
- Lifting Equipment
-
Height Safety
Height Safety Equipment
- Material Handling & Jacking Equipment
- Shop by Brand
- Clearance
-
Contact
Get In Touch
- Home/
- Lifting Equipment/
- General Industrial Lifting Equipment/
- Lifting Eye Bolts & Nuts/
- Swivel Lifting Eye Bolts/
- Codipro Swivel Lifting Points/
- Codipro DSR Double Swivel Lifting Point
The DSR lifting ring is a double swivel ring. It is composed of a GRADUP lifting ring designed for rotations under load. Its double swivel ensures perfect alignment with the sling. The lifting ring can swivel 180° but has a rotating range of 360°. It can be used for any lifting configuration (straight lift, with angle, tilting, rotating).
The DSR lifting ring is equipped with a protective crossbar and is approved for all lifting configurations from 0° to 90°. The DSR is designed for use in a temperature range from -20°c to +200°c and carries various markings, including CE, WLL and tightening torque. It is manufactured in compliance with the REACH regulation and is also available as female and stainless-steel, quick lift and welding version.
All DSR models have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.
The DSR model is available in either male or female versions (FE.DSR).
Features
- GRADUP steel ring
- Swivelling under load
- 360° rotation
- 180° articulation
- Safety factor of 5:1 and Safety factor of 4:1
- Zinc-coating
- Control anti-crack on 100% of products
- Fatigue test
- Two ways of tightening
- Individual traceability number
- Other variants available on request
- Each ring is accompanied with use recommendations
- Delivered with a certificate of compliance
- Complies with the Machinery Directive 2006/42/CE
- Tested to EN 1677-1
- Other non-standard variants are available on request. To name some (See below for more details) examples of the customisations available; longer length bolts (L1 dimension), custom thread forms (Metric fine, UNF, UNJ, BSPP, BSF, BSW, 8UN etc. - Any thread form is possible), with flat or angular spacers (often seen in aerospace wind-farm technology), or to suit oversized threaded holes (e.g. if only M24 is required to achieve the desired WLL, but the hole is pre-threaded to M60, a threaded 'bell type' conversion spacer/adapter is a possibility - a far more cost effective solution).
- Made in Luxembourg.
- 7 Year manufacturer's warranty
Dimensions & Specifications: Metric Threads
Reference |
Diameter |
SF 5:1 WLL (t) |
SF 4:1 WLL (t) |
Standard L1 (mm) |
Torque (Nm) |
S1 (mm) |
S2 (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
Weight (kg) |
DSR M 5 UP | M 5 (x0,8) | 0,07 | 0,10 | 15 | 3 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 6 UP | M 6 (x1) | 0,15 | 0,20 | 15 | 4 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 8 UP | M 8 (x1,25) | 0,40 | 0,50 | 15 | 6 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 10 UP | M 10 (x1,5) | 0,70 | 0,90 | 18 | 10 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 12 UP | M 12 (x1,75) | 1,05 | 1,30 | 21 | 15 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 14 UP | M 14 (x2) | 1,40 | 1,80 | 23 | 30 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 16 UP | M 16 (x2) | 2,00 | 2,30 | 27 | 50 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 18 UP | M 18 (x2,5) | 2,30 | 2,30 | 27 | 70 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 20 2t5 UP | M 20 (x2,5) | 2,50 | 2,50 | 30 | 100 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 20 3t2 UP | M 20 (x2,5) | 2,90 | 3,20 | 25 | 100 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR M 22 UP | M 22 (x2,5) | 3,50 | 4,50 | 33 | 120 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR M 24 UP | M 24 (x3) | 4,40 | 5,50 | 36 | 160 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR M 27 UP | M 27 (x3) | 5,70 | 6,00 | 40 | 200 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,7 |
DSR M 30 6t3 UP | M 30 (x3,5) | 6,00 | 6,30 | 45 | 250 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,7 |
DSR M 30 8t UP | M 30 (x3,5) | 6,70 | 8,00 | 45 | 250 | 14 | 30 | 80 | 77 | 78 | 98 | 71 | 26 | 141 | 28 | 5,4 |
DSR M 36 UP | M 36 (x4) | 8,00 | 8,50 | 54 | 320 | 14 | 30 | 80 | 77 | 78 | 98 | 71 | 26 | 141 | 28 | 5,4 |
DSR M 42 UP | M 42 (x4,5) | 8,50 | 9,00 | 63 | 400 | 14 | 30 | 80 | 77 | 78 | 98 | 71 | 26 | 141 | 28 | 5,5 |

Dimensions & Specifications: UNC Threads
Reference |
