Crosby G401 Forged Chain Swivel - Range from 390kg to 3270kg
Crosby Forged Chain Swivel with round eye and oval eye.
Our Crosby G401 Forged Chain Swivel is hot dip Galvanizedand quenched & Temperedas standard. All Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
- Meets the performance requirements of Federal Specification RR-C-271D, Type VII, Class 1, except for those provisions required of the contractor.
Metric Table
| Size (mm) | G-401 Stock No. | Working Load Limit (t)* | Weight Each (kg) | Dimensions (mm) | |||||||||||
| A | B | C | D | E | G | J | M | R | U | V | |||||
| 6 | 1016233 | .39 | .06 | 31.8 | 17.5 | 19.1 | 15.7 | 28.4 | 6.35 | 17.5 | 7.85 | 57.0 | 42.9 | 31.8 | |
| 8 | 1016251 | .57 | .11 | 41.4 | 20.6 | 25.4 | 19.1 | 35.1 | 7.85 | 20.6 | 9.65 | 69.0 | 52.5 | 37.3 | |
| 10 | 1016279 | 1.02 | .24 | 51.0 | 23.9 | 31.8 | 25.4 | 44.5 | 9.65 | 25.4 | 12.7 | 87.5 | 63.5 | 47.8 | |
| 13 | 1016297 | 1.63 | .51 | 63.5 | 33.3 | 38.1 | 31.8 | 57.0 | 12.7 | 33.3 | 16.0 | 108 | 81.0 | 62.0 | |
| 16 | 1016313 | 2.36 | .95 | 76.2 | 39.6 | 44.5 | 38.1 | 70.0 | 15.8 | 38.1 | 19.1 | 130 | 98.5 | 74.5 | |
| 19 | 1016331 | 3.27 | 1.40 | 89.0 | 44.5 | 51.0 | 44.5 | 82.5 | 19.1 | 47.8 | 22.4 | 147 | 125 | 88.0 | |
Imperial Table
| Size ( in.) |
G-401 Stock No. Galv. |
Working Load Limit * (lbs.) |
Weight Each (lbs.) |
Dimensions | ||||||||||
| A | B | C | D | E | G | J | M | R | U | V | ||||
| 1/4 | 1016233 | 850 | .13 | 1.25 | .69 | .75 | .62 | 1.12 | .25 | .69 | .31 | 2.25 | 1.69 | 1.25 |
| 5/16 | 1016251 | 1250 | .25 | 1.63 | .81 | 1.00 | .75 | 1.38 | .31 | .81 | .38 | 2.72 | 2.06 | 1.47 |
| 3/8 | 1016279 | 2500 | .54 | 2.00 | .94 | 1.25 | 1.00 | 1.75 | .38 | 1.00 | .50 | 3.44 | 2.50 | 1.88 |
| 1/2 | 1016297 | 3600 | 1.12 | 2.50 | 1.31 | 1.50 | 1.25 | 2.25 | .50 | 1.31 | .63 | 4.25 | 3.19 | 2.44 |
| 5/8 | 1016313 | 5200 | 2.09 | 3.00 | 1.56 | 1.75 | 1.50 | 2.75 | .62 | 1.50 | .75 | 5.13 | 3.88 | 2.94 |
| 3/4 | 1016331 | 7200 | 3.09 | 3.50 | 1.75 | 2.00 | 1.75 | 3.25 | .75 | 1.88 | .88 | 5.78 | 4.94 | 3.46 |
* Ultimate Load is 5 times the Working Load Limit.
As advertised in Crosby General Catalogue 2009 Page 115, and previously in Crosby General Catalogue 2006 Page 110.
| Please Note |
|---|
|
401, 402, and 403 swivels are positioning devices and are not intended to rotate under load. For load swivels see page 111-115. Use in corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000. |
