Crosby Wire Rope End Sockets

Quick Ref: CN-1437
Crosby Wire Rope End Sockets

Crosby Open Spelter Sockets. Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of wire rope. Open Grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type A, except for those provisions required of the contractor. Available in various sizes, Forged Steel Sockets through 1-1/2", cast alloy steel 1-5/8" through 4".
Crosby Closed Spelter Sockets. Available in various sizes, with Forged Steel Sockets thru 1-1/2", and cast alloy steel sockets 1-5/8" thru 4". Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope.
Crosby S501 Open Swage Sockets. These swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC CHECK and permanent visual inspection opportunity. Forged from special bar quality carbon steel, suitable for cold forming. Hardness controlled by spheroidize annealing.
Crosby Closed Swage Sockets. Crosby Closed Swage Sockets are forged from special bar quality carbon steel, suitable for cold forming. Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC CHECK and permanent visual inspection opportunity.
Crosby Shank Hooks for Swaging. The Crosby S-319 swaging shank hook utilizes standard Crosby 319N shank hooks with interlocking hook tip. Each hook has a pre-drilled cam which can be equipped with a latch. They have a black oxide finish on body (Shank is uncoated). Wide range of sizes available. Working Load Limit: 0.4-14 tons. Wire Rope sizes: 3/16" thru 1-1/8". Swage shank hook terminations have an efficiency rating of 95%. Quenched and Tempered. Heat treat process allows for ease of swaging.
Crosby Wedge Sockets. Includes Socket, Wedge, Pin and Wire Rope Clip.

On the Crosby S421 Wedge Sockets, the pin diameter and jaw opening allows the wedge and socket to be used in conjunction with open swage and spelter sockets. It secures the tail or "dead end" of the wire rope to the wedge, thus eliminates loss or "Punch out" of the wedge.
Eliminates the need for an extra piece of rope, and is easily installed.

Crosby Utility Wedge Sockets. The US422T Wedge socket terminations have an efficiency rating of 80%. The wedges are color coded for easy identification: Blue - largest wire line size for socket; Black - mid size wire line for socket; Orange - smallest wire line size for socket.
Cast into each socket is the name "McKissick", "Crosby" or "CG", its model number and its wire line range.

Crosby Button Spelter Sockets. Crosby Button spelter sockets are designed for use with mobile cranes, used to terminate high performance, rotation resistant ropes, and standard 6 strand ropes, with rope sizes from 1/2" to 1-1/2". Both the Sockets and buttons are re-usable.  Button Spelter terminations have a 100% efficiency rating, based on the strength of the wire rope. Easy to install assembly utilizes Crosby WIRELOCK socketing compound. Replacement buttons and sockets are available.
Crosby Mooring Sockets. Crosby Mooring Sockets are available in many sizes, for wire line 2" through 3-5/8". They are designed for today's higher strength classes of wire rope and utilise several features to stop the cone from rotating. "M-Line" socket terminations have a 100% efficiency rating, based on the catalogue strength of the wire rope. Galvanized finish. Design of bail allows for easy connection to shackles and other connecting links.

Crosby wedge socket designed especially for high performance rope. The Crosby S-423T Super TERMINATOR™ is the first wedge socket designed to take advantage of the performance properties associated with high performance, high strength, compacted strand, rotation resistant wire rope. 

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top