Top
Lifting Equipment Suppliers UK : Industrial Lifting Equipment, Manual Handling Products & Lifting Gear - Tractel Steel Beam Lifting / Suspension Clamps - To Suit UB, RSJ, I Section or H Section
  Quick Ref: CN- 1792
Home » Lifting Equipment Shop » General Industrial Lifting Equipment » Lifting Clamps (Lifting & Pulling Applications) » Steel Section Lifting Clamps » Steel Beam Girder lifting / Suspension Clamps, UB, RSJ, "I" Section, "H" Beam. » Tractel Steel Beam Lifting / Suspension Clamps - To Suit UB, RSJ, I Section or H Section
Tractel Steel Beam Lifting / Suspension Clamps - To Suit UB, RSJ, I Section or H Section

Tractel Steel Beam Lifting / Suspension Clamps - To Suit UB, RSJ, I Section or H Section

Tractel TOPAL KP Semi-Automatic Clamp for Lifting Girders - 1500kg or 3000kg

1.  For lifting a girder by the flange while maintaining the web vertical.

This clamp is fitted with a safety spring mechanism allowing permanent contact of the cam on the load to be lifted, even when it is being laid down. This model is also equipped with automatic grasping ensuring the clamp closes when the plate or profile is positioned at the back of the clamp’s throat. The locking lever does not stick out to ensure that it cannot be damaged. The corrugated cam only marks one side of the load.

Model: Tractel TOPAL KP 

From £591.85 Buy/Quote

Tractel TOPAL PL Girder Clamp - Range from 1000kg to 4000kg

2.  PL girder clamp to horizontally lift I or H girders.

These grabs are designed to be used in pairs with a lifting beam. These accessories are fitted with an open position locking system allowing to lay down the load without any intervention on the clamp.
Model: Tractel TOPAL PL 

From £183.35 Buy/Quote

Tractel TOPAL GP Beam Clamp - Range from 1000kg to 10,000kg

3.  Beam Clamp with clamping and locking screw, can also be used to lift girders when used in pairs.

This clamp is designed to provide a permanent or semi-permanent suspension point on girders, to suspend hoists, lifting beams, pulleys, etc.  It can also lift girders when used in pairs with a lifting beam. These beam clamps are fitted with a screw allowing the locking in position for providing an hanging point. One of the arms slides, therefore allowing the easy positioning and clamping of the loaded beam clamp. The use is made easier thanks to a handle.
Model: TTG-3299 

From £174.80 Buy/Quote

To find out more about LiftingSafety or the type of equipment on offer, please see our lifting equipment shop or our height safety shop using the navigation provided at the top of every page.
All content © Selby Engineering and Lifting Safety 2006-2012. All rights reserved.