Beam Clamp with clamping and locking screw, can also be used to lift girders when used in pairs. Range from 1000kg to 10,000kg
Model:
Tractel TOPAL GP
Quick Ref:
TTG-3299
More from:
This clamp is designed to provide a permanent or semi-permanent suspension point on girders, to suspend hoists, lifting beams, pulleys, etc.
This clamp can also lift girders when used in pairs with a lifting beam.
These beam clamps are fitted with a screw allowing the locking in position for providing an hanging point. One of the arms slides, therefore allowing the easy positioning and clamping of the loaded beam clamp. The use is made easier thanks to a handle.
Functioning
The clamp opening is adjusted thanks to the sliding arm and the locking screw. The clamp is immobilized on the profile:
by activating the locking screw when providing an hanging point.
by sliding the arm in case of lifting operation (closing without any intervention).
The clamp’s loading ensures proportional clamping.
How to Use the Beam Clamp
Fit the clamp to the beam.
Adjust its opening using the sliding arm.
If the clamp is used as a suspension point on girder: Lock the sliding arm via the fixing screw (tighten this screw by hand using the handle, no tool needed).
If the clamp is used to lift girders: In that case, it is not necessary to lock the sliding arm, lifting ensures clamping of the clamp.
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Tractel TOPAL GP Beam Clamp
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
This clamp is designed to provide a permanent or semi-permanent suspension point on girders, to suspend hoists, lifting beams, pulleys, etc.
This clamp can also lift girders when used in pairs with a lifting beam.
These beam clamps are fitted with a screw allowing the locking in position for providing an hanging point. One of the arms slides, therefore allowing the easy positioning and clamping of the loaded beam clamp. The use is made easier thanks to a handle.
Functioning
The clamp opening is adjusted thanks to the sliding arm and the locking screw. The clamp is immobilized on the profile:
by activating the locking screw when providing an hanging point.
by sliding the arm in case of lifting operation (closing without any intervention).
The clamp’s loading ensures proportional clamping.
How to Use the Beam Clamp
Fit the clamp to the beam.
Adjust its opening using the sliding arm.
If the clamp is used as a suspension point on girder: Lock the sliding arm via the fixing screw (tighten this screw by hand using the handle, no tool needed).
If the clamp is used to lift girders: In that case, it is not necessary to lock the sliding arm, lifting ensures clamping of the clamp.