Diameter |
SF 5:1 WLL (lbs) |
SF 4:1 WLL (lbs) |
Standard L1 (mm) |
Torque (Nm) |
S1 (mm) |
S2 (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
Weight (kg) |
DSR U 025 UP | UNC 1/4’’-20 | 330 | 450 | 13 | 3 | 8 | 16 | 32 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 516 UP | UNC 5/16’’-18 | 1,000 | 1200 | 15 | 5 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 038 UP | UNC 3/8"-16 | 1300 | 1600 | 17 | 8 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 050 UP | UNC 1/2"-13 | 2400 | 2800 | 21 | 12 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 058 UP | UNC 5/8"-11 | 3900 | 4900 | 27 | 40 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR U 075 UP | UNC 3/4"-10 | 5250 | 5250 | 30 | 80 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR U 078 UP | UNC 7/8"-9 | 7,900 | 9800 | 33 | 90 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,5 |
DSR U 100 UP | UNC 1"-8 | 11200 | 12500 | 36 | 125 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR U 118 UP | UNC 1" 1/8-7 | 11500 | 13,000 | 42 | 160 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR U 125 UP | UNC 1" 1/4-7 | 13500 | 13500 | 45 | 200 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,7 |

Examples of the Customisations Possible
Specific Threads
CODIPRO manufactures specific threads: metric, round, non-metric or gas cylindrical, in millimetres or inches, with a fine or regular thread.
- These threads can be made in a short time.
- See downloads for the more common threads.
- All thread forms are possible.
Angular Spacers
Typically seen more commonly in the aerospace or wind technology industry where spacers can be designed for nonparallel mating surfaces, whilst maintaining the correct angle of the bolt.
- Each is designed to fit purpose designed lifts.
- Can be a quickly designed solution.
For Oversized Through Hole (Unthreaded)
The double centering system allows to fix the lifting ring through a smooth hole (bore) and to guarantee a perfect stability of the ring with the part to be lifted.
- No oversizing
- Protected threading
- Increased shear strength of the bolt
- Delivered with nut
Oversized Existing Threaded Hole
The use of a bell type lifting ring is similar to that of female rings. However, the bell type lifting ring is specially designed for a threaded hole with a large diameter and a small load to lift.
- Available for all types of threads
- No oversizing (over-speccing) of the lifting ring
With Spacer to Move Lifting Point Away from Load
A lifting ring with a spacer is the ideal solution when the geometry of the part to be lifted prevents the shackle from moving properly.
- Some standard sizes are available. See downloads.
- Customized spacer available on request
- Available on all the CODIPRO range
Specific Colour or Surface Treatment
CODIPRO adapts to the customer’s request and offers different types of surface treatment. On request and by specifying the color code, it is possible to offer a different shackle color.
- Available surface treatments: black/white zinc plating – yellow bichromate zinc plating – specific paint – nickel plating
- Other surface treatments available on request
Specific Engraving
Each CODIPRO lifting ring is engraved with the individual traceability number, the WLL and the tightening torque. In addition, CODIPRO can produce customized engravings according to the customer’s specific requirements.
- Laser engraving
- Available for the entire CODIPRO range
- ALITAG (force plate) available on request
For Oversized Threaded Hole
The thread adaptor (ADA) allows the use of a lifting ring with a smaller model than the customer’s thread.
- Non oversized ring
- See downloads for the standard threads available
- Specific adaptor available on request
- Ring can be used for 2 threads
Long or Semi-threaded Bolt
CODIPRO manufactures long bolts on request, cut to the millimetre. They can be completely threaded or semi-threaded.
- Nuts and washers available on request
- See downloads for the stocked standard long bolt lengths
How to use the Codipro DSR Lifting Ring
The CODIPRO team, always listening to the market and keeping an eye on its trends, works constantly to improve and develop its range of swivel lifting rings.
The GRADUP range has been especially developed to be the quintessential swivel lifting ring, particularly in terms of the quality of the raw materials used.
