Pewag "PLBW Beta" Bolt-on Swivel Lifting Point. Metric or Imperial Thread. WLL Range from 0.3t upto 15t

The PLBW Beta by Pewag is another screwable lifting point that is 360° rotatable, similar to the PLAW Alpha lifting point, but with a greater permitted pivot-pull-direction range which allows the load ring to be movable through a pivot range of 180°, which can be positioned at any angle within this range due to it featuring a replaceable and patented spring. In the permitted applications, this lifting point offers five-fold safety (n.b. some versions are 4:1 - See data-tables below).

Due to the pewag quality standard, each lifting point comes with an individual serial number. The lifting points are marked with the admissible load capacity for the most unfavourable application mode, allowing for an increased load capacity in case of vertical loads.

The hexagonal special screw made from grade 10.9 material is also interchangeable and secured against loss. The screw is 100% crack-tested as well as covered with a chromate VI-free protection against corrosion and marked with the load capacity and thread size. It can be tightened with a hexagon wrench or spanner wrench.

Pewag winner profilift beta is available with metric or UNC-thread. The versions with metric thread are also available with customised thread lengths.

All load capacities, categorised by method of lifting, number of legs and angle of inclination are contained in a table that forms an integral part of the operating manual included with each lifting point.

Also available with peTAG upon request.

Permitted usage

For load capacities in the permitted directions of pull please refer to the load capacity table.

Non-permitted usage

During assembly, ensure that improper loading cannot arise due to any of the following factors:

Direction of pull is obstructed.

Direction of pull is not within the indicated area.

Loading ring rests against edges or loads.

The loading ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.

Custom Thread Lengths (Metric Only)

Calculating the required thread length (L):

L = H + S + K + X

H = Material height

S = Thickness of the washer

K = Height of the nut (depending on the thread size of the screw)

X = Excess length of the screw (twofold pitch of the screw)

L max. = n max.

In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a screw nut.

For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.

Specifications

Metric

Code / Type	Thread (mm)	Load capacity (kg)	a (mm)	b (mm)	c (mm)	e (mm)	f (mm)	g (mm)	h (mm)	n (mm)	n max (mm)	(mm)	(mm)	Weight (kg/pc.)
PLBW 0,3t	M8	300	29	56	30	38	18	27	94	13	80	8	15	0.31
PLBW 0,6t	M10	600	29	56	30	38	18	27	94	15	100	8	15	0.35
PLBW 1t	M12	1000	29	56	30	38	18	27	94	17	180	8	15	0.37
PLBW 1,3t	M14	1300	43	79	45	55	25	38	138	22	220	10	24	1.03
PLBW 1,6t	M16	1600	43	79	45	55	25	38	138	24	260	10	24	1.04
PLBW 2t	M18	2000	43	79	45	55	25	38	138	27	295	10	24	1.07
PLBW 2,5t	M20	2500	43	79	45	55	25	38	138	30	335	10	24	1.08
PLBW 3t	M22	3000	64	118	68	85	38	58	209	33	355	14	36	3.5
PLBW 4t	M24	4000	64	118	68	85	38	58	209	36	355	14	36	3.6
PLBW 5t	M27	5000	64	118	68	85	38	58	209	40	355	14	36	3.6
PLBW 6,3t	M30	6300	64	118	68	85	38	58	209	45	355	14	36	3.7
PLBW 8t	M33	8000	106	188	108	132	60	91	331	54	328	19	55	14.3
PLBW 10t	M36	10000	106	188	108	132	60	91	331	59	328	19	55	14.4
PLBW 12,5t	M42	12500	106	188	108	132	60	91	331	69	328	19	55	14.7
PLBW 15t	M48	15000	106	188	108	132	60	91	331	74	328	19	55	15

Imperial (UNC)

Code / Type	Thread (inch)	Load capacity (lbs)	a (inch)	b (inch)	c (inch)	e (inch)	f (inch)	g (inch)	h (inch)	n (inch)	n max (inch)	(inch)	(inch)	Weight (lbs/pc.)
PLBW U 5/16	5/16"-18	660	1.14	2.2	1.18	1.5	0.71	1.06	3.7	0.51	-	5/16"	5/8"	0.71
PLBW U 3/8	3/8"-16	1300	1.14	2.2	1.18	1.5	0.71	1.06	3.7	0.59	-	5/16"	5/8"	0.73
PLBW U 7/16	7/16"-14	2200	1.14	2.2	1.18	1.5	0.71	1.06	3.7	0.67	-	5/16"	5/8"	0.75
PLBW U 1/2	1/2"-13	2200	1.14	2.2	1.18	1.5	0.71	1.06	3.7	0.67	-	5/16"	5/8"	0.77
PLBW U 9/16	9/16"-12	3000	1.69	3.11	1.77	2.17	0.98	1.5	5.43	0.87	-	5/16"	1"	2.27
PLBW U 5/8	5/8"-11	3500	1.69	3.11	1.77	2.17	0.98	1.5	5.43	0.94	-	5/16"	1"	2.29
PLBW U 3/4	3/4"-10	5500	1.69	3.11	1.77	2.17	0.98	1.5	5.43	1.18	-	5/16"	1"	2.38
PLBW U 7/8 1)	7/8"-9	8800	2.52	4.65	2.68	3.35	1.5	2.28	8.23	1.42	-	9/16"	1 3/8"	7.78
PLBW U 1 1)	1"-8	11000	2.52	4.65	2.68	3.35	1.5	2.28	8.23	1.57	-	9/16"	1 3/8"	7.89
PLBW U 1-1/8 1)	1-1/8"-7	13500	2.52	4.65	2.68	3.35	1.5	2.28	8.23	1.77	-	9/16"	1 3/8"	8.07
PLBW U 1-1/4 1)	1-1/4"-7	17500	4.17	7.4	4.25	5.2	2.36	3.58	13.03	2.13	-	3/4"	2 3/16"	32
PLBW U 1-3/8 1)	1-3/8"-6	22000	4.17	7.4	4.25	5.2	2.36	3.58	13.03	2.32	-	3/4"	2 3/16"	32.2
PLBW U 1-1/2 1)	1-1/2"-6	24000	4.17	7.4	4.25	5.2	2.36	3.58	13.03	2.72	-	3/4"	2 3/16"	32.8

