Crosby S505 National Steel Swaging Sleeves, Size Range from 6mm to 114mm

• For Flemish eye wire rope splicing.
• Designed for low temperature toughness.
• Resists cracking when swaged (equals or exceeds stainless steel sleeves).
• Special processed low carbon steel.
• “COLD TUFF”® for better swageability.
• Sizes 6-7 to 37-38mm satisfy the type testing requirements for Flemish ferrule secured systems per EN 13411-3:2004 except those additional requirements defined for crane hoist rope.
• Can be stamped for identification after swaging without concern for fractures when following these directions.
• Use round corner stamps to a maximum depth of 1.38mm. The area for stamping should be on the side of the sleeve in the plane of the sling eye, and no less than 7mm from either end of the sleeve.
• Standard Steel Sleeve terminations have efficiency ratings as follows based on the catalog strength of wire rope.

** NOTE: S-505 Standard Sleeves are recommended for use with 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope. Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it is recommended that the termination be destructive and documented to prove the adequacy of the assembly to be manufactured.

Metric Dimensions & Specifications

S-505 Termination Efficiency
Size (mm)	Type of Wire Rope *
	IWRC	FC
6 - 26	96%	93%
28 - 52	92%	89%
56 and Larger	90%	87%