Camlok TRU Round Stock Grabs

• For lifting and handling tubes, pipes, rolls or similar round stock material quickly and safely.
• Jaws can be fitted with plastic or rubber lined pads to minimise marking of sensitive surface materials, the lining also helps prevent items slipping if the grab has not been positioned correctly.
• Fitted with a manually operated pawl that locks the grab in the open position.
• Important Note: When using protective lining, it is important that the surfaces are dry, clean and free of oil and grease.
• Designed and manufactured in the UK.

Dimensions & Specifications

All dimensional information is in metric millimetres unless otherwise stated.

Model	WLL (kg)	Pipe Dia. (mm) (Z)	A (mm)	B (mm min - max)	C (mm	D (mm)	E (mm)	F (mm)	Weight (kg)
TRU 100	100	50-150	270	292-458	97	43	8	17	3.9
TRU 500	500	35-200	503	417-723	150	56	15	17	13.6
TRU 1000	1000	35-200	509	437-745	178	82	15	30	13.6
TRU 1500	1500	80-300	720	520-937	204	84	20	25	27
TRU 3000	3000	80-300	740	582-960	220	125	20	30	49
TRU 4000	4000	200-600	1420	930-1815	318	205	30	35	204

Restrictions

The TRU must be positioned close to the centre of gravity of the load to be lifted. The working load limit of the grab should be as close as possible to the weight of the load to be lifted. The protective lining only restricts the material from slipping if the material is free from oil, grease, dirt etc.