Genesi SC6NW Davit Arm System

The Genesi SC6NW davit system is the result of careful design, making it the lightest certified 3-operator davit solution on the market.

The special aluminium alloy, anodisation and octagonal shape optimise performance and allow each of its components to be easily transported by a single person. The tie rod on the arm folds for ease of transport and offers a quick and easy means of attachment to the mast so it can be installed by a single operator.

Genesi SC6NW System Features

• Two-position adjustable arm, with outreach lengths of 310 and 570 mm.
• Comes with two attachment plates for fall arrest, recovery blocks or winches as standard. Device-specific adapter brackets that mount to attachment plates are sold separately.
• Equipped with additional anchor point
• Octagonal profile that provides increased mechanical strength
• Entirely made of anodised aluminium for lightness and protection
• Easy to install and use
• Certified for 3 operators
• Full traceability of components and documentation management with NFC tags

SC6NW Davit System Uses

• Fall arrest: Maximum of three users: each connected to one of the anchor points on the device. The fall arrest system must comply with EN 363, and the maximum force generated for arrest must be less than 6 kN
• Rescue / Evacuation: The system can be used with certified devices EN1496:2006 or EN1496:2017 class A or B, and the maximum weight of the operator and any accessories to be connected to the evacuation device is related to the EN1496:2017 device.
• Goods Lifting: The Genesi SC devices mounted on fixed supports can be used, if necessary, for material handling using a single lifting device type SOIT006M. The maximum load that can be handled is 220 kg, and after this manoeuvre, the device must be carefully inspected.

The davit system can be used with a wide range of bases, both fixed and mobile, making the system extremely versatile and adaptable to many situations.

With the Genesi SC6NW, security is guaranteed in any type of vertical access; its small dimensions and wide range of certified bases, fixed and mobile, allow this solution to be extremely versatile and adaptable to many situations.

The SC6NW system conforms to the PPE Regulation 2016/425, EN795:2012 type B and CEN/TS 16415:2013 type B for a maximum of three users.

Main Components and Spare Parts of the Genesi SC6NW System

1. Genesi SC6NW arm (118-3003-0701)
   1. Pulley assembly (118-3001-1500)
   2. Offset fall arrest system support (118-3002-1000)
   3. Universal bracket for fastening adaptors (179-0903-0001)
   4. Crane arm cap (118-3002-0800)
   5. Anchor point (118-3003-0400)
   6. Pin 110mm (661-2023-0004)
   7. Pin 140mmm (661-2023-0005)
2. Optional offset fall arrest system support (118-3002-1000)
3. Genesi SC6-PNW pole (118-3003-1200)
      h . Black handle (118-3002-1100)

a

b

c

d

e

f

g

h

Advantages

• Excellent performance
• Reduced aesthetic impact
• Adaptability to any type of roofing, even at reduced load-bearing capacity
• Tailor-made design of supports
• Ergonomics
• Lightness
• Ergonomics and ease of use
• Total speed and safety during access and retrieval
• Ease of transport, thanks to robust and lightweight materials
• Ease and speed of installation; system assembles in minutes
• Reduced footprint

Base and Support Options Compatible with the SC6NW Davit Arm System

1. Offset floor base for concrete and steel (77 mm) (GNSSC-BPD077)
2. Universal wall/floor base for all Genesi SC systems (GNSSC-BUMP73)
   *PVC adapter required, sold separately.
3. Central floor base for concrete andsteel (77 mm) (GNSSC-BPC077)
4. Wall base for concrete and steel (77 mm) (GNSSC-BMA077)
5. Immersion base for concrete (77 mm) (GNSSC-BCC077)
6. Concealed base for concrete and steel (77 mm) (GNSSC-BCF077)
7. Concealed concrete casting base (77 mm) (GNSSC-BCI077)
8. Mobile support system Y and T configuration (GENESI SCTY)

Dimensional Specifications

Minimum Extension Dimensions

Maximum Extension Dimensions