PL lifting clamp for beam profiles to horizontally lift. Range from 1000kg to 4000kg
Model:
TOPAL PL
Quick Ref:
TTP-3310
More from:
These grabs are designed to be used in pairs with a lifting beam.
These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.
Functioning
Place the clamp locked open over the profile. Lift up the lever while starting off the lift and hold it in the up position to prevent from locking again against the fastening screw. Lifting ensures proportional clamping, thus minimising load marking. When laying down, the clamp automatically locks itself open. Handles make the positioning easier.
Instructions For Use
Positioning: suspend the grab in its open position by its ring (1) (locking pawl (2) activated).
For lifting: present the grab vertically to the product to be lifted.
Lower the lifting beam and grab assembly until the grabs are applied against the product to be lifted.
Swivel the locking pawl (2) manually whilst starting off the lifting operation, keep them in the up position to prevent then from locking onto their fastening screw (3).
Release the locking pawls (2) of each grab making sure that the claw is well above the fastening screw (3) then perform lifting.
When laying down, lower the lifting beam and grab assembly until the locking pawls are automatically locked (2) onto the fastening screw (3).
The grabs are locked in the open position, the lifting beam and grab assembly can be lifted up ready to be used again
Dimensions & Specifications
Model
Capacity (kg)
Opening (mm)
Weight (kg)
A
B Handle
B
C
D
E
F
G
H
I
J
K Min Opening
Min
Max
Min
Max
Min
Max
Min
Max
PL1 95-200
1000
95-200
4
182
348
166
174
73
135
284
504
18
52
69
12
95
22
230
46
PL2 120-300
2000
120-300
8
196
462
167
176
76
140
348
604
23
64
80
20
119
50
330
30
PL3 180-450
3000
180-450*
16
296
627
200
205
102
182
435
768
36
74
92
25
143
61
420
23
PL4 120-300
4000
120-300
14
196
444
173
176
75
139
398
622
36
74
92
25
147
74
310
30
*PL3: for each profile >420mm, the clamp must be inserted from the end of the beam.
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Tractel TOPAL PL Girder Clamp
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
These grabs are designed to be used in pairs with a lifting beam.
These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.
Functioning
Place the clamp locked open over the profile. Lift up the lever while starting off the lift and hold it in the up position to prevent from locking again against the fastening screw. Lifting ensures proportional clamping, thus minimising load marking. When laying down, the clamp automatically locks itself open. Handles make the positioning easier.
Instructions For Use
Positioning: suspend the grab in its open position by its ring (1) (locking pawl (2) activated).
For lifting: present the grab vertically to the product to be lifted.
Lower the lifting beam and grab assembly until the grabs are applied against the product to be lifted.
Swivel the locking pawl (2) manually whilst starting off the lifting operation, keep them in the up position to prevent then from locking onto their fastening screw (3).
Release the locking pawls (2) of each grab making sure that the claw is well above the fastening screw (3) then perform lifting.
When laying down, lower the lifting beam and grab assembly until the locking pawls are automatically locked (2) onto the fastening screw (3).
The grabs are locked in the open position, the lifting beam and grab assembly can be lifted up ready to be used again
Dimensions & Specifications
Model
Capacity (kg)
Opening (mm)
Weight (kg)
A
B Handle
B
C
D
E
F
G
H
I
J
K Min Opening
Min
Max
Min
Max
Min
Max
Min
Max
PL1 95-200
1000
95-200
4
182
348
166
174
73
135
284
504
18
52
69
12
95
22
230
46
PL2 120-300
2000
120-300
8
196
462
167
176
76
140
348
604
23
64
80
20
119
50
330
30
PL3 180-450
3000
180-450*
16
296
627
200
205
102
182
435
768
36
74
92
25
143
61
420
23
PL4 120-300
4000
120-300
14
196
444
173
176
75
139
398
622
36
74
92
25
147
74
310
30
*PL3: for each profile >420mm, the clamp must be inserted from the end of the beam.
Contact Us About This Product
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Tractel TOPAL PL Girder Clamp
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
