Manual worm gear hand winch, with single or double drum. Optional finish and ATEX rating. Range from 2000kg to 7500kg
Model:
WW-D / GHOW-4756
More from:
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum.
The winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches
The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two speeds. Most parts are made from steel and have been either painted or zinc plated. The winch with 7500 kg capacity has the worm-worm gear transmission completely protected by a sealed cover.
As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable.
Product Features
Robust and safe hoisting winch with two speeds.
Twin Drum winch is suitable for two cables.
In compliance with EN13157, DIN 15020 and EX types ATEX 114 (94/9/EG).
Static safety factor 4.
Square worm-wormwheel transmission and maintenance free bearings.
Cable outlet upwards, downwards or at rear.
Adjustable crank, with ergonomic grip.
Easy to grease worm-wormwheel transmission.
Load pressure brake with silent double ratchet system.
Paint thickness is 60 - 80 Micron in 1 layer (in compliance with DIN/ISO 12944, C1M). Winch: Grey (RAL 7035), Drum: Black (RAL 9005).
Suitable to be used with winch power tool AM5000.
Also available with grooved drum, multiple compartment cable drum, Zinc plated (6-8 micron) finish and ATEX certified.
Double Drum Winch
AM5000 Hand Winch Power Tool
Rear Cable Outlet
Technical Specifications: Single Drum
Model
WW2000
WW3000
WW4000
WW5000
WW7500
Capacity: 1st Cable Layer
2000kg
3000kg
4000kg
5000kg
7500kg
Capacity: Last Cable Layer
1038kg
1667kg
2282kg
3276kg
3748kg
Crank force 1st Cable Position
24 (11) daN
31 (14) daN
30 (13) daN
73 (14) daN
78 (15) daN
Hoisting Length by one rotation of crank (1st Layer)
12 (5)mm
11 (5)mm
11 (2)mm
13 (3)mm
11 (2)mm
Max. Cable Storage (1 drum compartment)
75m
68m
53m
43m
72m
Cable Dia. (EN 12383-4)
11mm
14mm
16mm
18mm
22mm
Min. Breaking Load Cable
63kN
102kN
133kN
168kN
251kN
Mounting
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Weight
60kg
78kg
80kg
117kg
190kg
Dimensions: Single Drum
Dimensions (mm)
A
B
C
D
G
H
J
K
L
M
N
O
P
R
S
WW2000
410
310
196
360
137
177
133
25
312
372
57
705
380
434
220
WW3000
436
380
251
386
137
203
168
25
375
480
65
813
380
536
220
WW4000
436
380
251
386
137
203
168
25
375
480
65
813
380
536
220
WW5000
436
467
316
386
137
200
219
25
437
515
75
847
380
618
220
WW7500
510
500
350
455
189
202
245
25
630
635
75
968
380
748
220
May be subject to change
Technical Specifications: Twin Drum
Model
WW2000
WW3000
WW4000
WW5000
Capacity: 1st Cable Layer
2 x 100kg
2 x 1500kg
2 x 2000kg
2 x 2500kg
Capacity: Last Cable Layer
2 x 519kg
2 x 833kg
2 x 1141kg
2 x 1638kg
Crank force 1st Cable Position
24 (11) daN
31 (14) daN
30 (13) daN
73 (14) daN
Hoisting Length by one rotation of crank (1st Layer)
12 (5)mm
11 (5)mm
11 (2)mm
13 (3)mm
Max. Cable Storage (1 drum compartment)
68m
66m
53m
35m
Cable Dia. (EN 12383-4)
8mm
10mm
11mm
14mm
Min. Breaking Load Cable
63kN
102kN
133kN
168kN
Mounting
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Weight
62kg
80kg
82kg
119kg
Dimensions: Twin Drum
Dimensions (mm)
A
B
C
D
G
H
J
K
L
M
N
O
P
R
S
WW2000
410
310
196
360
137
86
133
25
312
372
57
705
380
434
220
WW3000
436
380
251
386
137
99
168
25
375
480
65
813
380
536
220
WW4000
436
380
251
386
137
99
168
25
375
480
65
813
380
536
220
WW5000
436
467
316
386
137
96
219
25
437
515
75
847
380
618
220
May be subject to change
Contact Us About This Product
If you wish to receive a quote for this product, please use the Pricing section to the right, this form is for general enquiries regarding this product only.