The CODIPRO research department, supported by advice from internationally renowned research centers, selected the best quality steel to achieve the best balance between tensile strength, breaking load and fatigue strength.
Each component of the GRADUP lifting rings’ hinge system has also been reviewed. The outer crowding dimensions, the screw couplings and the openings are compatible with CODIPRO lifting rings already on the market.
This major innovation, the GRADUP lifting ring, is the fruit of more than 40 years’ experience combined with in-depth research.
What are the benefits of the GRADUP range ?
- • Individually packed in a transparent, resealable pack containing the use recommendations and the certificate of compliance, each GRADUP lifting ring has an individual traceability number that is specific to CODIPRO.
- The GRADUP lifting rings are 100% compatible with lifting rings in the existing SEB, DSR, DSS ranges, etc. They are simply more effective.
- The optimization of the raw materials enables a significant improvement in WLL: up to 11% additional WLL (23% in safety factor 4).
- In keeping with its mission statement: “Our QUALITY = Your SAFETY”, CODIPRO is offering certified lifting rings stamped with the 5:1 safety factor, which means they can be used throughout the world, including in the USA. CODIPRO also provides all the information needed for use with a 4:1 safety factor, as defined under the EN 1677-1 standard.
- A lifting ring is intrinsically stronger when it is used linearly (= an angle of 0°). Under these conditions, the GRADUP lifting rings offer improved WLL, the values for which are defined in the tables at the end of the catalogue.
- An anti-corrosion coating means that the unpainted parts of the CODIPRO swivel lifting rings are resistant to salt mist spray for 600 hours.
- The tightening torque is stamped on all lifting rings in the GRADUP range.
- As a producer of lifting fittings, CODIPRO is especially concerned with the orange color (RAL 2002), which is always associated with SAFETY. This particular shade, which has been a feature of the CODIPRO brand for many years, allowing users to distinguish CODIPRO’s lifting rings from all the copies available on the market that could put operators’ lives in danger.
Grade 6, 8, 10, 12... Why GRADUP ?
The quality of the steel is the essential characteristic of a swivel lifting ring. In the world of lifting, it is normal to speak in terms of class of steel, or “grade”. This “grade” is what it’s all about for a chain, because the diameter of the chain combined with the class of the material is what gives the lifting capacity. In recent years, some “grades” that are higher than others have appeared on the market. Based on this, many manufacturers are offering lifting rings of class 10, 12, 14, etc. These descriptions are not relevant for lifting devices with multiple components, such as a swivel lifting ring. This is why CODIPRO is seeking to move away from this trend that is almost entirely based on marketing promotions.
By creating the GRADUP (or optimized grade) range, CODIPRO is offering a breakthrough innovation. In a swivel lifting ring with multiple components, each element is subject to different constraints. In order to offer maximum strength, each separate piece must be conceived so that the materials used and the design are the most appropriate for its function within the overall device. With the release of the GRADUP brand, CODIPRO is now offering an ultra-safe and ultra-high-performance lifting ring.
When can GRADUP be used ?
Anytime and anywhere in a traditional industrial environment: the GRADUP swivel lifting rings are designed to be used within a temperature range of -20°C to +200°C (-4°F to +392°F). Use
recommendations provided in 15 languages give a detailed description of the conditions for use.
For extreme applications such as offshore use, or very low/very high temperatures, etc., our engineers at the CODIPRO research department are available to provide details about the composition of our lifting rings: strength, chemical composition, mechanical strength, tensile strength, etc.
What certifications have been given to the GRADUP range ?
All CODIPRO swivel lifting rings comply strictly with the points in the Machinery Directive 2006/42/CE.
The EN 1677-1 standard (January 2009) applicable to “forged steel components of Grade 8” is restrictive with regard to the quality of the steel that can be used. With its innovative GRADUP range, CODIPRO has gone further, using higher-performance steels. CODIPRO has committed to complying with the essential points of the EN 1677-1 standard: the way in
which the components must be produced, tested and certified.
All lifting rings in the GRADUP range also comply with the ASME B30.26-2010 standard. They can be used in the USA with no specific safety measures.

