Search Results for "Yale"- 141 items found

Not the results you were looking for? Try broaden your search terms and avoid using plurals!
Yale Push Travel Trolley / Beam Clamps.

The Yale CTP boasts easy fitting to overhead beams for the attachment and transport of loads. The central threaded spindle provides quick adjustment to the required beam width, locking lever secures the adjustment. The Threaded spindle and clevis are zinc plated for added corrosion protection. The easy installation to any beam makes the CTP suitable for fixing to any hoists, pulleys and loads you wish to move. It can be adjusted quickly to the beam width by turning the main spindle. Safety is ensured by the special locking lever. The spindle and snap-pin stops are galvanised to protect against corrosion. It is suitable for man riding applications.



Yale Standard Beam Clamps.

Provides a quick and versatile rigging point for hoisting equipment, pulley blocks or loads. Flexible application due to wide adjustment range. The central threaded spindle allows easy attachment and a safe and secure grip so it doesn't slack.

Optionally can be supplied as a beam clamp with a shackle.

Yale YC92 Beam Clamp With Shackle. Provides a quick and versatile rigging point for hoisting equipment, pulley blocks or loads and comes complete with a locking device and is supplied with a shackle. Flexible application due to wide adjustment range. The central threaded spindle allows easy attachment and a safe and secure grip. This clamp comes complete with shackles and is also available as a standard beam clamp
Cable Pulling Machine Y08, Y16 and Y32. A Quality Yale alternative to the Tractel versions.

The wire Rope used for lifting and pulling fused and tapered at one end and the other end is terminated with a Crosby eye hook in heart shaped thimble secured by a mechanical splice. The Yaletrac is our reasonable quality alternative to the Tractel Tirfor products which we also offer. We consider it to be a good second best. Yaletrac® cable pullers feature a lightweight, compact, high strength aluminium housing, smooth contour design with a large, flat bottom surface for increased stability in horizontal and vertical working positions.

Available in 800kg, 1600kg and 3200kg capacities.

Yale LM Cable Pullers

A device for gripping, pulling and tensioning of unsheathed wire ropes, cables and metal rods, depending on the rope diameter and surface integrity, up to a tensile strength of 1770N/mm2.
Pulling force 2000 - 5000 daN

The Yale LM range of cable pullers are for pulling and tensioning only and must not be used for lifting application.

 

Yale Cable Pullers and Grips. Yale Cable Pullers / Cable Grips are available with a Pulling Force 2000, 3000 & 5000 daN. The Yale LMG is a device for gripping, pulling and tensioning unsheathed wire ropes, cables and metal rods in all forms. The parallel jaws provide a firm, non-slip grip without causing damage to the wire. A special spring-loaded guide prevents the grips from dropping off the wire and affords instant release without jamming. The model LMG-II-X is supplied with grooved jaws for use on wires with tensile strength of up to 19.60 N/mm2.
Yale's premium Heavy Duty Pressed Steel Body Ratchet Lever Hoist.

Hoist Features: The new generation of ratchet lever hoists model PT features improved techniques and is ergonomically styled.
The advantages of the predecessor range have been maintained and further optimized. The proven stamped steel housing provides extremely low weight without limiting the reliability and sturdiness of the unit. Available in sizes 800kg, 1600kg, 3200kg and 6300kg.

Economical Robust Pressed Steel Body Lever Hoist from Yale lifting.

Hoist Features: A hand lever hoist with a robust stamped steel construction and compact design. The Yale UNO lever hoist comes equipped with a hard chromium plated hand wheel and a sturdy bottom block with encapsulated bolt connections. Available in sizes 750kg, 1500kg, 3000kg, 6000kg.

Yale Manual Hoist with 360 degree Hand Wheel with options for Corrosion Resistant Units.

The 'unique feature' of the Yale (YaleLift) 360 range of hand hoists is that the hand chain wheel and guard rotate through a 360 degree, which is an excellent user friendly safety feature which means the operator can hoist a load while out of the danger zone (under the load).

A top quality hoist that is durable with available sizes 500kg, 1000kg, 2000kg, 3000kg, 5000kg, 10,000kg and 20,000kg.

Yale 115v, 230v or 400v, single or twin speed electric powered (motorised) beam trolley. The VTE has a compact, robust frame with low overall height.Suitable for almost all hoists with suspension hook due to Yale's universal shackle connection.Travel motor with worm gear transmission ensures smooth start and self braking - a separate motor brake is not required. Specially recommended for loads over 1000kgs, for transporting over long distances and/or for frequent use.

 


Yale Load Binders with Grab Hooks or Eye each End from 4000 to 10600 daN. Yale RLSP load binders with lashing capacities from 4000 to 10600 daN. A load binder is a universal tool to restrain and secure loads and freight. The manual operation of the Yale RLSP load restraint lever extends or retracts the threaded spindles, which in turn tightens the restraint. Tension is then upheld by the self-locking threads. Yale load binders can be fitted with parallel hooks for direct attachment to chains or with clevis ends for use with existing fastening devices.
Heavy duty Yale Electric Chain Hoist, Comprehensive range, Hook suspended, manual (push/geared) or powered (electric/motorised) trolley.
Yale Low Maintenance Pneumatic Air Chain Hoist.

The smaller 125kg to 990kg comes with chain collector bag and single fall load chain, 3 metre lift height and pendant control supplied as standard. These units excel through their extremely quiet operation and robust aluminium housing, low and easy maintenance due to reduced number of components, lightweight design and low headroom and the hoists are very handy and easy to carry.

 

Yale Steerman Premium Load Moving Skates.

Yale SX Skates Professional Nylon Skates are available in the following sizes - 10,000kg, 20,000kg, 30,000kg, 60,000kg, 100,000kg.

