Crosby S-276 Shoulder Nut Eye Bolts - Range from 290kg - 10,800kg
Model: Crosby G-277 / SNEB-2428
Crosby Shoulder Nut Eye Bolts.
Crosby G277 Shoulder Nut Eye Bolts are made from forged Steel and are quenched and tempered, they are also fatigue rated at 1.5 times the Working Load Limit (rated at 20,000 cycles) and the WLL shown her is for in line pull (not at an angle)
Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
All G277's are galvanized after threading (UNC and are supplied with galv nuts
Metric Dimensions
| Shank Diameter & Length (mm) | G-277 Stock No. | Working Load Limit (t)* | Weight Per 100 (kg) | Dimensions (mm) | ||||||||
| A | B | C | D | E | F | G | H | J | ||||
| 6.35 x 51.0 | 1045014 | .29 | 2.99 | 6.35 | 12.7 | 22.4 | 4.85 | 38.1 | 51.0 | 74.5 | 12.7 | 11.9 |
| 6.35 x 102 | 1045032 | .29 | 4.13 | 6.35 | 12.7 | 22.4 | 4.85 | 63.5 | 102 | 125 | 12.7 | 11.9 |
| 7.94 x 57.0 | 1045050 | .54 | 5.67 | 7.85 | 15.7 | 28.4 | 6.35 | 38.1 | 57.0 | 89.0 | 17.5 | 14.2 |
| 7.94 x 108 | 1045078 | .54 | 8.53 | 7.85 | 15.7 | 28.4 | 6.35 | 63.5 | 108 | 140 | 17.5 | 14.2 |
| 9.53 x 63.5 | 1045096 | .70 | 9.71 | 9.65 | 19.1 | 35.1 | 7.85 | 38.1 | 63.5 | 101 | 19.8 | 16.8 |
| 9.53 x 114 | 1045112 | .70 | 11.5 | 9.65 | 19.1 | 35.1 | 7.85 | 63.5 | 114 | 152 | 19.8 | 16.8 |
| 12.7 x 82.5 | 1045130 | 1.18 | 19.3 | 12.7 | 25.4 | 44.5 | 9.65 | 38.1 | 82.5 | 130 | 25.4 | 23.1 |
| 12.7 x 152 | 1045158 | 1.18 | 25.8 | 12.7 | 25.4 | 44.5 | 9.65 | 76.0 | 152 | 200 | 25.4 | 23.1 |
| 15.9 x 102 | 1045176 | 2.35 | 31.1 | 15.7 | 31.8 | 57.0 | 12.7 | 51.0 | 102 | 164 | 33.3 | 28.4 |
| 15.9 x 152 | 1045194 | 2.35 | 46.4 | 15.7 | 31.8 | 57.0 | 12.7 | 76.0 | 152 | 214 | 33.3 | 28.4 |
| 19.1 x 114 | 1045210 | 3.26 | 66 | 19.1 | 38.1 | 70.0 | 15.7 | 51.0 | 114 | 189 | 39.6 | 35.1 |
| 19.1 x 152 | 1045238 | 3.26 | 76 | 19.1 | 38.1 | 70.0 | 15.7 | 76.0 | 152 | 227 | 39.6 | 35.1 |
| 22.2 x 127 | 1045256 | 4.80 | 102 | 22.4 | 44.5 | 82.5 | 19.1 | 63.5 | 127 | 215 | 46.7 | 39.6 |
| 25.4 x 152 | 1045292 | 6.03 | 166 | 25.4 | 51.0 | 95.5 | 22.4 | 76.0 | 152 | 253 | 53.0 | 46.0 |
| 25.4 x 229 | 1045318 | 6.03 | 192 | 25.4 | 51.0 | 95.5 | 22.4 | 102 | 229 | 329 | 53.0 | 46.0 |
| 31.8 x 203 | 1045336 | 9.52 | 295 | 31.8 | 63.5 | 114 | 25.4 | 102 | 203 | 323 | 62.5 | 58.0 |
| 31.8 x 305 | 1045354 | 9.52 | 361 | 31.8 | 63.5 | 114 | 25.4 | 102 | 305 | 425 | 62.5 | 58.0 |
| 38.1 x 381 | 1045372 | 10.8 | 646 | 38.1 | 76.0 | 140 | 31.8 | 152 | 381 | 527 | 76.0 | 70.0 |
As advertised in Crosby General Catalogue 2009 Page 143, and previously in Crosby General Catalogue 2006 Page 137.
