Top Mount Fork Truck Mounted (and Crane slung) Drum Rotator. Rotation Types: loop chain, crank handle or hydraulics - 360kg
Top Mount Fork Truck Mounted (and Crane slung) Drum Rotator. Rotation Types: loop chain, crank handle or hydraulics - 360kg
Crane Slung or Fork Mounted Drum Rotator.
Model:
DR-571
More from:
Our popular Crane Slung Drum Rotator is designed to offer controlled pouring and transport of drums. In order to pick up a drum, set the girdle to its horizontal position by using the handle or chain fitted to the geared turning box./gearbox. The lifting yoke must then be positioned at a height such that the girdle fits between the drums centre most rolling hoops. Once securely fastened the drum can be lifted to pouring height and rotation can commence again by means of the handle or chain fitted to the gearbox. The gearbox will lock the drum at any angle during tipping.
Features
Designed primarily for sitting under an overhead crane for decanting the contents of 210 litre steel drums.
Rotation is by means of a crank handle or continuous loop chain, through a heavy duty gearbox.
The drum locks positively into the attachment using a single over-centre clamp and steel girdle.
Fitted with fork pockets for alternative use with a fork lift truck.
Rotation is carried out by means of a crank handle (for below shoulder operation), a hand chain (for operation above shoulder height) or by hydraulic operation (using a hydraulic motor to replace the handle chain that is connected to the aux valve on the truck.)
Supplied without hoses.
Additional Information
Crane Slung Drum Rotators are designed for controlled manual rotation of 210 litre drums, the attachment is slung under a crane, small fork pockets are fitted for use with a forklift truck. The gearbox allows controlled pouring and rotation through a full 360 degrees. Variations of girdle types are available to suit either steel or plastic drums. There is also a model for heavier drums of powder, scrap etc. As well as a model to suit 110 litre drums.
If you wish to receive a quote for this product, please use the tab, this form is for general enquiries regarding this product only.
Regarding: Top Mount Fork Truck Mounted (and Crane slung) Drum Rotator. Rotation Types: loop chain, crank handle or hydraulics - 360kg
Did you know?
You can also request a quote through the pricing tab!
You can easily add more than one item to the Quote Request. This is highly recommended as we will be able to suit your needs much more efficiently.
Share this page!
Our popular Crane Slung Drum Rotator is designed to offer controlled pouring and transport of drums. In order to pick up a drum, set the girdle to its horizontal position by using the handle or chain fitted to the geared turning box./gearbox. The lifting yoke must then be positioned at a height such that the girdle fits between the drums centre most rolling hoops. Once securely fastened the drum can be lifted to pouring height and rotation can commence again by means of the handle or chain fitted to the gearbox. The gearbox will lock the drum at any angle during tipping.
Features
Designed primarily for sitting under an overhead crane for decanting the contents of 210 litre steel drums.
Rotation is by means of a crank handle or continuous loop chain, through a heavy duty gearbox.
The drum locks positively into the attachment using a single over-centre clamp and steel girdle.
Fitted with fork pockets for alternative use with a fork lift truck.
Rotation is carried out by means of a crank handle (for below shoulder operation), a hand chain (for operation above shoulder height) or by hydraulic operation (using a hydraulic motor to replace the handle chain that is connected to the aux valve on the truck.)
Supplied without hoses.
Additional Information
Crane Slung Drum Rotators are designed for controlled manual rotation of 210 litre drums, the attachment is slung under a crane, small fork pockets are fitted for use with a forklift truck. The gearbox allows controlled pouring and rotation through a full 360 degrees. Variations of girdle types are available to suit either steel or plastic drums. There is also a model for heavier drums of powder, scrap etc. As well as a model to suit 110 litre drums.