Designed for the professional load mover, these systems have been developed over a number of years to ensure total ease of operation and maximum safety. Steerman load moving skates comprise of a steerable front section and a pair of adjustable rear trolleys.

Yale Steerman tank track type load moving machinery skates.

Yale SCS Caterpillar Skates are available in the following capacity sizes - 20,000kg, 30,000kg and 60,000kg.

Steerman Caterpillar Skates provide an economic and robust solution to many load moving and placement problems. The modular concept allows linking of units, with robust lockable steel container with nylon castors.

Yale Roller Pinch Bars at 1.5 tonne and 5 tonne capacity. Used to Raise a load to insert a toe jack.

Available in 2 models, either the 1500kg or the 5000kg model.

Yale Universal Bottle Jacks. Value for money from Yale, a reputable lifting equipment manufacturer. Features include SWL's from 2 to 50 tonnes and designed to be robust for long-life fitted with a pressure relief valve. Precise controlled lowering. An Additional screw extension is fitted to the piston (from 2 to 20 tonnes) for extra height if lift. They have a grooved saddle and large base plates for increased stability.
Yale 1000kg Folding Floor / Workshop / Engine Crane. Our Yale economy folding floor cranes (engine cranes / garage crane) offer a cost effective lifting solution suitable for numerous light duty lifting applications when customers are working to a tight budget. Not to be confused with our Heavy Duty Folding Floor Cranes, these are not anywhere near the same quality of construction, we do not recommend these folding floor cranes for industrial use, DIY use only
Yale Compact Low Headroom Trolley Hoist Combination.

Options on Compact Trolley Hoist : Safe Working Load, Trolley Type, Chain Collector Bags, Trolley to fit Beam Size (mm) (e.g 152), Height of Lift (m).

All-steel construction with zinc-plated load and hand chains. All units are built to order for a predetermined beam dimension.

Anti-drop devices and anti-tilt devices are standard features. VNR series offers minimum headroom and maximum usage of the available room height.

Yale Low Head Room Swivel Truck Push/Geared Trolley with Extremely Short Radius Curve. The manual trolley series VLH features extremely low headroom. The swivel truck construction allows negotiation of very short radius curves. All-steel construction with low headroom. The swivel truck feature permits application on runways with very short radius curves. All units are variably adjustable to individual beam sizes. Anti-drop devices and anti-tilt devices are standard features. All geared (VLHG) units come complete with 2.4 metre HCD (hand chain drop) as standard to suit 3m HOL (height of lift).

 

CM Shopstar / Yale Electric Chain Hoist, Top Hook Suspension, Lightweight, 110v, 230v or 400v - 1Ph or 3Ph.

A small and light weight (only 12kg when 3m HOL) Industrial quality electric chain hoist. Electrical protection to IP54 as standard with low voltage pendant control and overload protection. Smooth operation. Thermally protected hoist duty motor with dual braking system and rugged cast aluminium alloy hoist frame, 5:1 factor of safety yet small, compact design for industrial applications. Hardened forged steel latch-style lower hook rotates 360°.

Yale RPE electric wire rope hoisting. (Rope NOT Included as standard) Features of Electric wire rope winch: Compact dimensions due to internal brake motor, adjustable slip clutch to protect the winch from overloading and spring pressure disc brake built in to the motor holds the load secure in the event of a power failure.
Yale permanent lifting magnets for round or flat materials handling.

Yale TPM load lifting magnets are ideal tools for easy, quick and thus economical transport of heavy objects made from ferro-magnetic material. The Small dimensions of the units provide a wide number of additional applications. The load is not affected mechanically which allows lifting of flat as well as round material. The efficient magnet body provides strong lifting capacity at low dead weight. The permanent magnets do not require electric energy and will present only minor residual magnetism after switching off. Switching ON and OFF operations are easily accomplished by turning a locking lever. In activated condition the hand lever will be safely locked and thus prevent unintended demagnetising.

Yale LX Economy 'Low Cost' Load Moving Skates.

Yale LX Basic Load Moving Skates are available in the following sizes - 6t or 12t.

These three point loading systems comprise of a steerable front and a pair of adjustable rear skates. The heavy load moving systems are supplied ready-to-use.

Yale tool spring balancers with anti wear feature protecting aluminium housing.

The Yale Spring Balancer is Available with different maximum loads :

Standard Length : 0.5-200kg available in various capacity steps with a 1.5m Lift.

Extended Length : 1.5kg-130kg, also available in various different capacity steps with a 2.5m Lift.

Yale tool spring balancers with an additional safety-device and anti wear feature protecting aluminium housing.

The Yale Spring Balancer with Integrated Fall Arrestor has a variety of different max loads and lifts :

Standard Length : 9kg-15kg(1.3m Lift), 15kg-22kg, 22kg-30kg, 30kg-40kg, 40kg-50kg, 50kg-60kg, 60kg-70kg(1.5m Lift).

Extended Length : 9kg-15kg, 15kg-22kg, 22kg-30kg, 30kg-40kg, 40kg-50kg, 50kg-60kg, 60kg-70kg(2.3m Lift).

Yale heavy-duty tool spring balancers for the most demanding of applications.

Yale Spring Balancer with Spring Failure Device and Overload Protection has many different max loads and lift :

Standard Length : 200kg-225kg, 225kg-250kg, 250kg-275kg, 275kg-300kg(1.5m Lift).

Extended Length : 85kg-100kg, 100kg-120kg, 120kg-140kg, 140kg-160kg(3m Lift).

Yale braked beam trolleys fitted with a manual brake (Track Clamp) available as push travel or geared travel (chain drive). The locking beam trolley incorporates a threaded locking pin connected to a chain wheel. A loop of hand 'pull chain' wraps over the chain wheel and down to the operator below. Pulling the hand chain turns the threaded locking pin. Pull the chain clockwise to lock the pin against the steel beam (put the brake on), turning anticlockwise releases the pin (takes off the brake).

