Straightpoint SubseaLink

Subsea Load Cell from Straightpoint

Crosby Straightpoint Subsea Link (SL) is a load cell that has been manufactured for use in subsea or submersible projects where accurate load monitoring is required.

Constructed from 17-4PH stainless steel with o-ring seals and moulded SubConn connector, the SL link design ensures high integrity and will resist saltwater, temperature variations and the water pressure at varying depths of up to 2000m or 6562 feet.

At depth, the SL can be handled and rigged via an ROV, where it may be inaccessible by a diver/s or the cost may prohibit.

Output options include mV/V to the Crosby Straightpoint Handheld plus, 4-20mA or 0-10v analogue to a PLC, Datalogger or the Multi Operation Survey System (MOSS), RS485 or an integral datalogger storing up to one million readings and powered by an internal battery.

Designed to accept Crosby G2130 shackles (safety bolt type) as well as ROV shackles - additionally, there is an option for ROV mounting on the SL body itself.

SubseaLink Features

• Manufactured for use in subsea or submersible projects.
• On board data-logging option.
• Pressure tested to a depth of 2,000 m.
• SubConn connector.
• Environmental protection IP68/NEMA6P.
• Constructed from 17-4PH stainless steel.
• Designed to fit with The Crosby Group ROV shackles.
• Option for ROV mounting on the SL body itself.
• Design Factor: 5:1
• Operating Temperature: -10°C to +50°C.
• Accuracy: ±0.1% of full scale.
• Max depth of use: 2,000 m.
• Material: 17-4 PH Stainless steel.
• MTBF to WLL: Typically 50 million cycles.
• Elongation: Typically <0.4mm / at WLL.
• Output: Options for: mV/V / 4-20mA / 0-10v / RS485 or internal data logger.
• Output options include mV/V to the Crosby SP Handheld Plus, 4-20mA or 0-10v analogue to a PLC, data-logger or The Multi Operation Survey System (MOSS), RS485 or an integral data- logger storing up to one million readings and powered by an internal battery.

Dimensions & Specifications