Crosby AS17 Bullet Jaw Slurry Angular Contact Bearing Swivel are one of 9 options of crosby swivel in this style and offer capaties of up to 35 tonne.
The Crosby AS-17 Slurry Swivel is a zinc plated Bullet Type Swivel (AS-7), designed with two rubber lip style seals about the shaft. The threaded cap is sealed with a silicone sealant and secured with a set screw. The swivels are provided with an Alemite grease fitting for easy lubrication.
Wire Rope Sizes: 1/8" through 1-1/2"
Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope.
Designed for high rotation speed: Lower torque required to initiate rotation.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Hook models utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain the patented QUIC-CHECK markings.
Design Factor of 5 to 1.
Entire swivel is Zinc plated to resist corrosion.
Each swivel, 8.5 tons and larger is furnished with a pressure lubrication fitting.
Metric Dimenisons & Specifications
AS-17 Bullet Jaw Slurry Swivel
Dimensions (mm)
Working Load Limit (t)*
WireRope Size (mm)
AS-17 Stock No.
Weight Each (kg)
A
B
C
D
E
F
G
7.65
19
8013342
6.57
76.2
257
321
31.8
33.3
25.4
54.1
13.5
25
8013343
18.1
102
343
432
44.5
44.5
38.1
82.5
22.5
32
8013376
38.1
127
410
531
60.5
51.0
51.0
93.7
31.5
38
8013344
38.1
127
410
531
60.5
51.0
51.0
93.7
40.5
-
2016585
68.0
152
514
666
76.2
64.3
57.2
69.9
*Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.
Product Options
AS-20 thimble Insert
When terminating with wire rope clips, we recommend tde use of the thimble Insert. The result will be extended wire rope life.
Allows standard swivel to be used in application requiring a thimble fitting.
For use with our Bullet Style (AS-7) and Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Crosby AS17 Bullet Jaw and Slurry Swivel, WLL Range from 8500kg to 35 tonne
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Crosby AS17 Bullet Jaw Slurry Angular Contact Bearing Swivel are one of 9 options of crosby swivel in this style and offer capaties of up to 35 tonne.
The Crosby AS-17 Slurry Swivel is a zinc plated Bullet Type Swivel (AS-7), designed with two rubber lip style seals about the shaft. The threaded cap is sealed with a silicone sealant and secured with a set screw. The swivels are provided with an Alemite grease fitting for easy lubrication.
Wire Rope Sizes: 1/8" through 1-1/2"
Angular contact bearings maximize efficiency, reliability and service life of swivel and extend the life of the wire rope.
Designed for high rotation speed: Lower torque required to initiate rotation.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Hook models utilize genuine Crosby hooks which are forged alloy steel, Quenched and Tempered and contain the patented QUIC-CHECK markings.
Design Factor of 5 to 1.
Entire swivel is Zinc plated to resist corrosion.
Each swivel, 8.5 tons and larger is furnished with a pressure lubrication fitting.
Metric Dimenisons & Specifications
AS-17 Bullet Jaw Slurry Swivel
Dimensions (mm)
Working Load Limit (t)*
WireRope Size (mm)
AS-17 Stock No.
Weight Each (kg)
A
B
C
D
E
F
G
7.65
19
8013342
6.57
76.2
257
321
31.8
33.3
25.4
54.1
13.5
25
8013343
18.1
102
343
432
44.5
44.5
38.1
82.5
22.5
32
8013376
38.1
127
410
531
60.5
51.0
51.0
93.7
31.5
38
8013344
38.1
127
410
531
60.5
51.0
51.0
93.7
40.5
-
2016585
68.0
152
514
666
76.2
64.3
57.2
69.9
*Ultimate Load is 5 times the Working Load Limit. Individually Proof Tested to 2 times the Working Load Limit.
Product Options
AS-20 thimble Insert
When terminating with wire rope clips, we recommend tde use of the thimble Insert. The result will be extended wire rope life.
Allows standard swivel to be used in application requiring a thimble fitting.
For use with our Bullet Style (AS-7) and Jaw Style (AS-1, AS-2, AS-3 & AS-4) swivels.