When the trolley is fitted to the beam the user adjusts the 'Take-up screws' to approx 1mm from the underside of the lifting beam. When the locking pin is tightened the 'Take-up' pins will be forced to clamp against the underside of beam, resulting in a three point clamp.

Yale low profile and flat hydraulic lifting / jacking cylinders with spring return. These products are high powered, portable and light weight perfect for those tight spaces. The cylinder body and piston are made from quality chromium-molybdenum steel.
Yale Single-acting pulling ram cylinders with spring return. This product is Yale chromo-design. Can be operated in all positions. Comes with carrying handle and piston protection cover. including female coupler half model CFY-1
Yale single acting hydraulic cylinders with safety locking nut and gravity return.

This product is made from hard chromium-plated piston with trapezoid thread. It has generous guiding bands to ensure a robust piston guiding and the overflow hole ensures a definite piston end stop, interchangeable hardened saddle. Includes female coupler half.

Yale single stage and 2 stage, single acting hydraulic hand pumps made from a robust steel construction. Yale single acting cylinder hydraulic hand pumps. Two stage operation with automatic switch over. Oil capacities available from 300cc to 10000cc.
Yale 2 stage, double acting hydraulic hand pumps made from a robust steel construction. Yale double acting hydraulic cylinder hand pump, with a four-way valve and relief valve. Oil capacities available from 700cc to 10000cc.
Yale hydraulic aluminium foot pump designed to operate single-acting hydraulic cylinders. This product is used for single acting hydraulic cylinders.
Yale HH durable, flexible thermoplastic hydraulic hoses

HH durable, highly flexible thermoplastic hydraulic hoses. High safety factor, with a burst pressure of 2800 bar.

Yale GGY glycerine filled, stainless steel housing pressure gauge Yale pressure gauge; for use when the operating pressure needs to be monitored. To absorb pressure shocks the gauge is glycerine filled which contributes to a long service life.
Yale pressure gauge suitable for connection to all hps hand pumps Yale GYA pressure guage suitable for connection to all HPS hand pumps.
Yale pressure gauge adaptor suitable for all HPS hand pumps. Yale GY pressure gauge adaptor suitable for connection to all Hps hand pumps. Gauge connection with sleeve nut and 30 degree angle for easy reading.
Yale pressure gauge adaptor suitable for all HPH hand pumps Yale GA pressure gauge set for all HPH hand pumps
Yale hydraulic pressure switch. This precision adjustable pressure switch can be set to any pressure value between 5 and 700 bar by means of a screwed adjuster.
Yale pressure relief valve.

Pressure relief valves are used when the system pressure (force of the connected hydraulic cylinder) should not exceed a certain value. After achieving the set pressure, the excessive oil is guided back to the reservoir.

Yale hydraulic manifold with shut off valve to maintain pressure ratios in each line individually. Manifolds with shut off valves are used when different pressures must be maintained in each hydraulic line.
Yale MY hydraulic manifold to use several cylinders from a single hydraulic pump. Manifolds are used when several hydraulic cylinders have to be connected to one hydraulic pump.
Yale hydraulic manifold with shut off valve and pressure gauge to maintain pressure ratios in each line individually. Manifolds with shut off valves are used when different pressure must be maintained in each hydraulic line.
Yale retractable "self retracting lifeline" (SRL) fall arrest block with zinc galvanised steel rope. Conforms to EN360. Yale fall arrest block with zinc galvanised steel rope ranging from 6M - 28M all cable diameter of 4mm. Lightweight 6m webbing fall arrest block with aluminium snap hook swivel connector & fall indicator. Fitted as standard with fall indicator in connector. Features Plastic housing Zinc-galvanised steel rope (diameter 4 mm). Rope lengths between 6 and 28 m. End connection:screw gate snap hook AXK 10 Sl, opening 23 mm and fall indicator.
Yale fall arrest block retractable "self retracting lifeline" (SRL) with abrasion proof webbing with energy absorber. Complies to EN360

Yale HSG-G Fall Arrest Webbing Block is fitted as standard with fall indicator in connector. Abrasion-proof 20mm, 45 mm wide webbing with energy absorber. With end connections:1 x screw gate snap hook, opening 18 mm, 1 x screw gate snap hook AXK 10 S, opening 22 mm. Available in two lengths 2.25m or 6m.

Yale Roofers kit with certificate of conformity.

Yale Roofers Restraint Height Safety Kit Comprises of : 1 two point harness, 20 metre of kernmantle rope, 1 rope grab, 1 shock absorber, 1 600mm anchor sling, 1 carrying case and Certificate of conformity.

Yale Basic Kit.

Yale Fall Arrest Lanyard Basic Kit contains 1 single point harness, 1 two metre shock absorbing rope lanyard, 2 Screwgate snap hooks and 1 certificate of conformity.

Yale Scaffolders kit with 2 metre shock absorbing rope lanyard.

Yale Scaffolders Fall Arrest Lanyard Kit consists of 1x Single point harness, 1x 2 Metre shock absorbing rope lanyard with Scaffold hook, 1x Screw gate snap hook, 1 x Kit bag and 1x Certificate of conformity

Yale "Kit 5" Height Safety Kit

Each kit contains: 1 x Two Point Harness 1 x 10 metre fall arrest block 1 x 600mm anchor sling 1 x carrying case 1 x certificate of conformity.

