Crosby Imperial Thread Eyebolts - Non-swivel

We offer the range of Crosby S279 UNC thread  and metric thread Shoulder Type Machinery Eyebolts that are made from forged Steel (Quenched and Tempered) Working Load Limits shown are for in-line pull (Not pulled at an angle) and range from 200kg to 8500kg (650lbs to 24000lbs). These eye bolts are fatigue rated at 1.5 times the Working Load Limit (WLL) at twenty thousand cycles. Recommended for in-line pull.

Crosby G277 Shoulder Nut Eye Bolts are made from forged Steel and are quenched and tempered, they are also fatigue rated at 1.5 times the Working Load Limit (rated at 20,000 cycles) and the WLL shown her is for in line pull (not at an angle). All G277's are galvanized after threading (UNC) and are supplied with galvanised nuts

Our Crosby G291 Regular Nut long shank Eye Bolts are supplied forged Steel - Quenched and Tempered with fatigue rated at 1.5 times the Working Load Limit (WLL) at 20,000 cycle; All These G291 eye Bolts are Hot Dip galvanized after threading (UNC). They are supplied with standard Hot Dip galvanized hex nuts and are recommended for in line pull.

The Crosby G-257 Shoulder Nut Ring Bolts are forged eyebolt that is manufactured from forged steel and are quenched and tempered. They are Hot Dip galvanized (Bolt, Nut and ring) and UNC threaded after galvanising.

The Diameter of ring stock is same as shank diameter and the ring eyebolts are supplied in two safe working loads, 450kg (1200lbs) and 1000kg (2200lbs).

The range of Crosby S405 Eye Bolts are supplied Un-threaded; they are made from forged Steel that is quenched and Tempered. There are 9 options to choose from with different shaft diameters and length's that when threaded can achieve SWL's from 390kg to 8160kg,

Remember: these are not supplied threaded!

The Crosby G275 Screw threaded Eyebolts are made from forged Steel and are quenched and Tempered / hot dip galvanised.

The range of Crosby S293 Rivet Eye Bolts are made from forged steel that is quenched and tempered. There are 9 options to choose from with different shaft diameters and lengths.

Remember: these are not threaded!