Codipro DSR User Instructions
(approx. 1.1Mb)
Codipro DSR Product Information Sheet
(approx. 0.5Mb)
Load Angle Chart
(approx. 2.1Mb)
Standard Long Thread Bolt Sizes
(approx. 0.1Mb)
Thread Chart (Common Types Available)
(approx. 0.6Mb)
Standard Spacers, DSR
(approx. 0.4Mb)
Thread Adapters
(approx. 0.5Mb)
DSR M 5 UP STEP File
(approx. 0.7Mb)
DSR M 6 UP STEP File
(approx. 0.7Mb)
DSR M 8 UP STEP File
(approx. 0.7Mb)
DSR M 10 UP STEP File
(approx. 0.7Mb)
DSR M 12 UP STEP File
(approx. 0.7Mb)
DSR M 14 UP STEP File
(approx. 0.7Mb)
DSR M 16 UP STEP File
(approx. 0.7Mb)
DSR M 18 UP STEP File
(approx. 0.7Mb)
DSR M20, 2t5 UP STEP File
(approx. 0.7Mb)
DSR M20 3t2 UP STEP File
(approx. 0.8Mb)
DSR M 22 UP STEP File
(approx. 0.7Mb)
DSR M 24 UP STEP File
(approx. 0.7Mb)
DSR M 27 UP STEP File
(approx. 0.7Mb)
DSR M 30 6t3 UP STEP File
(approx. 0.7Mb)
DSR M 30 8t UP STEP File
(approx. 0.3Mb)
DSR M 36 UP STEP File
(approx. 0.3Mb)
DSR M 42 UP STEP File
(approx. 0.3Mb)
DSR U 025 UP STEP File
(approx. 0.7Mb)
DSR U 516 UP STEP File
(approx. 0.7Mb)
DSR U 038 UP STEP File
(approx. 0.8Mb)
DSR U 050 UP STEP File
(approx. 0.7Mb)
DSR U 058 UP STEP File
(approx. 0.8Mb)
DSR U 075 UP STEP File
(approx. 0.8Mb)
DSR U 078 UP STEP File
(approx. 0.8Mb)
DSR U 100 UP STEP File
(approx. 0.8Mb)
DSR U 118 UP STEP File
(approx. 0.8Mb)
DSR U 125 UP STEP File
(approx. 0.8Mb)The DSR lifting ring is a double swivel ring. It is composed of a GRADUP lifting ring designed for rotations under load. Its double swivel ensures perfect alignment with the sling. The lifting ring can swivel 180° but has a rotating range of 360°. It can be used for any lifting configuration (straight lift, with angle, tilting, rotating).
The DSR lifting ring is equipped with a protective crossbar and is approved for all lifting configurations from 0° to 90°. The DSR is designed for use in a temperature range from -20°c to +200°c and carries various markings, including CE, WLL and tightening torque. It is manufactured in compliance with the REACH regulation and is also available as female and stainless-steel, quick lift and welding version.
All DSR models have a safety factor of 4 and 5, which means that their breaking load is four or five times greater than the capacity indicated in the technical sheet.
The DSR model is available in either male or female versions (FE.DSR).
Features
- GRADUP steel ring
- Swivelling under load
- 360° rotation
- 180° articulation
- Safety factor of 5:1 and Safety factor of 4:1
- Zinc-coating
- Control anti-crack on 100% of products
- Fatigue test
- Two ways of tightening
- Individual traceability number
- Other variants available on request
- Each ring is accompanied with use recommendations
- Delivered with a certificate of compliance
- Complies with the Machinery Directive 2006/42/CE
- Tested to EN 1677-1
- Other non-standard variants are available on request. To name some (See below for more details) examples of the customisations available; longer length bolts (L1 dimension), custom thread forms (Metric fine, UNF, UNJ, BSPP, BSF, BSW, 8UN etc. - Any thread form is possible), with flat or angular spacers (often seen in aerospace wind-farm technology), or to suit oversized threaded holes (e.g. if only M24 is required to achieve the desired WLL, but the hole is pre-threaded to M60, a threaded 'bell type' conversion spacer/adapter is a possibility - a far more cost effective solution).
- Made in Luxembourg.