Yale 1.5m or 2m Single Leg Webbing Lanyard with shock pack for fall arrest applications.
Yale man-riding and rescue winch with automatic break specifically designed for lifting people. Personel hoist with cable diameter of 6.3mm and a working load limit of 180kgs. (Net weight 13kgs) The man-riding hoist is available in two sizes with 20m or 25 metre cable length and Conform to EN1496This unit is designed for the descent and ascent of a worker in a confined space. It has a built in fixing plate, so is simple to fit to the tripod. 
Yale rescue from height kit.for raising and lowering of a casualty This yale Rsuce Kit comes supplied with 11mm diameter working rope, 3x snap hooks, Webbing sling, Knife and kit bag.
Yale's entry level (medium duty) chain block, which supersedes the VS Plus.
Yale Riggers Harness 5 Point Full Body Riggers Harness.

Five point full body harness

conforms to EN361, EN358 and EN813

Extra Heavy Duty Pul-Lift / Lever Hoist for heavy industrial applications.

Extra Heavy Duty Pull-Lift Lever Hoist. Model D85 with Zinc Plated Link Chain. It features ratchet lever hoists for lifting, pulling, lashing and tensioning. Other features include: Overload protection devices are available on the 750kg to 6000kg units. 1.5 metre lift height supplied as standard, enclosed housing with housing cover, hand lever and lower block made from high tensile white malleable cast iron for an overall rugged construction and a zinc plated link chain. Available in sizes 750kg, 1500kg, 3000kg, 6000kg and 10,000kg.

Alloy Lever Hoist with very fine ratchet lifting mechanism for operation in confined spaces

Hoist Features: The enclosed housing, hand lever and hand wheel are made from high quality aluminium, due to precise needle bearings the hoist can be operated with little effort, its low weight is an advantage when the hoist has to be frequently carried over longer distances to different assignments. This universal ratchet hoist should not be missing in any service truck and the chain guide is cast into the body to ensure faultless chain movement. Available in sizes 750kg, 1000kg, 1500kg, and 3000kg.

Extremely Lightweight and Compact pressed steel ratchet Lever hoist. Hoist Features: Drop forged hooks, free-chaining device as standard, extremely low headroom hoist, high tensile zinc plated link chain (load chain) amd a hand lever with rubber grip. This hoist is the smallest, lightest Yale ratchet lever hoist (ratchet chain puller) for professional applications. Due to the multitude of application possibilities this new ratchet lever hoist is an indispensable tool e.g. in industry, trade and service. The extreme low tare weight and the very compact design make the hoist easy to use even in confined working conditions...
Push and Geared Travel (chain drive) Beam Trolleys with optional track clamp (locking device)

This beam trolley enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment. It has excellent controlling features due to machined steel wheels mounted on pre lubricated, encapsulated ball bearings.

The HTP/HTG beam runners are adjustable to fit a wide range of beam widths and profiles. The trolley wheels are designed for a max. beam profile incline of 14%. Adjustments are made by rotating the clevis load bar which also ensures the centred positioning of the hoist in the clevis - no creeping to the left or the right. Anti-tilt and wheel fracture support devices are standard.

Low Headroom Combination Chain Hoists with 360 degree Handwheel and Push Trolley.

The Yale 360 Yalelift ITP is a 360° hoist, solid mounted on to a Yale push travel trolley with a 3 metre lift height supplied as standard and corrosion resistant trolleys are available.

Capacities available: 500kg, 1 tonne, 2 tonnes, 3 tonnes and 5 tonnes.

Close Headroom Combination Chain Hoist with 360 degree Handwheel and Geared Trolley.

The Yale 360 Yalelift ITG is a 360° hoist, solid mounted on to a Yale geared travel trolley. It has a 3 metre lift height supplied as standard and corrosion resistant trolleys are available.

Capacities available: 500kg, 1 tonne, 2 tonnes, 3 tonnes, 5 tonnes and 10 tonnes.

Electric Hoist - 3 Phase with optional geared, push or electric powered (motorised) trolley or hook/lug suspended.

Features include load sprocket and chain guide that can be easily inspected or removed without disassembly of the complete unit; it is designed to FEM 1Am. and have main line contactor for increased safety. As standard Yale offer a 2 year warranty (excluding wear parts) and a lifetime lubricated gearbox. Thermal overload protection is a standard feature on the whole range. Optimised housing for improved cooling. The Duty cycle 50% ED for single speed. Electromagnetic spring pressure brake holds the load safely even in the event of power failure.

Lodestar (Loadstar) Electric Chain Hoist Single Phase 110v and 230v or Three Phase 400v. Hook suspended or with trolley (manual, geared or electric (powered/motorised)).

CMLS Single or Three Phase Hoist is a top quality electric chain hoist renowned the world over. The Lodestar is a tough, durable electric chain hoist, designed to keep working in the most arduous conditions. Features include 50% duty rating (30 minutes continuous use per hour). Overload protection and heights of lift up to 60 metres are available.

Capacity available: 250kg, 500kg, 1000kg, 2000kg and 3000kg with hook suspension or with manual trolley or electric power travel trolley.

Lightweight Aluminium Hydraulic Jacks.

Yale lightweight alloy lifting jacks come with the optional toe, lifting strokes are 75 to 305mm.

Available in capacities of 6500kg, 10,000kg, 20,000kg, 30,000kg, 60,000kg, and 100,000kg.

Steerman Hydraulic Toe Jacks.

Steerman hydraulic toe jacks are ideal when working in very confined spaces and they also have an extremely low toe height though the greatest feature is that these high quality toe jacks are rated 100% SWL on the toe (IE the same as on the head)

Capacity not reduced when lifting off the toe and often used for lifting and positioning of heavy machinery, fabricated steel structures and general engineering applications. A perfect compliment for use with Steerman skates.

Swivel Truck Low Headroom Trolley Hoist Combination.

