry Lifting Products/
- GIS "LP D8+" Entertainment Electric Chain Hoists, for General Rigging Purposes to D8+ Guidelines, Range 125kg to 1000kg
High integrity hoists prepared for incorporation into D8+ hoisting systems to enable hoists to be used with the capability of holding loads at rest above people without using a secondary safety component, to accepted standards and codes of practice.
These hoists allow the following (when people are below the load): Load holding when loads are static.
The hoists do not allow (when people are below the load): Assembly/disassembly during set up Staging processes involving movement.
- Modern, quiet, reliable and proven design, manufacture and assembly mean long life and competitive pricing.
- Lightweight hoists, with the smallest model weighing only 13kg.
- Lifting capacities from 125 to 1000kg on 1 chain fall.
- 2 independent spring loaded brakes.
- Direct control or low voltage control – With upper/lower geared electrical limit switches.
- Contactor control - no electronics.
- Clutch overload device mounted outside the drive train; in the event of clutch problems, the load is not compromised.
- Can be used upright - motor up or climbing - motor down.
- Aluminium body - black electrophoretic coated.
- Eye body suspension is standard, hook suspension and locking chain hooks on request.
- Available for 400V, 3Ph, or 220V, 1Ph power, others on request.
- Designed with higher lifting capacities at D8PLUS with higher duty and longer lifetime hours.
- IP65 Protection class - weather resistant, the moisture sensitive components are housed separately and sealed.
- NEW Profile (square) steel lifting chain carries heavier loads with lower wear, black phosphate protection with high corrosion resistance and increased service life.
- Polygon connections on shafts and hubs - easier maintenance.
- Simple, reliable, easy to use and maintain.
Options
- Extra features allow the hoist to conform to higher safety standards with order or when later modified.
- Options include standard and ultimate limit switches, load sensing suspensions or encoders for positional feedback.
- Hoists for single phase power.
- Locking hooks.
- Flight cases.
- Other features on request, ask our sales team for details.
- Custom cable tails to meet most control systems.
D8+ Requirements Include
- Second brake.
- De-rating of the lifting capacity to give an increased safety factor of at least 8:1 safety coefficient of the load bearing material, according to DIN56950-1, 2012.
- Clutch overload device is mounted outside the drive train; In the event of clutch problems, the load is not compromised
Specifications
Hoist type | Lifting capacity | Nominal lifting speed | No. of chain falls | Motor power | Power consumption loaded | Chain dimensions | Sound pressure level in hall at 1m distance | Chain safety factor | Protection class | Weight hoist only | Weight per metre lift |
(kg) | (m/min) | (kW) | (A) | (mm) | dB | (kg) | (kg) | ||||
LPM250/1NL. D8+ | 250 | 4 | 1 | 0.25 | 1.8 | 3.75 x 10.75 | 65 | 8 | IP65 | 13 | 0.34 |
LPM250/1SL. D8+ | 125 | 8 | 1 | 0.25 | 1.8 | 3.75 x 10.75 | 65 | 8 | IP65 | 13 | 0.34 |
LP500/1NL. D8+ | 500 | 4 | 1 | 0.55 | 1.8 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/1N. D8+ | 500 | 8 | 1 | 0.72 | 2.8 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/1NF. D8+ | 500 | 43504 | 1 | 0.72/0.18 | 2.8/1.7 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/2N. D8+ | 1000 | 4 | 2 | 0.72 | 2.8 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/2NF. D8+ | 1000 | 43469 | 2 | 0.72/0.18 | 2.8/1.7 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP1000/1NL.D8+ | 1000 | 4 | 1 | 1.5 | 3.6 | 7.45 x 23 | 75 | 8 | IP65 | 47 | 1.37 |
LP1000/1N.D8+ | 1000 | 8 | 1 | 2.3 | 6.5 | 7.45 x 23 | 75 | 8 | IP65 | 51 | 1.37 |
LP1000/1NF.D8+ | 1000 | 43504 | 1 | 2.30/0.68 | 5.7/4.1 | 7.45 x 23 | 75 | 8 | IP65 | 51 | 1.37 |
Dimensions
Type | Number of falls | A1 | B1 | B2 | C1 | C2 | H1 |
LPM250 / D8 / D8+ | 1 | 205 | 389 | 20 | 133 | 96 | 394 |
LP500 / D8 / D8+ | 1 | 293 | 414 | 24 | 160 | 132 | 516 |
LP1000 / D8 / D8+ | 1 | 374 | 514 | 28 | 212 | 133 | 619 |
Dimensions of 2 fall hoists on demand
Drawings available on request
Pricing
High integrity hoists prepared for incorporation into D8+ hoisting systems to enable hoists to be used with the capability of holding loads at rest above people without using a secondary safety component, to accepted standards and codes of practice.