- 7 Year manufacturer's warranty
Dimensions & Specifications: Metric Threads
Reference |
Diameter |
SF 5:1 WLL (t) |
SF 4:1 WLL (t) |
Standard L1 (mm) |
Torque (Nm) |
S1 (mm) |
S2 (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
Weight (kg) |
DSR M 5 UP | M 5 (x0,8) | 0,07 | 0,10 | 15 | 3 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 6 UP | M 6 (x1) | 0,15 | 0,20 | 15 | 4 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 8 UP | M 8 (x1,25) | 0,40 | 0,50 | 15 | 6 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 10 UP | M 10 (x1,5) | 0,70 | 0,90 | 18 | 10 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 12 UP | M 12 (x1,75) | 1,05 | 1,30 | 21 | 15 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR M 14 UP | M 14 (x2) | 1,40 | 1,80 | 23 | 30 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 16 UP | M 16 (x2) | 2,00 | 2,30 | 27 | 50 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 18 UP | M 18 (x2,5) | 2,30 | 2,30 | 27 | 70 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 20 2t5 UP | M 20 (x2,5) | 2,50 | 2,50 | 30 | 100 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR M 20 3t2 UP | M 20 (x2,5) | 2,90 | 3,20 | 25 | 100 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR M 22 UP | M 22 (x2,5) | 3,50 | 4,50 | 33 | 120 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR M 24 UP | M 24 (x3) | 4,40 | 5,50 | 36 | 160 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR M 27 UP | M 27 (x3) | 5,70 | 6,00 | 40 | 200 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,7 |
DSR M 30 6t3 UP | M 30 (x3,5) | 6,00 | 6,30 | 45 | 250 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,7 |
DSR M 30 8t UP | M 30 (x3,5) | 6,70 | 8,00 | 45 | 250 | 14 | 30 | 80 | 77 | 78 | 98 | 71 | 26 | 141 | 28 | 5,4 |
DSR M 36 UP | M 36 (x4) | 8,00 | 8,50 | 54 | 320 | 14 | 30 | 80 | 77 | 78 | 98 | 71 | 26 | 141 | 28 | 5,4 |
DSR M 42 UP | M 42 (x4,5) | 8,50 | 9,00 | 63 | 400 | 14 | 30 | 80 | 77 | 78 | 98 | 71 | 26 | 141 | 28 | 5,5 |

Dimensions & Specifications: UNC Threads
Reference |
Diameter |
SF 5:1 WLL (lbs) |
SF 4:1 WLL (lbs) |
Standard L1 (mm) |
Torque (Nm) |
S1 (mm) |
S2 (mm) |
A (mm) |
B (mm) |
C (mm) |
D (mm) |
E (mm) |
F (mm) |
G (mm) |
H (mm) |
Weight (kg) |
DSR U 025 UP | UNC 1/4’’-20 | 330 | 450 | 13 | 3 | 8 | 16 | 32 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 516 UP | UNC 5/16’’-18 | 1,000 | 1200 | 15 | 5 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 038 UP | UNC 3/8"-16 | 1300 | 1600 | 17 | 8 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 050 UP | UNC 1/2"-13 | 2400 | 2800 | 21 | 12 | 8 | 16 | 33 | 30 | 30 | 38 | 27 | 14 | 53 | 9,5 | 0,3 |
DSR U 058 UP | UNC 5/8"-11 | 3900 | 4900 | 27 | 40 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR U 075 UP | UNC 3/4"-10 | 5250 | 5250 | 30 | 80 | 8 | 20 | 45 | 40 | 45 | 53 | 38 | 17 | 76 | 13 | 0,9 |
DSR U 078 UP | UNC 7/8"-9 | 7,900 | 9800 | 33 | 90 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,5 |
DSR U 100 UP | UNC 1"-8 | 11200 | 12500 | 36 | 125 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR U 118 UP | UNC 1" 1/8-7 | 11500 | 13,000 | 42 | 160 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,6 |
DSR U 125 UP | UNC 1" 1/4-7 | 13500 | 13500 | 45 | 200 | 14 | 24 | 62 | 55 | 60 | 83 | 55 | 25 | 115 | 19 | 2,7 |

Examples of the Customisations Possible
Specific Threads
CODIPRO manufactures specific threads: metric, round, non-metric or gas cylindrical, in millimetres or inches, with a fine or regular thread.
- These threads can be made in a short time.
- See downloads for the more common threads.
- All thread forms are possible.
Angular Spacers
Typically seen more commonly in the aerospace or wind technology industry where spacers can be designed for nonparallel mating surfaces, whilst maintaining the correct angle of the bolt.
- Each is designed to fit purpose designed lifts.
- Can be a quickly designed solution.