Options on Low Headroom Hoist : Safe working load, trolley type, height of lift (m), chain collector bags, overload protection, trolley to fit beam size (mm). The hand chain hoist series VLR with integrated manual trolley drive features extremely low headroom capabilities and provides optimal usage of the available storage space in confined areas. The swivel truck feature of the trolley suspension enables travelling on extremely short radius curves.

 

Wire rope winch. (54m (250kg) / 38m (500kg) cable length)

The Yale RPA pneumatic winch has a 100% duty rating with an unlimited number of starts, which makes it very suitable for heavy duty winching applications. Another major feature of the RPA winch is that it is unsusceptible to contamination, humidity or other aggressive mediums while in use outdoors.

Features:    Robust rotating piston motor with high starting torque, designed for operating pressures 4 to 6 bar;    Spring pressure disc brake incorporated in the motor holds the load secure even in the event of an air failure;    Sensitive control by means of direct acting valves in the control switch;    NOT supplied with an emergency stop button.
Options:    Different drum designs,

Ultra Low Headroom Chain Hoist with Push or Geared Trolley. Corrosion and Spark resistant options available.

The YaleLift LH hoist series are available with a geared trolley or push trolley with options for standard finish, corrosion resistant or with a spark resistant finish. The combination of the Yale low headroom hand chain hoist with integrated push trolley or geared trolley.

Capacities Available: 500kg, 1 tonne, 2 tonnes, 3 tonnes, 5 tonnes and 10 tonnes (geared only).

Spark Resistant Hand Chain Hoist with single or 2 fall chain.

Spark Protection Features : Stainless steel load and hand chain, units completely corrosion resistant, bronze plated suspension and load hooks, solid bronze trolley wheels, rubber buffers and chain containers for increased spark resistance. Anti-tilt and anti-drop devices are standard. Ideal for applications with low ceiling and limited headroom.

All units of this series up to a capacity of 3000kg are provided with a single chain fall and the minimum headroom has been further reduced.

Spark Resistant Chain Hoist with Integral Push Trolley.

This product is the same as Yalelift 360 SR, but on a Push Trolley. It is provided with the following for extra spark protection: stainless steel hand chain, units completely corrosion resistant, bronze plated suspension and load hooks, solid bronze trolley wheels rubber buffers chain containers.

Spark Resistant Chain Hoist With Integral Geared Trolley. This product is the YaleLift 360 Atex hand chain hoist with chain driven trolley provided with the following for extra spark Protection; stainless steel hand chain and zinc plated load chain. The hoists are completely corrosion resistant with bronze-plated suspension and load hooks and solid bronze trolley wheels. Yale has also fitted Rubber Buffers and the addition of a chain container. Please note that it is the responsibility of the user to identify the explosion proof classification required, NOT the hoist manufacturer or the supplier.
Steel Jack with permanently fitted lifting toe (reduced capacity on the lifting toe).

Yale SJ Mechanical Steel Jacks are available in the following sizes - 1500kg, 3000kg, 5000kg, 10,000kg.

Yale Steel Jacks are mechanical action jacks (no hydraulics) and are frequently used for assembly applications and to brace or support loads. A Mechanical steel jack can basically be used to lift almost any kind of load in maintenance and repair, ship building, construction as well as agriculture. The integrated carrying handle makes it a portable and versatile tool. The load can be positioned either on the head or the claw, and by turning the operating lever jack shaft moves up and down on the rack.

Malible iron (Bike chain) Pul-lift Lever Hoist.

Suitable Applications: Yale C85 Chain Lever Hoist. Almost unlimited applications in maintenance, mining, construction, steel fabrication, shipbuilding and utility work, oil and gas industries. Ideal for moving and spotting heavy machines and securing heavy loads, simplifies setting pipes, etc in manholes and trenches. Available in sizes 750kg, 1500kg, 3000kg, 6000kg and 10,000kg.

Spur Gear Drive Manual Wire Rope Winch. Suitable for use in areas where electricity is not available or where electric appliances can not be safely operated on account of water, mud or dirt.
Wind Turbine Chain Hoist by CM. Electric Chain hoist for use on Wind Farm. Capacity from 250kg to 1000kg.

Electro- dynamic braking eliminates heat generated by typical designs. Precision machined and hardened liftwheel: exact fit of chain in liftwheel provides smoother operation and reduces chain vibration, superior gear protection, lifetime lubricated.

Options on Wind Turbine Chain Hoist: Safe working load, voltage, Ph / Hz, suspension type, height of lift required (metres)

Wind Turbine Chain Hoist by CM. Electric Chain hoist for Windmill. Capacity of 250kg. Better control on long lifts: Smooth, slow speed starts and stops, fast speed for load transition. Variable frequency drive (VFD) option is also available on the Lodestar. Precision machined and hardened liftwheel: Exact fit of chain in liftwheel provides smoother operation and reduces chain vibration.

Options on 250kg Turbine Chain Hoist: Safe working load, voltage, suspension type, height of lift required (metres)

Suspension: Hook or trolley

Turbine Rope Hoist.

This item is designed specifically for use in wind turbines where items, components and tools need to be raised to the top of the column to allow maintenance. It has a fast lifting speed and is excellent quality by Yale.

Corrosion resistant hand chain hoist with stainless steel chains and integrated push trolley.

These hoists are all from the YaleLift 360 Models. The hoists/trolleys are fully corrosion resistant including the bottom hooks and are all fitted with stainless steel load and hand chain.

Available in with capacities of 500kg, 900kg, 1250kg, 2000kg and 4000kg.

Corrosion resistant hand chain hoist with stainless steel chains and integrated geared trolley.

These hoists are all from the YaleLift 360 Models. The hoists/trolleys are fully corrosion resistant including the bottom hooks and are all fitted with stainless steel load and hand chain.