Imperial Dimensions
| Shank Diameter & Length (in.) |
G-277 Stock No. Galv. |
Working Load Limit * (lbs.) |
Weight Per 100 (lbs.) |
Dimensions (in.) |
||||||||
| A | B | C | D | E | F | G | H | J | ||||
| 1/4 x 2 | 1045014 | 650 | 6.60 | .25 | .50 | .88 | .19 | 1.50 | 2.00 | 2.94 | .50 | .47 |
| 1/4 x 4 | 1045032 | 650 | 9.10 | .25 | .50 | .88 | .19 | 2.50 | 4.00 | 4.94 | .50 | .47 |
| 5/16 x 2-1/4 | 1045050 | 1200 | 12.50 | .31 | .62 | 1.12 | .25 | 1.50 | 2.25 | 3.50 | .69 | .56 |
| 5/16 x 4-1/4 | 1045078 | 1200 | 18.80 | .31 | .62 | 1.12 | .25 | 2.50 | 4.25 | 5.50 | .69 | .56 |
| 3/8 x 2-1/2 | 1045096 | 1550 | 21.40 | .38 | .75 | 1.38 | .31 | 1.50 | 2.50 | 3.97 | .78 | .66 |
| 3/8 x 4-1/2 | 1045112 | 1550 | 25.30 | .38 | .75 | 1.38 | .31 | 2.50 | 4.50 | 5.97 | .78 | .66 |
| 1/2 x 3-1/4 | 1045130 | 2600 | 42.60 | .50 | 1.00 | 1.75 | .38 | 1.50 | 3.25 | 5.12 | 1.00 | .91 |
| 1/2 x 6 | 1045158 | 2600 | 56.80 | .50 | 1.00 | 1.75 | .38 | 3.00 | 6.00 | 7.88 | 1.00 | .91 |
| 5/8 x 4 | 1045176 | 5200 | 68.60 | .62 | 1.25 | 2.25 | .50 | 2.00 | 4.00 | 6.44 | 1.31 | 1.12 |
| 5/8 x 6 | 1045194 | 5200 | 102.40 | .62 | 1.25 | 2.25 | .50 | 3.00 | 6.00 | 8.44 | 1.31 | 1.12 |
| 3/4 x 4-1/2 | 1045210 | 7200 | 144.50 | .75 | 1.50 | 2.75 | .62 | 2.00 | 4.50 | 7.44 | 1.56 | 1.38 |
| 3/4 x 6 | 1045238 | 7200 | 167.50 | .75 | 1.50 | 2.75 | .62 | 3.00 | 6.00 | 8.94 | 1.56 | 1.38 |
| 7/8 x 5 | 1045256 | 10600 | 225.00 | .88 | 1.75 | 3.25 | .75 | 2.50 | 5.00 | 8.46 | 1.84 | 1.56 |
| 1 x 6 | 1045292 | 13300 | 366.30 | 1.00 | 2.00 | 3.75 | .88 | 3.00 | 6.00 | 9.97 | 2.09 | 1.81 |
| 1 x 9 | 1045318 | 13300 | 422.50 | 1.00 | 2.00 | 3.75 | .88 | 4.00 | 9.00 | 12.97 | 2.09 | 1.81 |
| 1-1/4 x 8 | 1045336 | 21000 | 650.00 | 1.25 | 2.50 | 4.50 | 1.00 | 4.00 | 8.00 | 12.72 | 2.47 | 2.28 |
| 1-1/4 x 12 | 1045354 | 21000 | 795.00 | 1.25 | 2.50 | 4.50 | 1.00 | 4.00 | 12.00 | 16.72 | 2.47 | 2.28 |
| 1-1/2 x 15 | 1045372 | 24000 | 1425.00 | 1.50 | 3.00 | 5.50 | 1.25 | 6.00 | 15.00 | 20.75 | 3.00 | 2.75 |
Crosby-catalogue-page-number-143.pdf
(approx. 0.1Mb) Product Warnings
PDF containing all warning information relevant to the safe use of this product(approx. 0.1Mb)
NOTE: Pricing and specifications may be subject to change without notice. Prices shown may be UK only prices and therefore export pricing may vary dependant on location.
Images are for display purposes only.
Images are for display purposes only.
