- Lifting Equipment
-
Height Safety
Height Safety Equipment
- Material Handling & Jacking Equipment
- Shop by Brand
- Clearance
-
Contact
Get In Touchsales@liftingsafety.co.uk +44 (0)1977 684 600
- Home/
- Lifting Equipment/
- General Lifting Equipment/
- Eye Bolts and Nuts/
- Non-Swivel Eye Bolts & Eye Nuts/
- Metric Non-Swivel Eye Bolts/
- Gunnebo Non-Swivel Metric Thread Eye Bolts/
- Gunnebo Grade 8 ELP Series Lifting Point
Safety Factor 4:1
| Type | SWL (t) | B (mm) | D (mm) | G (mm) | H (mm) | L (mm) | M (mm) | Weight (kg) |
| ELP-M16-8 | 1** | 72 | 16 | 42 | 56 | 24 | M16 | 0.35 |
| ELP-M20-8 | 1.5** | 72 | 16 | 42 | 58 | 30 | M20 | 0.42 |
| ELP-M24-8 | 2** | 88 | 19 | 48 | 69 | 36 | M24 | 0.87 |
| ELP-M30-8 | 3** | 106 | 22 | 60 | 84 | 45 | M30 | 1.35 |
Note! Threaded depths need to be at least 1xM for steel, 1,25x M for cast iron and 2xM for aluminium alloy.

Load Chart
Note! The above loads apply to normal usage and equally loaded legs. For asymmetric loaded chain slings, the following is recommended:
- A two-legged system is rated as a single-legged system.
- A three- or four-legged system is rated as a two-legged system.
** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher SWL.
| Type | Single Leg | 2 Leg | 3 and 4 Leg | ||
| 0° (true vertical) | α 0-90° β 0-45° |
α 90-120° β 45-60° |
α 0-90° β 0-45° |
α 90-120° β 45-60° |
|
![]() |
![]() |
![]() |
|||
| ELP-M16-8 / 4238-T22385 | 1.0t** | 1.4t | 1.0t | 2.1t | 1.5t |
| ELP-M20-8 / 4238-T22386 | 1.5t** | 2.1t | 1.5t | 3.2t | 2.3t |
| ELP-M24-8 / 4238-T22387 | 2.0t** | 2.8t | 2.0t | 4.2t | 3.0t |
| ELP-M30-8 / 4238-T22388 | 3.0t** | 4.2t | 3.0t | 6.3t | 4.5t |
Safety Factor 4:1
| Type | SWL (t) | B (mm) | D (mm) | G (mm) | H (mm) | L (mm) | M (mm) | Weight (kg) |
| ELP-M16-8 | 1** | 72 | 16 | 42 | 56 | 24 | M16 | 0.35 |
| ELP-M20-8 | 1.5** | 72 | 16 | 42 | 58 | 30 | M20 | 0.42 |
| ELP-M24-8 | 2** | 88 | 19 | 48 | 69 | 36 | M24 | 0.87 |
| ELP-M30-8 | 3** | 106 | 22 | 60 | 84 | 45 | M30 | 1.35 |
Note! Threaded depths need to be at least 1xM for steel, 1,25x M for cast iron and 2xM for aluminium alloy.

Load Chart
Note! The above loads apply to normal usage and equally loaded legs. For asymmetric loaded chain slings, the following is recommended:
- A two-legged system is rated as a single-legged system.
- A three- or four-legged system is rated as a two-legged system.
** In case of 1-leg application where loading is limited to straight loading in the direction of thread (no bending force) it is possible to use ELP with four times higher SWL.
| Type | Single Leg | 2 Leg | 3 and 4 Leg | ||
| 0° (true vertical) | α 0-90° β 0-45° |
α 90-120° β 45-60° |
α 0-90° β 0-45° |
α 90-120° β 45-60° |
|
![]() |
![]() |
![]() |
|||
| ELP-M16-8 / 4238-T22385 | 1.0t** | 1.4t | 1.0t | 2.1t | 1.5t |
| ELP-M20-8 / 4238-T22386 | 1.5t** | 2.1t | 1.5t | 3.2t | 2.3t |
| ELP-M24-8 / 4238-T22387 | 2.0t** | 2.8t | 2.0t | 4.2t | 3.0t |
| ELP-M30-8 / 4238-T22388 | 3.0t** | 4.2t | 3.0t | 6.3t | 4.5t |
You May Also Like
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab above, this form is for general enquiries regarding this product only.
You can also Request a Quote using the Quote tab above!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!


