Crosby IPSTARTEC11 Tilting Beam Clamps, WLL 1500kg or 2500kg
Crosby IPSTARTEC11 Tilting Beam Clamps, WLL 1500kg or 2500kg
Crosby Beam Clamp for Steel 'H' and 'I' Profiles, Designed for the controlled tilting, transportation and stacking of beams.
Model:
Crosby IPSTARTEC11 / TBC-899
More from:
The Crosby IPSTARTEC11 beam clamp has been specially developed for lifting with the body in vertical position, controlled tilting, transportation and stacking of steel “H” and “I” profiles.
By placing the chain guide in the appropriate position, it is easy to switch from lifting to tilting and back again, which shifts the center of gravity.
Available in capacities of 1.5 and 2.5 metric tons.
Jaw openings available: 6 to 20mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
Maintenance and repair kits are available.
Manufactured by an ISO 9001 facility.
All sizes are RFID EQUIPPED.
Metric Dimensions and Specifications
Model
Working Load Limit (t)*
Stock No.
Weight (kg)
Dimensions (mm)
Jaw A
B
C
D
E
F
G
H
J
K
IPSTARTEC11
1.5
2701812
6.6
6 - 12
140
39
575
110
81
129
54
126
16
IPSTARTEC11
2.5
2701822
14.5
6 - 20
210
55
725
135
115
182
74
140
18
* Design Factor based on EN 13155 and ASME B30.20.
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Crosby IPSTARTEC11 Tilting Beam Clamps, WLL 1500kg or 2500kg
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
The Crosby IPSTARTEC11 beam clamp has been specially developed for lifting with the body in vertical position, controlled tilting, transportation and stacking of steel “H” and “I” profiles.
By placing the chain guide in the appropriate position, it is easy to switch from lifting to tilting and back again, which shifts the center of gravity.
Available in capacities of 1.5 and 2.5 metric tons.
Jaw openings available: 6 to 20mm.
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
Maintenance and repair kits are available.
Manufactured by an ISO 9001 facility.
All sizes are RFID EQUIPPED.
Metric Dimensions and Specifications
Model
Working Load Limit (t)*
Stock No.
Weight (kg)
Dimensions (mm)
Jaw A
B
C
D
E
F
G
H
J
K
IPSTARTEC11
1.5
2701812
6.6
6 - 12
140
39
575
110
81
129
54
126
16
IPSTARTEC11
2.5
2701822
14.5
6 - 20
210
55
725
135
115
182
74
140
18
* Design Factor based on EN 13155 and ASME B30.20.
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Crosby IPSTARTEC11 Tilting Beam Clamps, WLL 1500kg or 2500kg
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
