Crosby Wire Rope End Fittings
LiftingSafety offer a full and comprehensive range of high quality wire rope end fittings.
This category contains an excellent choice of Crosby wire rope fittings that include an wire rope grips (bulldog grips) of many different designs, materials (galvanised and stainless steel) and safe working loads (capacities). All the equipment marketed here is for the manufacture of wire rope assemblies for lifting and pulling applications.
We offer a variety of Crosby wire rope fittings including Crosby Red U-bolt Clips and forged Fist Grips (clips) meet or exceed US Fed spec FF-C-450, otherwise known as Bulldog grips or wire rope grips. For lifting and pulling applications. The entire Crosby clip is galvanised for corrosion resistance. Crosby can provide traceable material analysis. Crosby professional rigging tackle and lifting gear is second to none for quality and product range
- All Crosby lifting equipment dimensional drawings show tables with metric and imperial measurements.
- Also in this category wedge sockets, spelter sockets, mooring sockets; swaging sleeves, sockets and hooks.
Crosby G450 Forged Wire Rope Clips Bulldog Clips - Rope Sizes Ranging 3mm to 90mm
Product Images
Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or "CG", and a size forged into it. The entire Clip is Galvanized to resist corrosive and rusting action and all Clips are individually bagged or tagged with proper application...
- Model: Crosby G-450
Crosby G429 Fist Grip Wire Rope Clips, Bulldog Grips - Rope Sizes Ranging 5mm to 40mm
Product Images
Fist Grip Clips are forged, and the entire clip is galvanized to resist corrosive and rusting action. The double saddle design eliminates the possibility of incorrect installation. Wire rope sizes range from 3/16" through 1-1/2", all sizes have forged steel saddles....
- Model: Crosby G-429
Crosby SS450 Forged Wire Rope Clips, Bulldog Grips - Rope Sizes Ranging 3mm to 16mm
Product Images
Entire Stainless Steel Wire Rope clip is made from 316 Stainless Steel to resist corrosive and rusting action and each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or "CG", and a size forged into it. All components are Electro-Polished. All Clips are...
- Model: Crosby SS-450
Crosby G416/S416 Open Spelter Sockets - Range from 4500kg to 875,000kg
Product Images
Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of wire rope. Open Grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type A, except for those provisions required of the contractor. Available in various sizes, Forged Steel Sockets...
- Model: Crosby G416 / S416
Closed G417/S417 Spelter Sockets - Range from 4500kg to 1,005,000kg
Product Images
Available in various sizes, with Forged Steel Sockets thru 1-1/2", and cast alloy steel sockets 1-5/8" thru 4". Spelter socket terminations have an efficiency rating of 100%, based on the catalogue strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP...
- Model: Crosby G-417 / S-417
Crosby Open S501 Swage Sockets - Range Available for 6mm to 48 - 52mm Rope Size
Product Images
These swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC CHECK and permanent...
- Model: Crosby S-501
Crosby Closed S502 Swage Socket - Range Available for 6mm to 48 - 52mm Rope Size
Product Images
Crosby Closed Swage Sockets are forged from special bar quality carbon steel, suitable for cold forming. Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension. Before swaging, this provides for an obvious visual difference in the shank...
- Model: Crosby S-502
Crosby S319SWG Shank Hooks for Swaging - Range from 400kg to 14,000kg
Product Images
The Crosby S-319 swaging shank hook utilizes standard Crosby 319N shank hooks with interlocking hook tip. Each hook has a pre-drilled cam which can be equipped with a latch. They have a black oxide finish on body (Shank is uncoated). Wide range of sizes available. Working Load Limit: 0.4-14 tons. Wire Rope sizes:...
- Model: Crosby S-319SWG
Crosby S421 Wedge Sockets - Range available for 9 - 10mmm to 30 - 32mm Rope Size
Product Images
On the Crosby S421 Wedge Sockets, the pin diameter and jaw opening allows the wedge and socket to be used in conjunction with open swage and spelter sockets. It secures the tail or "dead end" of the wire rope to the wedge, thus eliminates loss or "Punch out" of the wedge.Eliminates the need for...
- Model: Crosby S-421T
Crosby Utility US422T Wedge Sockets - Range Available for 3/8in to 1-1/4in Rope Sizes
Product Images
The US422T Wedge socket terminations have an efficiency rating of 80%. The wedges are color coded for easy identification: Blue - largest wire line size for socket; Black - mid size wire line for socket; Orange - smallest wire line size for socket.Cast into each socket is the name...
- Model: Crosby US-422T
Crosby Button SB427 Spelter Sockets - range available for 13mm to 38mm rope size
Product Images
Crosby Button spelter sockets are designed for use with mobile cranes, used to terminate high performance, rotation resistant ropes, and standard 6 strand ropes, with rope sizes from 1/2" to 1-1/2". Both the Sockets and buttons are re-usable. Button Spelter terminations have a 100% efficiency...
- Model: Crosby SB-427
Crosby G517 Mooring Sockets - Range from 113,000kg to 907,000kg
Product Images
Crosby Mooring Sockets are available in many sizes, for wire line 2" through 3-5/8". They are designed for today's higher strength classes of wire rope and utilise several features to stop the cone from rotating. "M-Line" socket terminations have a 100% efficiency rating, based on the catalogue strength of the wire...
- Model: Crosby G-517
Crosby S423T Super Terminator Wedge Socket - Range Available for 14 - 16mm to 30 - 32mm Rope Size
Product Images
The Crosby S-423T Super TERMINATOR™ is the first wedge socket designed to take advantage of the performance properties associated with high performance, high strength, compacted strand, rotation resistant wire rope.
- Model: Crosby S-423T
Crosby S409 COLD TUFF Swage Buttons - Range Available 3mm to 32mm
Product Images
Cold Tuff Buttons are made from Special processed, low carbon steel. "COLD TUFF " for better swageability. These swage button terminations have an efficiency rating of 98% based on the catalogue strength of wire rope.
- Model: Crosby S-409
Crosby S505 Nat. Steel Swaging Sleeves - Range Available 6mm to 114mm
Product Images
Standard Steel Sleeve terminations have efficiency ratings as follows based on the catalogue strength of wire rope. The QUIC-PASS swaging system allows "Flemish style" wire rope terminations to be swaged in only two passes. Resulting in a 50-75% reduction in the number of passes required with conventional swaging...
- Model: Crosby S-505
Crosby S506 National Swage Duplex Swage Sleeves - Range Available from 8mm to 32mm
Product Images
"Cold Tuff " for better swageability, made of Special processed low carbon steel which Resists cracking when swaged (equals or exceeds stainless steel sleeves). For turnback wire rope splicing. Turnback terminations have efficiency ratings of 94% based on the catalogue strength of wire rope. Designed...
- Model: Crosby S-506
Crosby W4167 Wirelock Swaging Compound - Range from 100cc to 2000cc
Product Images
For use on 416, 417, 427 & 517 spelter sockets only. 100% termination efficiency. Temperature operating range is -65 F to +240 F. Ideal for on-site applications. No hazardous molten metal. Improved fatigue life. Pouring temperature without booster pack is 48 F to 110 F.
- Model: Crosby W416-7
Crosby Hydraulic Swaging Presses - Range from 500,000kg to 1,500,000kg
Product Images
This is a dual hydraulic system which combines the use of high speed and low pressure to bring dies into position; and the low speed and high pressure necessary for ideal swaging control. Adjustable tonnage control, so tonnage can be set to match die block Working Load Limit.
Vertical swage action...
- Model: HSP-2372