For Oversized Through Hole (Unthreaded)
The double centering system allows to fix the lifting ring through a smooth hole (bore) and to guarantee a perfect stability of the ring with the part to be lifted.
- No oversizing
- Protected threading
- Increased shear strength of the bolt
- Delivered with nut
Oversized Existing Threaded Hole
The use of a bell type lifting ring is similar to that of female rings. However, the bell type lifting ring is specially designed for a threaded hole with a large diameter and a small load to lift.
- Available for all types of threads
- No oversizing (over-speccing) of the lifting ring
With Spacer to Move Lifting Point Away from Load
A lifting ring with a spacer is the ideal solution when the geometry of the part to be lifted prevents the shackle from moving properly.
- Some standard sizes are available. See downloads.
- Customized spacer available on request
- Available on all the CODIPRO range
Specific Colour or Surface Treatment
CODIPRO adapts to the customer’s request and offers different types of surface treatment. On request and by specifying the color code, it is possible to offer a different shackle color.
- Available surface treatments: black/white zinc plating – yellow bichromate zinc plating – specific paint – nickel plating
- Other surface treatments available on request
Specific Engraving
Each CODIPRO lifting ring is engraved with the individual traceability number, the WLL and the tightening torque. In addition, CODIPRO can produce customized engravings according to the customer’s specific requirements.
- Laser engraving
- Available for the entire CODIPRO range
- ALITAG (force plate) available on request
For Oversized Threaded Hole
The thread adaptor (ADA) allows the use of a lifting ring with a smaller model than the customer’s thread.
- Non oversized ring
- See downloads for the standard threads available
- Specific adaptor available on request
- Ring can be used for 2 threads
Long or Semi-threaded Bolt
CODIPRO manufactures long bolts on request, cut to the millimetre. They can be completely threaded or semi-threaded.
- Nuts and washers available on request
- See downloads for the stocked standard long bolt lengths
How to use the Codipro DSR Lifting Ring
The CODIPRO team, always listening to the market and keeping an eye on its trends, works constantly to improve and develop its range of swivel lifting rings.
The GRADUP range has been especially developed to be the quintessential swivel lifting ring, particularly in terms of the quality of the raw materials used.
The CODIPRO research department, supported by advice from internationally renowned research centers, selected the best quality steel to achieve the best balance between tensile strength, breaking load and fatigue strength.
Each component of the GRADUP lifting rings’ hinge system has also been reviewed. The outer crowding dimensions, the screw couplings and the openings are compatible with CODIPRO lifting rings already on the market.
This major innovation, the GRADUP lifting ring, is the fruit of more than 40 years’ experience combined with in-depth research.
What are the benefits of the GRADUP range ?
- • Individually packed in a transparent, resealable pack containing the use recommendations and the certificate of compliance, each GRADUP lifting ring has an individual traceability number that is specific to CODIPRO.
- The GRADUP lifting rings are 100% compatible with lifting rings in the existing SEB, DSR, DSS ranges, etc. They are simply more effective.
- The optimization of the raw materials enables a significant improvement in WLL: up to 11% additional WLL (23% in safety factor 4).
- In keeping with its mission statement: “Our QUALITY = Your SAFETY”, CODIPRO is offering certified lifting rings stamped with the 5:1 safety factor, which means they can be used throughout the world, including in the USA. CODIPRO also provides all the information needed for use with a 4:1 safety factor, as defined under the EN 1677-1 standard.
- A lifting ring is intrinsically stronger when it is used linearly (= an angle of 0°). Under these conditions, the GRADUP lifting rings offer improved WLL, the values for which are defined in the tables at the end of the catalogue.
- An anti-corrosion coating means that the unpainted parts of the CODIPRO swivel lifting rings are resistant to salt mist spray for 600 hours.
- The tightening torque is stamped on all lifting rings in the GRADUP range.
- As a producer of lifting fittings, CODIPRO is especially concerned with the orange color (RAL 2002), which is always associated with SAFETY. This particular shade, which has been a feature of the CODIPRO brand for many years, allowing users to distinguish CODIPRO’s lifting rings from all the copies available on the market that could put operators’ lives in danger.
Grade 6, 8, 10, 12... Why GRADUP ?
