Compressed air operation lifting and pulling winch with possible infinite height of lift. 1600kg pneumatic pulling machine weighs only 40kg.
Model:
TIRFOR TU16P
Quick Ref:
TTU-3254
More from:
Work can be performed in any position; horizontal, vertical or at an angle. There is no limit to the length of the wire rope; the capacity can be increased.
Safe and Reliable
Constant control of the load during lifting and lowering with accuracy to within one millimetre.
When stationary, the load is automatically distributed between the two jaw units.
Overload safety device.
TU range approved for lifting personnel in most countries.
Increased Capacity
Using the sheave block technique, the capacity of the TIRFOR can be increased by a factor of 2,3,4 or more (see diagrams).
The figures given must be multiplied by the nominal capacity of the device.
When calculating the working load limit, include a loss of around 4% per sheave, due to the friction of the sheaves.
If you wish to receive a quote for this product, please use the Pricing section to the right, this form is for general enquiries regarding this product only.
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Pricing
Work can be performed in any position; horizontal, vertical or at an angle. There is no limit to the length of the wire rope; the capacity can be increased.
Safe and Reliable
Constant control of the load during lifting and lowering with accuracy to within one millimetre.
When stationary, the load is automatically distributed between the two jaw units.
Overload safety device.
TU range approved for lifting personnel in most countries.
Increased Capacity
Using the sheave block technique, the capacity of the TIRFOR can be increased by a factor of 2,3,4 or more (see diagrams).
The figures given must be multiplied by the nominal capacity of the device.
When calculating the working load limit, include a loss of around 4% per sheave, due to the friction of the sheaves.
