US Fed Spec Alloy Steel Dee Shackles (D shackles)

Features: Capacities 1/3 thru 55 metric tons, forged - quenched and tempered, with alloy pin, working load limit permanently shown on every shackle, hot dip galvanized or self-coloured, fatigue rated, shackles can be furnished proof tested with certificates to designated standards; charged for proof testing and certification available when requested at the time of order.

Features: Forged quenched and tempered, with alloy pins. Hot dip galvanized or self-coloured. Fatigue rated. Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Shackles 85 metric tons and larger can be provided as follows: Non destructive tested, serialized pin and bow, material certification. Chemical certification must be requested at time of order.
Look for the Red Pin . . . the mark of genuine Crosby quality.

Available with capacities 1/2 thru 35 metric tons. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charged for proof testing and certification available when requested at the time of order.

Features:  Forged - quenched and tempered, with alloy pin. Working Load Limit permanently shown on every shackle. Hot Dip galvanized or self-coloured. Fatigue rated. Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20 degrees C.    Look for the Red Pin... the mark of genuine Crosby quality.