The quality of the steel is the essential characteristic of a swivel lifting ring. In the world of lifting, it is normal to speak in terms of class of steel, or “grade”. This “grade” is what it’s all about for a chain, because the diameter of the chain combined with the class of the material is what gives the lifting capacity. In recent years, some “grades” that are higher than others have appeared on the market. Based on this, many manufacturers are offering lifting rings of class 10, 12, 14, etc. These descriptions are not relevant for lifting devices with multiple components, such as a swivel lifting ring. This is why CODIPRO is seeking to move away from this trend that is almost entirely based on marketing promotions.
By creating the GRADUP (or optimized grade) range, CODIPRO is offering a breakthrough innovation. In a swivel lifting ring with multiple components, each element is subject to different constraints. In order to offer maximum strength, each separate piece must be conceived so that the materials used and the design are the most appropriate for its function within the overall device. With the release of the GRADUP brand, CODIPRO is now offering an ultra-safe and ultra-high-performance lifting ring.
When can GRADUP be used ?
Anytime and anywhere in a traditional industrial environment: the GRADUP swivel lifting rings are designed to be used within a temperature range of -20°C to +200°C (-4°F to +392°F). Use
recommendations provided in 15 languages give a detailed description of the conditions for use.
For extreme applications such as offshore use, or very low/very high temperatures, etc., our engineers at the CODIPRO research department are available to provide details about the composition of our lifting rings: strength, chemical composition, mechanical strength, tensile strength, etc.
What certifications have been given to the GRADUP range ?
All CODIPRO swivel lifting rings comply strictly with the points in the Machinery Directive 2006/42/CE.
The EN 1677-1 standard (January 2009) applicable to “forged steel components of Grade 8” is restrictive with regard to the quality of the steel that can be used. With its innovative GRADUP range, CODIPRO has gone further, using higher-performance steels. CODIPRO has committed to complying with the essential points of the EN 1677-1 standard: the way in
which the components must be produced, tested and certified.
All lifting rings in the GRADUP range also comply with the ASME B30.26-2010 standard. They can be used in the USA with no specific safety measures.

Codipro DSR User Instructions
(approx. 1.1Mb)
Codipro DSR Product Information Sheet
(approx. 0.5Mb)
Load Angle Chart
(approx. 2.1Mb)
Standard Long Thread Bolt Sizes
(approx. 0.1Mb)
Thread Chart (Common Types Available)
(approx. 0.6Mb)
Standard Spacers, DSR
(approx. 0.4Mb)
Thread Adapters
(approx. 0.5Mb)
DSR M 5 UP STEP File
(approx. 0.7Mb)
DSR M 6 UP STEP File
(approx. 0.7Mb)
DSR M 8 UP STEP File
(approx. 0.7Mb)
DSR M 10 UP STEP File
(approx. 0.7Mb)
DSR M 12 UP STEP File
(approx. 0.7Mb)
DSR M 14 UP STEP File
(approx. 0.7Mb)
DSR M 16 UP STEP File
(approx. 0.7Mb)
DSR M 18 UP STEP File
(approx. 0.7Mb)
DSR M20, 2t5 UP STEP File
(approx. 0.7Mb)
DSR M20 3t2 UP STEP File
(approx. 0.8Mb)
DSR M 22 UP STEP File
(approx. 0.7Mb)
DSR M 24 UP STEP File
(approx. 0.7Mb)
DSR M 27 UP STEP File
(approx. 0.7Mb)
DSR M 30 6t3 UP STEP File
(approx. 0.7Mb)
DSR M 30 8t UP STEP File
(approx. 0.3Mb)
DSR M 36 UP STEP File
(approx. 0.3Mb)
DSR M 42 UP STEP File
(approx. 0.3Mb)
DSR U 025 UP STEP File
(approx. 0.7Mb)
DSR U 516 UP STEP File
(approx. 0.7Mb)
DSR U 038 UP STEP File
(approx. 0.8Mb)
DSR U 050 UP STEP File
(approx. 0.7Mb)
DSR U 058 UP STEP File
(approx. 0.8Mb)
DSR U 075 UP STEP File
(approx. 0.8Mb)
DSR U 078 UP STEP File
(approx. 0.8Mb)
DSR U 100 UP STEP File
(approx. 0.8Mb)
DSR U 118 UP STEP File
(approx. 0.8Mb)
DSR U 125 UP STEP File
(approx. 0.8Mb)You May Also Like
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.