Regarding: Gebuwin WW-D Hand Operated Worm Gear Winch
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Pricing
The Gebuwin range of hand driven worm gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum.
The winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches
The winches have a static safety factor of minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two speeds. Most parts are made from steel and have been either painted or zinc plated. The winch with 7500 kg capacity has the worm-worm gear transmission completely protected by a sealed cover.
As an extra option, it is possible to have an adjustable slipping brake on the cable drum which allows for a controlled release of the cable.
Product Features
Robust and safe hoisting winch with two speeds.
Twin Drum winch is suitable for two cables.
In compliance with EN13157, DIN 15020 and EX types ATEX 114 (94/9/EG).
Static safety factor 4.
Square worm-wormwheel transmission and maintenance free bearings.
Cable outlet upwards, downwards or at rear.
Adjustable crank, with ergonomic grip.
Easy to grease worm-wormwheel transmission.
Load pressure brake with silent double ratchet system.
Paint thickness is 60 - 80 Micron in 1 layer (in compliance with DIN/ISO 12944, C1M). Winch: Grey (RAL 7035), Drum: Black (RAL 9005).
Suitable to be used with winch power tool AM5000.
Also available with grooved drum, multiple compartment cable drum, Zinc plated (6-8 micron) finish and ATEX certified.
Double Drum Winch
AM5000 Hand Winch Power Tool
Rear Cable Outlet
Technical Specifications: Single Drum
Model
WW2000
WW3000
WW4000
WW5000
WW7500
Capacity: 1st Cable Layer
2000kg
3000kg
4000kg
5000kg
7500kg
Capacity: Last Cable Layer
1038kg
1667kg
2282kg
3276kg
3748kg
Crank force 1st Cable Position
24 (11) daN
31 (14) daN
30 (13) daN
73 (14) daN
78 (15) daN
Hoisting Length by one rotation of crank (1st Layer)
12 (5)mm
11 (5)mm
11 (2)mm
13 (3)mm
11 (2)mm
Max. Cable Storage (1 drum compartment)
75m
68m
53m
43m
72m
Cable Dia. (EN 12383-4)
11mm
14mm
16mm
18mm
22mm
Min. Breaking Load Cable
63kN
102kN
133kN
168kN
251kN
Mounting
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Weight
60kg
78kg
80kg
117kg
190kg
Dimensions: Single Drum
Dimensions (mm)
A
B
C
D
G
H
J
K
L
M
N
O
P
R
S
WW2000
410
310
196
360
137
177
133
25
312
372
57
705
380
434
220
WW3000
436
380
251
386
137
203
168
25
375
480
65
813
380
536
220
WW4000
436
380
251
386
137
203
168
25
375
480
65
813
380
536
220
WW5000
436
467
316
386
137
200
219
25
437
515
75
847
380
618
220
WW7500
510
500
350
455
189
202
245
25
630
635
75
968
380
748
220
May be subject to change
Technical Specifications: Twin Drum
Model
WW2000
WW3000
WW4000
WW5000
Capacity: 1st Cable Layer
2 x 100kg
2 x 1500kg
2 x 2000kg
2 x 2500kg
Capacity: Last Cable Layer
2 x 519kg
2 x 833kg
2 x 1141kg
2 x 1638kg
Crank force 1st Cable Position
24 (11) daN
31 (14) daN
30 (13) daN
73 (14) daN
Hoisting Length by one rotation of crank (1st Layer)
12 (5)mm
11 (5)mm
11 (2)mm
13 (3)mm
Max. Cable Storage (1 drum compartment)
68m
66m
53m
35m
Cable Dia. (EN 12383-4)
8mm
10mm
11mm
14mm
Min. Breaking Load Cable
63kN
102kN
133kN
168kN
Mounting
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Wall, 4 x M20 Class 8.8
Weight
62kg
80kg
82kg
119kg
Dimensions: Twin Drum
Dimensions (mm)
A
B
C
D
G
H
J
K
L
M
N
O
P
R
S
WW2000
410
310
196
360
137
86
133
25
312
372
57
705
380
434
220
WW3000
436
380
251
386
137
99
168
25
375
480
65
813
380
536
220
WW4000
436
380
251
386
137
99
168
25
375
480
65
813
380
536
220
WW5000
436
467
316
386
137
96
219
25
437
515
75
847
380
618
220
May be subject to change
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Gebuwin WW-D Hand Operated Worm Gear Winch
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