These hoists allow the following (when people are below the load): Load holding when loads are static.
The hoists do not allow (when people are below the load): Assembly/disassembly during set up Staging processes involving movement.
- Modern, quiet, reliable and proven design, manufacture and assembly mean long life and competitive pricing.
- Lightweight hoists, with the smallest model weighing only 13kg.
- Lifting capacities from 125 to 1000kg on 1 chain fall.
- 2 independent spring loaded brakes.
- Direct control or low voltage control – With upper/lower geared electrical limit switches.
- Contactor control - no electronics.
- Clutch overload device mounted outside the drive train; in the event of clutch problems, the load is not compromised.
- Can be used upright - motor up or climbing - motor down.
- Aluminium body - black electrophoretic coated.
- Eye body suspension is standard, hook suspension and locking chain hooks on request.
- Available for 400V, 3Ph, or 220V, 1Ph power, others on request.
- Designed with higher lifting capacities at D8PLUS with higher duty and longer lifetime hours.
- IP65 Protection class - weather resistant, the moisture sensitive components are housed separately and sealed.
- NEW Profile (square) steel lifting chain carries heavier loads with lower wear, black phosphate protection with high corrosion resistance and increased service life.
- Polygon connections on shafts and hubs - easier maintenance.
- Simple, reliable, easy to use and maintain.
Options
- Extra features allow the hoist to conform to higher safety standards with order or when later modified.
- Options include standard and ultimate limit switches, load sensing suspensions or encoders for positional feedback.
- Hoists for single phase power.
- Locking hooks.
- Flight cases.
- Other features on request, ask our sales team for details.
- Custom cable tails to meet most control systems.
D8+ Requirements Include
- Second brake.
- De-rating of the lifting capacity to give an increased safety factor of at least 8:1 safety coefficient of the load bearing material, according to DIN56950-1, 2012.
- Clutch overload device is mounted outside the drive train; In the event of clutch problems, the load is not compromised
Specifications
Hoist type | Lifting capacity | Nominal lifting speed | No. of chain falls | Motor power | Power consumption loaded | Chain dimensions | Sound pressure level in hall at 1m distance | Chain safety factor | Protection class | Weight hoist only | Weight per metre lift |
(kg) | (m/min) | (kW) | (A) | (mm) | dB | (kg) | (kg) | ||||
LPM250/1NL. D8+ | 250 | 4 | 1 | 0.25 | 1.8 | 3.75 x 10.75 | 65 | 8 | IP65 | 13 | 0.34 |
LPM250/1SL. D8+ | 125 | 8 | 1 | 0.25 | 1.8 | 3.75 x 10.75 | 65 | 8 | IP65 | 13 | 0.34 |
LP500/1NL. D8+ | 500 | 4 | 1 | 0.55 | 1.8 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/1N. D8+ | 500 | 8 | 1 | 0.72 | 2.8 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/1NF. D8+ | 500 | 43504 | 1 | 0.72/0.18 | 2.8/1.7 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/2N. D8+ | 1000 | 4 | 2 | 0.72 | 2.8 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP500/2NF. D8+ | 1000 | 43469 | 2 | 0.72/0.18 | 2.8/1.7 | 5.25 x 15 | 65 | 8 | IP65 | 23 | 0.69 |
LP1000/1NL.D8+ | 1000 | 4 | 1 | 1.5 | 3.6 | 7.45 x 23 | 75 | 8 | IP65 | 47 | 1.37 |
LP1000/1N.D8+ | 1000 | 8 | 1 | 2.3 | 6.5 | 7.45 x 23 | 75 | 8 | IP65 | 51 | 1.37 |
LP1000/1NF.D8+ | 1000 | 43504 | 1 | 2.30/0.68 | 5.7/4.1 | 7.45 x 23 | 75 | 8 | IP65 | 51 | 1.37 |
Dimensions
Type | Number of falls | A1 | B1 | B2 | C1 | C2 | H1 |
LPM250 / D8 / D8+ | 1 | 205 | 389 | 20 | 133 | 96 | 394 |
LP500 / D8 / D8+ | 1 | 293 | 414 | 24 | 160 | 132 | 516 |
LP1000 / D8 / D8+ | 1 | 374 | 514 | 28 | 212 | 133 | 619 |
Dimensions of 2 fall hoists on demand
Drawings available on request
You May Also Like
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.