- Available in capacities of .5, 1 and 2 metric tons.
- Wide variety of jaw openings available: 0 to 38mm.
- Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Company name (Crosby IP), logo, Working Load Limit and jaw opening permanently stamped on body.
- Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.
- Full 180° turning range for material transfer, turning or moving.
- Lock open, lock closed ability with latch for pretension on material and then release of material.
- Material must be clean and dry.
- There is no minimum WLL required.
- Maintenance and repair kits are available.
- Manufactured by an ISO 9001 facility.
- All sizes are RFID EQUIPPED.
- The special IPNMN10JC is also available with curved jaws.
Crosby IPNM10N
The IPNM10N vertical lifting clamp is used for lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed.
Materials such as aluminum, stainless steel, painted materials, aircraft skins, composite material, glass, plastic, etc. can be lifted without marring or scratching the surface of the material.
Crosby IPNM10P
The IPNM10P vertical lifting clamp is used for lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed.
Materials such as aluminum, stainless steel, painted materials, aircraft skins, composite material, glass, plastic, etc. can be lifted without marring or scratching the surface of the material.
The protective cover reduces the risk of damage to surrounding plates.
Metric Dimensions & Specifications
| Model |
Working Load Limit (t)* |
Stock No. |
Weight (kg) |
Dimensions (mm) |
| |
|
|
|
Jaw A |
B |
C |
D |
E |
F |
G |
H |
K |
| IPNM10N |
0.5 |
2703811 |
2.7 |
0 - 10 |
84 |
159 |
235 |
40 |
128 |
60 |
41 |
11 |
| IPNM10N |
1 |
2703738 |
4.4 |
0 - 20 |
97 |
209 |
278 |
40 |
184 |
80 |
56 |
11 |
| |
|
|
|
|
|
|
|
|
| IPNM10 |
2 |
2703442 |
14.5 |
0 - 40 |
153 |
258 |
396 |
70 |
296 |
100 |
161 |
16 |
| with Protection Cap |
| IPNM10P |
0.5 |
2703278 |
2.8 |
0 - 10 |
82 |
157 |
221 |
40 |
145 |
68 |
48 |
11 |
| IPNM10P |
1 |
2703279 |
4.5 |
0 - 20 |
97 |
195 |
276 |
40 |
205 |
82 |
66 |
11 |
| with Larger Jaw Opening |
| IPNM10NJ |
1 |
2703814 |
4.7 |
20 - 37 |
97 |
220 |
321 |
40 |
200 |
80 |
56 |
11 |
| IPNM10NJ1 |
1 |
2703819 |
5.5 |
0 - 25 |
97 |
238 |
351 |
40 |
213 |
80 |
63 |
11 |
* Design Factor based on EN 13155 and ASME B30.20.
