Lifting Equipment Suppliers UK : Industrial Lifting Equipment, Manual Handling Products & Lifting Gear - Crosby G210 / S210 Screw Pin Chain Lifting "D" Shackles (Dee Shackles) - Range from 330kg to 55000kg

Quick Ref: SPCS-2375

Home » Lifting Equipment Shop » Rigging Gear; Riggers Lifting Equipment » Crosby Lifting Equipment & Rigging Catalogue » Crosby Anchor Shackles (Bow and "D") » Crosby "D" Shackles, Dee Shackles / Chain Shackles » Crosby G210 / S210 Screw Pin Chain Lifting "D" Shackles (Dee Shackles) - Range from 330kg to 55000kg

Crosby G210 / S210 Screw Pin Chain Lifting "D" Shackles (Dee Shackles) - Range from 330kg to 55000kg

Model: Crosby G-210 S-210 / SPCS-2375

Showing 1 of 3

From £3.29 Buy / Quote
Description
Crosby General Info
Shackles Info
Imperial Specifications
Downloads
Show Images Hide Images

Crosby Screw pin chain shackles.

Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B20.26. Look for the Red Pin... the mark of genuine Crosby quality.

Capacities 1/3 thru 55 metric tons.
Forged - quenched and tempered, with alloy pin.
Working load limit permanently shown on every shackle.
Hot Dip galvanized or self-colored.
Fatigue rated.
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charged for proof testing and certification available when requested at the time of order.
Shackles are quenched and tempered and can meet DNV impact requirements of 42 joules at -20C.
Screw pin chain shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 2, except for those provisions required of the contractor.

Metric Dimensions

see imperial tab above for imperial specifications

Nominal Size (in.)	Working Load Limit (t)*	Stock No.		Weight Each (kg)	Dimensional Drawing	Dimensions (mm)										Tolerance +/-
Nominal Size (in.)	Working Load Limit (t)*	G-210	S-210	Weight Each (kg)	Dimensional Drawing	A	B	C	D	E	F	G	K	L	M	G	A
1/4	1/2	1019150	1019169	.05		11.9	7.85	6.35	6.35	24.6	15.5	22.4	40.4	4.85	35.1	1.50	1.50
5/16	3/4	1019178	1019187	.08		13.5	9.65	7.85	7.85	29.5	19.1	26.2	48.5	5.60	42.2	1.50	1.50
3/8	1	1019196	1019203	.13		16.8	11.2	9.65	9.65	35.8	23.1	31.8	58.5	6.35	51.5	3.30	1.50
7/16	1-1/2	1019212	1019221	.20		19.1	12.7	11.2	11.2	41.4	26.9	36.6	67.5	7.85	60.5	3.30	1.50
1/2	2	1019230	1019249	.27		20.6	16.0	12.7	12.7	46.0	30.2	41.4	77.0	9.65	68.5	3.30	1.50
5/8	3-1/4	1019258	1019267	.57		26.9	19.1	15.7	16.0	58.5	38.1	51.0	95.5	11.2	85.0	3.30	1.50
3/4	4-3/4	1019276	1019285	1.20		31.8	22.4	20.6	19.1	70.0	46.0	60.5	115	12.7	101	6.35	1.50
7/8	6-1/2	1019294	1019301	1.43		36.6	25.4	24.6	22.4	81.0	53.0	71.5	135	12.7	114	6.35	1.50
1	8-1/2	1019310	1019329	2.15		42.9	28.7	25.4	25.4	93.5	60.5	81.0	151	14.2	129	6.35	1.50
1-1/8	9-1/2	1019338	1019347	3.06		46.0	31.8	31.8	28.7	103	68.5	91.0	172	16.0	142	6.35	1.50
1-1/4	12	1019356	1019365	4.11		51.5	35.1	35.1	31.8	115	76.0	100	191	17.5	156	6.35	3.30
1-3/8	13-1/2	1019374	1019383	5.28		57.0	38.1	38.1	35.1	127	84.0	111	210	19.1	174	6.35	3.30
1-1/2	17	1019392	1019409	7.23		60.5	41.4	41.1	38.1	137	92.0	122	230	20.6	187	6.35	3.30
1-3/4	25	1019418	1019427	12.1		73.0	51.0	54.0	44.5	162	106	146	279	25.4	231	6.35	3.30
2	35	1019436	1019445	19.2		82.5	57.0	60.0	51.0	184	122	172	312	31.0	263	6.35	3.30
2-1/2	55	1019454	1019463	32.5		105	70.0	66.5	66.5	238	145	203	377	35.1	330	6.35	6.35

As advertised in Crosby General Catalogue 2009 Page 65, and previously in Crosby General Catalogue 2006 Page 61.