Available in capacities of 500kg, 900kg, 1250kg, 2000kg and 4000kg.

Ultimate corrosion resistant hand chain hoist with stainless steel chains, hook suspended.

These hoists are all based on the YaleLift 360 Models. The hoists and trolleys are fully corrosion resistant, including the lifting hook and all units are fitted with stainless steel chains.

Available in capacities of 500kg, 900kg, 1250kg, 2000kg and 4000kg.

Spark Resistant, Quick Fit Push and Geared Travel (chain drive) Beam Trolleys. Yale ATEX Beam trolley for potentially explosive environments, EX, spark-proof. Corrosion resistant with rubber buffers fitted and solid bronze trolley wheels. Options as push travel and geared travel (chain drive). Can be fitted with track clamp for locking the trolley on to the lifting beam.

A beam trolley enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment. It has excellent controlling features due to machined steel wheels mounted on pre-lubricated, encapsulated ball bearings. All trolleys conform to ATEX Group II, surface. Category. Zone 1. Explosion group IIB. Temperature class T4(T3). The HTP/HTG SR beam runners are adjustable to fit a wide range of beam widths and profiles. The trolley wheels are designed for a max. beam profile incline of 14%.

Tigrip compact standard crane weighers with LCD display.

High accuracy load cells that are a lightweight design with easy-to-read large 20.5mm display. Easy to use and robust design, the housing can be rotated 180°. This crane weigher retains the peak value to memory and the battery capacity provides for around 200 operating hours. it has automatic setting to zero when crane weigher is switched on. Display of maximum weight (gross/net) and the display of measuring units at the load indicator, measuring units: kg, tonnes, lbs, and kN.

Tigrip compact crane weighers.

All the features of the Yale TKL, the TKR range are compact measuring devices for the weighing of loads that come complete with a radio remote control. Use appropriate attachments like grade 8 forgings between the hook of the hoist or crane, the crane weigher, and the load. They are very simple and straight forward to use! The display indicates overload at 110% of the rated capacity and the status of the battery.

Standard load cell with LCD display. Technical data on TZL load cells; Operation time, approximately 200 hours, temperature range when in operation -100C to +500C., IP 54 protection. Large 20.5 mm high LCD display (4.5 digits). Tare range is 100% of rated capacity and overload warning at 110% of the rated capacity. Automatic stand-by for a prolonged battery lifetime. Warning, if batteries are low and overload warning.
Weld-on Hooks with return spring catch.

A range of weld on hooks with 7 options from 1 tonne to 10 tonne SWL. Yale ASH Weld On Hooks are a universal attachments for use on trucks, excavators, low loaders, and spreader beams, etc. The hook and safety latch are epoxy resin coated for added corrosion protection and the return spring is made from stainless steel. The hook is welded in position then proof load tested after installation.

Yale ASH Weld On Hooks are available in the following sizes - 1t, 3t, 5t, 8t.

Solid forged and maintenance free, fixed wheel load moving skates.

The components of load moving skates can be universally combined and are ideal for transport of medium, heavy loads of all kinds. The components can be used individually or adapted into load moving system. Yale LF Load Moving Skates with Fixed Wheels  are available in the following sizes - 1000kg, 2000kg, 2500kg, 3000kg, 6000kg.

Load moving skates and systems with steerable wheels.

The components of the load moving skates can be universally combined and are ideal for transport of medium - heavy loads of all kinds. The components can be used individually or adapted into a load moving system. Maintenance free units made of a solid forged steel construction with an anti slip rubber lining. Available in two different models : LFL-1-2 has 2 fixed and 2 steerable wheels. LFL-1-4 has 4 steerable wheels. Maximum capacity of 1 tonne.

Single point full body, entry level harness, with rear attachment point. Conforms to EN361.

Yale Single point harness is provided with rear D attachment point and chest lock, also with an adjustment in the shoulder and leg area to provide easy and quick fit to the size of the user. One size only.

Extra large single point full body, harness, with rear attachment point. Fits chest size up to 52" to EN361.

Yale Extra large single point harness is provided with rear D attachment point and chest lock. can be adjusted in the shoulder and leg area to provide easy and quick fit to the size of the user, Available in XL only, fits chest upto 52".

Two point full body harness with front & rear attachment points. Conforms to EN361.

Yale Two point harness is provided with front and rear D attachment points and chest lock. Adjustments can be made to the shoulder and leg areas to provide easy fit to the size of the user. One size only.

Two point full body harness, front & rear attachment and points with quick connect buckles. EN361.

Yale Two Point Quick Connect Harness is made with quick connect technology enabling quick usage in the workplace. adjustments can be made to the shoulder and leg areas. Also has front and rear D attachment points and chest lock. One size only.

1.5 / 2 metre x 12mm fall arrest rope lanyard complete with 2 screw gate karabiner connectors.

Yale Fall arrest lanyard available in 1.5m or 2m with 12mm rope diameter and screw-gate connectors. Conform to EN354 and EN 355.

1.5 / 2 metre x 12mm fall arrest rope lanyard complete with 1 scaffold hook and 1 screw gate karabiner connector.

Yale fall arrest lanyards are available in 1.5m or 2m with 12mm rope diameter, with end fittings, 1 Scaffold hook and 1 Screw-gate connector. Conform to EN354 and EN355.

2 metre x 12mm twin leg rope lanyard complete with 3 screwgate connectors or 2 scaffold hooks & 1 screw gate connector.

