Miller Restraint Lanyards, Fall Prevention & Avoidance

Quick Ref: CN-1604
Miller Restraint Lanyards, Fall Prevention & Avoidance

1m, 1.5m & 2m Miller Restraint Lanyards with Many Karibiner Options. Complies to EN354.

Miller Fixed Fall Restraint Lanyard is a lightweight, versatile restraint and fall arrest lanyard designed to restrict the worker's movement to prevent him reaching a location where a fall hazard exists. 2-meter rope for work requiring limited movement and where there is a sufficient potential fall distance. Available with various end fittings : Loop & Karabiner, 2 Karabiners, 63mm Scaffold Hook and Karabiner, Snap Hook and Karabiner, 50mm Scaffold Hook and Karabiner. Available in sizes 1, 1.5 and 2m.

Miller Positioning Lanyard in Several Length Options with Optional Protector Sleeve. Complies to EN358.

Miller Reglex 3000 Adjustable Work Positioning Lanyard Complies to EN358. Available in several lengths 2, 3 and 4m with the option of a protector sleeve.

Miller Quality 2m, 3m & 4m Adjustable Lanyard for Work Positioning and Restraint. Jaw Type Adjuster. MC01, MC02 and MC03Complies to EN358.

Adjustable Fall Restraint and Work Positioning Lanyard for those who have to work at height in a safe and supported hands-free position. the lanyard is fitted to a supporting structure and then connected to the side D-rings on the operator's belt or harness. Available in sizes 2, 3 and 4m.

Miller Quality Automatic Rope Grab with Manual Mode For Restraint. For Vertical & Horizontal Use to EN353-2.

Miller MF52 Auto/Man Rope Grab is suitable for vertical, horizontal and sloping rope grab where the user locks the grab on the rope for restraint purposes, and repositions it manually along rope. Available for 10-12mm or 14-16mm. MF52 supplied complete with 0.3m lanyard and connector.

Miller 23mm Yellow Webbing Lanyard Designed to connect/disconnect to Anchorage Point without Assistance, Complies to EN354.

Lightweight, versatile restraint and fall arrest lanyards are designed for maximum protection. They are adapted for work that requires limited movement and where there is a sufficient potential fall distance. The Miller MD50 is a webbing extension for use on a harness' rear anchorage, which in turn allows the user to connect or disconnect to a fall arrest system without the need for any assistance.

Miller 25mm Polyester Webbing Lanyard for use with MA08/MA58 Harness Front Anchorage, Complies to EN354.

Short Connection Fall Arrest and Restraint Lanyards are lightweight, versatile restraint and fall arrest lanyards designed for maximum protection where limited movement is acceptable and where there is a sufficient potential fall distance. This is designed to be used only with the Miller MA08 or MA58 Harness front anchorage system; it is fitted with two Karabiners to enable easy and safe connection. Accredited to EN354.

Miller 12mm Polyamide Rope Lanyard for use with MicroLoc Rope Grab, Complies to EN354.

Short Connection Fall Arrest and Restraint Lanyards are lightweight, versatile restraint and fall arrest lanyards designed for maximum protection where limited movement is acceptable and where there is a sufficient potential fall distance. This is fitted with a galvanised steel connector (CS20), with an 18mm opening, for use with the MicroLoc rope grab. Accredited to EN354.

Miller Reglex Positioning Lanyard, in Several Length Options, with Optional Protector Sleeve. Complies to EN358.

Miller Reglex Adjustable Positioning Lanyard Complies to EN358. Available in several length options - 2, 3 and 4m. Optional protector sleeve also available.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top