Load Charts

Metric

Method of lifting
Number of legs				1	1	2	2	2	2	3+4	3+4	2	3+4
Angle of inclination				0°	90°	0°	90°	0 45°	45 60°	0 45°	45 60°	asymm°	asymm°
Code / Type		Thread (mm)	Fastening torque (Nm)	Load capacity (kg)
PLBW 0,3t		M8	6	500	300	1000	600	400	300	600	450	300	300
PLBW 0,6t		M10	10	1000	600	2000	1200	800	600	1300	900	600	600
PLBW 1t		M12	15	1300	1000	2600	2000	1400	1000	2100	1500	1000	1000
PLBW 1,3t		M14	30	2000	1300	4000	2600	1800	1300	2700	1900	1300	1300
PLBW 1,6t		M16	50	2500	1600	5000	3200	2200	1600	3400	2400	1600	1600
PLBW 2t		M18	70	3000	2000	6000	4000	2800	2000	4200	3000	2000	2000
PLBW 2,5t		M20	100	3500	2500	7000	5000	3500	2500	5300	3700	2500	2500
PLBW 3t		M22	120	4500	3000	9000	6000	4200	3000	6300	4500	3000	3000
PLBW 4t		M24	160	5500	4000	11000	8000	5600	4000	8400	6000	4000	4000
PLBW 5t		M27	200	6500	5000	13000	10000	7000	5000	10500	7500	5000	5000
PLBW 6,3t		M30	250	7000	6300	14000	12600	8800	6300	13200	9400	6300	6300
PLBW 8t		M33	270	9000	8000	18000	16000	11000	8000	16500	12000	8000	8000
PLBW 10t		M36	320	11000	10000	22000	20000	14000	10000	21000	15000	10000	10000
PLBW 12,5t		M42	400	13500	12500	27000	25000	17500	12500	26300	18700	12500	12500
PLBW 15t		M48	600	16000	15000	32000	30000	21000	15000	32000	22500	15000	15000

Imperial (UNC)

Method of lifting
Number of legs				1	1	2	2	2	2	3+4	3+4	2	3+4
Angle of inclination				0°	90°	0°	90°	0 45°	45 60°	0 45°	45 60°	asymm°	asymm°
Code / Type		Thread (inch)	Fastening torque (ft-lbs)	Load capacity (lbs)
PLBW U 5/16		5/16"-18	4.5	1100	660	2200	1320	900	660	1400	900	660	660
PLBW U 3/8		3/8"-16	7.5	2200	1300	4400	2600	1800	1300	2700	1900	1300	1300
PLBW U 7/16		7/16"-14	11	2800	2200	5600	4400	3000	2200	4600	3300	2200	2200
PLBW U 1/2		1/2"-13	11	2800	2200	5600	4400	3000	2200	4600	3300	2200	2200
PLBW U 9/16		9/16"-12	22	4400	3000	8800	6000	4200	3000	6300	4500	3000	3000
PLBW U 5/8		5/8"-11	37	5500	3500	11000	7000	4900	3500	7300	5200	3500	3500
PLBW U 3/4		3/4"-10	74	6600	5500	13200	11000	7700	5500	11500	8200	5500	5500
PLBW U 7/8 1)		7/8"-9	118	12000	8800	24000	17600	12300	8800	18500	13200	8800	8800
PLBW U 1 1)		1"-8	148	13000	11000	26000	22000	15400	11000	23000	16500	11000	11000
PLBW U 1-1/8 1)		1-1/8"-7	185	14300	13500	28600	27000	18900	13500	28300	20200	13500	13500
PLBW U 1-1/4 1)		1-1/4"-7	200	19800	17500	39600	35000	24500	17500	36700	26200	17500	17500
PLBW U 1-3/8 1)		1-3/8"-6	236	24000	22000	48000	44000	30800	22000	46200	33000	22000	22000
PLBW U 1-1/2 1)		1-1/2"-6	295	25000	24000	50000	48000	33600	24000	50400	36000	24000	24000
1) Safety factor 4
Safety factor 5, unless otherwise indicated by 1)  Important: Subject to technical changes!