Yale Twin Tail Fall Arrest Lanyard can come with two different end fittings - 1 Screw-gate Karabiner connector and 2 Scaffold Hooks 

Hydraulic single-acting universal hydraulic cylinder / jack with spring return. The product is a Yale Chromo design. The cylinder body and piston are made from quality chromium - moloybdenum steel and are also heat treated. It has a robust design with long piston bearings to withstand eccentric loading along with hard-chromium plated piston with replacement, heat treated saddle. 
Single-acting hydraulic hollow lifting / jacking cylinders with spring return. These products are Yale chromo-design, single acting with spring return, with a maximum operating pressure off 700 bar. Cylinder body and piston are made quality chromium-molybedenum steel and heat treated. Metric mounting threads at cylinder body and inside piston.
Light-weight, two stage electrically powered hydraulic power pumps.

The PY, portable hydraulic power pump is light-weight, yet powerful two stage pumps, and specifically designed for maintenance and repair jobs.

Hydraulic safety check valves for uses of applications where pressure drops. VSM safety-check valves.
Shut off valves to shut off hydraulic lines, especially in multiple cylinder systems.

These directional valves control the oil flow in combination with hydraulic power packs.

Integrated hydraulic puller kit. Yale BMZ Integrated Hydraulic Puller Kit are available in teh following sizes - 6t 8t 11t.

These professional puller sets are designed for removing and installing pressed fit parts. The pullers provide time cost savings, as they offer a high level of working safety and can be operated in all position.

Modular Hydraulic puller kit with two stage quick action hand pump and 2m hydraulic hose with quick coupler. Yale BMZ Hydraulic Modular Puller Kit are available in the following sizes - 10t, 15t, 23t.

Hydraulic pullers are an invaluable tool for the maintenance engineer. The pullers provide time and cost savings, as they offer a high level of working safety and can be operated in all positions.

 

Universal repair and maintenance sets provide hydraulic force for universal applications.
Hydraulic chain cutter deigned for safe and quick cutting of high tensile chains. Hydraulic chain cutter design for safe and quick cutting of high-tensile chains up to 16mm diameter. Suitable for grade 80 and grade 100 chains
Restraint kit with Certificate of conformity.

Yale restraint height safety kit comes with a single point harness, 2 metre restraint rope lanyard, 1 screwgate snap hook, 2 screw tape snap hooks, 1 kit bag and 1 certificate of conformity.

Work positioning retraint kit.

Yale Work Positioning Height Safety Kit Comes with : 1 four point harness, 2 metre work positioning device, a 2.2 metre webbing device, kit bad and a Certificate of conformity.

Crane Maintenance Kit.

Yale Crane Maintenance Fall Arrest Lanyard Kit Comprises of 1x two point harness, 1x 2 metre x 2 leg fall arrest lanyard with scaffold hooks, 1x Kit Bag and 1x certificate of conformity. 

Festoon cable system contains all the parts required to install a power cable supply. These Festoon cable systems have galvanised track and supports and system lengths from 3 to 30 metres.
Single rail lifting clamp designed to lift and transfer single rails securely and safely. The CR rail clamps are designed to lift single rails securely and safely. The clamp is designed to fit most types of rail section sizes currently in use. The clamp has a narrow profile to enable attachment to an individual rail that is stacked side by side with other rails. The clamp is locked onto the rail-head via a lever-operated spring mechanism. It is recommended to use clamps suspended from a lifting beam for long rail lengths. Clamps also can be supplied with a short length of chain and lifting eye.
Atex pneumatic chain hoist with suspension hook or with integrated trolley. With 100% duty rating and an unlimited number of starts the model CPA is suitable for heavy duty applications. It is insusceptible to contamination, humidity and aggressive mediums from the outside. The hoists are composed of three main components which makes service easy and inexpensive. The robust rotating piston has an adjustable spring pressure brake that holds the load secure even in the event of an air failure and a high starting torque due to switching valves in the motor body. Designed for operating pressure of 4 to 6 bar. Copper plated suspension and load hooks. Case hardened and zinc-plated link chain

 

Spur Gear Drive Manual Wire Rope Winch in Stainless Steel. (Rope not included) The HW-C has a winching housing and rope drum from robust steel plate for high versatility. Automatic load pressure brake for safe holding and extremely sensitive lowering of the load. The wire rope winch comes with a high visibility, yellow, powder coated finishes standard.
Aluminium Tripod, Extendable from 1.34m up to 2.3m with optional Man Riding Winch or Fall Arrest Inertia Reel Block Aluminium construction for ease of lifting, Adjustable from 1340mm fully retracted to 2300mm fully extended, Telescopic legs,  Supplied with security chain around the base, Stabilising feet with rubber grip. Yale is a top quality lifting and height safety equipment manufacturer, we are proud to offer to our customers the Yale Rescue tripod system for fall arrest and man riding applications. The tripod is made from light weight aluminium, it is height adjustable, the legs are telescopic and the whole tripod folds for storage and / or transportation. We offer the tripod certified to EN794 with a maximum capacity of 500kg though LiftingSafety also offer as a complete height safety set with man-riding winch (20 or 25m) or / and with a fall arrest inertia reel.
Locking and adjustment systems Yale work positioning lanyard otherwise known a a pole strap c/w Shortner (rope traveller). Available in 2 metre or 4 metre lengths and both fully adjustable c/w rope protector. 
Double action snap hook device to ensure it cannot be open accidentally with 60mm opening. The gate opening of the this snap hook means that this item is normally used for clipping directly on to a D ring on a harness. Usually fitted to fall arrest blocks of fixed lanyards. The double action snap closure on this device means that it cannot be accidentally opened. With 60mm gate opening
Steel Screwgate Connector used in a vast variety of applications such as rope access and fall arrest with 18mm opening. It is used in a vast variety of applications such as rope access and fall arrest. The screw gate closure on this device means that the user must manually lock the Karabiner after attachment to an approved anchorage point. With a gate opening of 18mm.
Steel Screwgate Connector used in a vast variety of applications such as rope access and fall arrest with 18mm opening. It is used in a vast variety of applications such as rope access and fall arrest. The user must manually lock the Karabiner after attachment to an approved anchorage point. With a gate opening of 18mm.
There is no description for this product, please click the 'View Product' button to find out more.
Kit box mainly for Harness and lanyard kits. Ridgegear Standard Kit Box is mainly used for harness and lanyard kits but can also have many other uses. Available in one size L310 x W410 x H180mm.
Suspension trauma safety strap helps prevent the effects of suspension trauma after a fall.
30m/min Limit The overspeed catching device is automatically tripped when the lowering speed of the cable exceeds 30m/min (0.5m/s).