Imperial Table

Nominal Size (in.)	Working Load Limit (t)*	Stock No.		Weight Each (lbs.)	Dimensional Drawing	Dimensions (in.)										Tolerance +/-
Nominal Size (in.)	Working Load Limit (t)*	G-210	S-210	Weight Each (lbs.)	Dimensional Drawing	A	B	C	D	E	F	G	K	L	M	G	A
1/4	1/2	1019150	1019169	.11		.47	.31	.25	.25	.97	.62	.97	1.59	.19	1.43	.06	.06
5/16	3/4	1019178	1019187	.17		.53	.38	.31	.31	1.15	.75	1.07	1.91	.22	1.71	.06	.06
3/8	1	1019196	1019203	.28		.66	.44	.38	.38	1.42	.92	1.28	2.31	.25	2.02	.13	.06
7/16	1-1/2	1019212	1019221	.43		.75	.50	.44	.44	1.63	1.06	1.48	2.67	.31	2.37	.13	.06
1/2	2	1019230	1019249	.59		.81	.63	.50	.50	1.81	1.18	1.66	3.03	.38	2.69	.13	.06
5/8	3-1/4	1019258	1019267	1.25		1.06	.75	.63	.63	2.32	1.50	2.04	3.76	.44	3.34	.13	.06
3/4	4-3/4	1019276	1019285	2.63		1.25	.88	.81	.75	2.75	1.81	2.40	4.53	.50	3.97	.25	.06
7/8	6-1/2	1019294	1019301	3.16		1.44	1.00	.97	.88	3.20	2.10	2.86	5.33	.50	4.50	.25	.06
1	8-1/2	1019310	1019329	4.75		1.69	1.13	1.00	1.00	3.69	2.38	3.24	5.94	.56	5.13	.25	.06
1-1/8	9-1/2	1019338	1019347	6.75		1.81	1.25	1.25	1.13	4.07	2.69	3.61	6.78	.63	5.71	.25	.06
1-1/4	12	1019356	1019365	9.06		2.03	1.38	1.38	1.25	4.53	3.00	3.97	7.50	.69	6.25	.25	.13
1-3/8	13-1/2	1019374	1019383	11.63		2.25	1.50	1.50	1.38	5.01	3.31	4.43	8.28	.75	6.83	.25	.13
1-1/2	17	1019392	1019409	15.95		2.38	1.63	1.62	1.50	5.38	3.62	4.84	9.05	.81	7.33	.25	.13
1-3/4	25	1019418	1019427	26.75		2.88	2.00	2.12	1.75	6.38	4.19	5.78	10.97	1.00	9.06	.25	.13
2	35	1019436	1019445	42.31		3.25	2.25	2.36	2.10	7.25	5.00	6.77	12.74	1.13	10.35	.25	.13
2-1/2	55	1019454	1019463	71.75		4.12	2.75	2.63	2.63	9.38	5.68	8.07	14.85	1.38	13.00	.25	.25

Crosby-catalogue-page-number-65.pdf

(approx. 0.2Mb)

Crosby G210 (Galvanised) / S210 (Self-Coloured) Screw Pin Chain Lifting D Shackles

Type

Part N°	Nominal Size (in.)	Working Load Limit (t)*	Weight Each (kg)	Sale Price	Quantity	In-Stock
2375-T669 1019150	1/4	1/2	.05	(£ 4.02) £ 3.42		39
2375-T670 1019178	5/16	3/4	.08	(£ 4.02) £ 3.42		120
2375-T671 1019196	3/8	1	.13	(£ 3.80) £ 3.23		54
2375-T672 1019212	7/16	1-1/2	.20	(£ 4.28) £ 3.64		57
2375-T673 1019230	1/2	2	.27	(£ 5.50) £ 4.68		56
2375-T674 1019258	5/8	3-1/4	.57	(£ 7.13) £ 6.06		7
2375-T675 1019276	3/4	4-3/4	1.20	(£ 9.45) £ 8.04		61
2375-T676 1019294	7/8	6-1/2	1.43	(£ 14.04) £ 11.93		42
2375-T677 1019310	1	8-1/2	2.15	(£ 19.34) £ 16.44		20
2375-T678 1019338	1-1/8	9-1/2	3.06	(£ 27.35) £ 23.25
2375-T679 1019356	1-1/4	12	4.11	(£ 43.26) £ 36.77
2375-T680 1019374	1-3/8	13-1/2	5.28	(£ 53.14) £ 45.17
2375-T681 1019392	1-1/2	17	7.23	(£ 72.90) £ 61.97
2375-T682 1019418	1-3/4	25	12.1	(£ 145.60) £ 123.76
2375-T683 1019436	2	35	19.2	(£ 200.72) £ 170.61
2375-T684 1019454	2-1/2	55	32.5	(£ 352.56) £ 299.68
More information about shopping at SELS Buying / Quotation Help As you browse our catalogue, you will notice that some items are not priced which means they cannot be bought online, however the button 'Request Discounted Quote' is shown on absolutely every product within lifting safety and by pressing this button (example to the right), you can request a written and discounted quotation. Almost every quotation request we receive is sent out usually within the hour and with additional discount applied, even if the selected items are already discounted. Buying and Quotations Currently there are no limitations as to the number of products you can add to your quotation basket before you send it to us for processing, which means you dont have to mess around clicking for a quote multiple times. All you have to do to receive a quote is find the products which you require, add them to your basket, go to checkout, input your email address and then press send. Or you can call our office on +44 (0) 1977 684 600 then tell us what you need and we will do it for you. Baskets Buying online has now once again been enabled, so that when you have selected the items you require and go to the Checkout, you will be given a number of options depending on the contents of your shopping basket; Buy Now or Request Quote. Even when items are priced you will still be given the opportunity request a written quote, We strongly suggest you request a quotation for larger orders as we may be able to offer further discount.

NOTE: Pricing and specifications may be subject to change without notice. Prices shown may be UK only prices and therefore export pricing may vary dependant on location.
Images are for display purposes only.