The integrated clamping jaw mechanism made of hardened steel stops the lowering of the wire rope within a few centimetres.
5degrees catching limit. The inclined position catching device is automatically tripped when the angle of the rope or the platform exceeds 5°.

The integrated clamping jaw mechanism holds the rope and immediately stops the movement of the system.
Remote radio/wireless controls for most hoisting applications. 4 button or 6 button options.
New ergonomically designed, patent pending pull-lift with revolutionary crank handle.

Redefining lever-operated hoists, the YaleERGO 360 features the revolutionary Crank Handle that allows for efficient operation in both lifting and pulling applications. Ergonomically designed for increased safety, the patent-pending YaleERGO 360 lets the operator to work up to 12 times faster and with as much as 30 % less pull force than with conventional ratchet lever tools.

Three point full body harness, with front and side attachment points. Conforms to EN361/358.

Yale Three point harness consists of a padded back for optimal wearing comfort, and two lateral D rings for work positioning, also providing rear D attachment point and chest lock. Adjustment in the shoulder and leg area to provide easy and quick fit. One size only.

Four point full body harness c/w work positioning belt. Conforms to EN361 & EN358.

Yale Four Point Harness consists of a padded back for optimal wearing comfort, and two lateral D rings for work positioning, also providing front and rear D attachment point and chest lock. Adjustment in the shoulder and leg area to provide easy and quick fit. One size only.

Four point full body harness c/w work positioning belt c/w quick connect buckles. Conforms to EN361/358.

Yale Four Point Quick Connect Harness provided with ront and rear D attachment points, two lateral D rings for work positioning. with a padded back for optimal wearing comfort. Quick connect buckles enables you to attach or detatch the harness in a quick and safe manor. One size only.

Rescue harness with front and rear "D" attachment points and with added rescue anchorage point. Conforms to EN361 and EN1497.

Provided with front and rear ‘D’ attachment points. Additional rescue anchorage point conforming to EN1497. Adjustment in the shoulder and leg area to provide easy and quick fit to the size of the user.  Weight 1.5kg. Harness Conform to EN 361, EN 1497

Door Bar Fall Arrest & Restraint Door Anchor Certified to EN795. Yale Door Bar Fall Arrest & Restraint Anchor is up to the standard of CE EN 795 class B. This is very fast and easy to setup. Must be used adjacent to the door opening.
Rotating Hydraulic Machine Jacks. These jacks are presently in limited supply though we can supply almost identical lifting jacks if the product is not presently available. Tale rotating toe jacks have a 360 degree rotating body that enables access in the most confined spaces and Can be used in either the vertical or horizontal position. (on its side or inverted) Low acceptance height on the toe gives maximum flexibility (typically 25mm on the 5t and 10t models, 58mm on the 25t models. The pressure relief valve prevents system overload

For Use with cable pulling machines from all manufacturers.

Pulley blocks, hinged, with single steel sheave capacity 1000 - 6400 kg. One side of the Yale pulley blocks is hinged and can be opened for easy and quick positioning of the wire rope on the sheave. It can also provide a quick and versatile rigging point or redirect a wire rope.

Available in 4 different models with different capacities and rope diameter: 1000kg-7mm, 2000kg-13mm, 3200kg-15mm, 6400kg-18mm. Available with Optional extra of a Clevis fitting.

Aluminium lifting tripod at 3.3m when erected, 2m when collapsed. Optional hand chain hoist. Heavy Duty Aluminium Tripod designed for portability and great value for money, fully adjustable telescopic legs ideally used with a hand chain block or electric chain hoist. Tripod Features; Greater adjusting range due to telescopic legs than standard lifting tripods and fully Collapsible reducing the overall length to 2000mm for easy storage and transportation. The tripod feet are fitted with non-slip rubber-metal linings, guaranteeing stability.
Aluminium lifting tripod with hand winch at 3.3m when erected, 2m when collapsed. Heavy Duty alloy Tripod, excellent quality, made in Germany; a portable piece of lifting equipment supplied with a 25 metre height of lift hand winch. The cable is deflected over a pulley wheel. The tripod has fully adjustable telescopic legs that collapse to a length to 2 metre for easy storage and transportation. The tripod feet are fitted with non-slip rubber-metal linings, guaranteeing stability.
Load cell and remote and display on-board. The TZR load indicator can be operated by radio control. The displayed values can be taken off the remote control device and can be easily transferred to a PC. The system can be combined with an easy-to-read display. Several measured values can be totalled and saved.
Corrosion resistance, high tensile aluminium, alloy powder coated finish with low maintenance. Top quality made in the UK.

Lightweight, 2 piece, bagged davit system with WLL to 500kg, yet only 24kg fully assembled. Fully configurable through our "Buy / Quote" section.

Manriding or Materials lifting solution.

Adjustable Rear Load Moving Skate Machinery

LiftingSafety LS Basic Load Moving Skates are available in the following sizes - 6t or 12t.

These three point loading systems comprise of a pair of adjustable rear skates. The heavy load moving systems are supplied ready-to-use.

Replacement spare parts for any brand (including no longer trading) of overhead crane or hoist.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top