Search Results for "RidgeGear"- 100 items found
The RGA16E is supplied in 3 standard lengths 10, 20 and 30m, however custom lengths can be made up to suit the client's application. The RGA16E is used in conjunction with the RGA10 rope grab to provide vertical, or near vertical fall protection. The RGA16E is fitted with a spliced eye on both ends and is fitted with nylon thimbles. The hawser laid construction of the nylon rope, provides good shock absorption qualities and offers some resistance to alkali, oils and organic solvents.
The RGA12R is supplied in three standard lengths - 10m , 20m , and 30m but other lengths available upon request. The rope core is made of double twisted cabled yarns, which are possessed in several work processes that are coordinated with each other.
Ridgegear RGA11 Stainless Steel Wire Rope Grab For 8mm Cable is designed to provide vertical fall protection to an operative ascending or descending a ladder or structure. Only available for use with 8mm stainless steel wire rope. It should be directly connected to the chest attachment of a harness via a Karabiner, ensuring that the operative is held close to the structure.
Ridgegear RGA10 Guided Fall Arrester Steel Rope Grab is designed to provide vertical/inclined fall protection to operatives ascending/descending a ladder or structure. Only available with 16mm Hawser laid rope. This unit can be ordered with or without a shock pack that cannot be removed, however due to the “gate opening” method of attachment, the RGA10 offers positive closure and good jamming action.
Ridgegear RGA12 Guided Fall Arrester Kernmantle Rope Grab is designed to provide vertical/inclined fall protection to the operative ascending or descending a ladder or structure. Only usable with 11mm Kernmantle Rope. When used by itself, the RGA 12 should be connected directly to the chest attachment of a harness via a karabiner. This ensures that the operative is held close to the structure and in the event of a slip, the fall distance and loading on the top anchor is minimal.
The VRS has been specifically designed to be used from the point of fall and not requiring the rescuer to go over the edge, which gives extra-added safety. When the faller is raised the rescuer has a 5:1 mechanical advantage which reduces the effort required. The upper pulley wheels lock when the faller is being lowered. This increased friction allows the rescuer to lower the faller effortlessly. A rescue pole is used to ‘fish’ for the fallers’ harness rear attachment point.
Ridgegear RGH16 Multi Task Harness is a further innovation of the Ridgegear range of safety harness. For fall arrest the harness comprises front and rear D rings. In addition there is the added benefit of 2 side D work positioning D rings on a comfortable support pad, and a further ventral front D ring positioned at the waist for sit suspension and / or work positioning. Leg straps are opened using lightweight adjustable quick click buckles, which allow for easy and quick step-in facility. Comfort leg pads are also provided.
Ridgegear Webbing Lanyard and Shock Absorber is an industry standard, and normally the minimum equipment issued with a harness for working at height. The webbing used in the manufacture provides grater strength, wear and sheer resistance compared to other webbing. It is also treated with a water repellent coating which should extend the life of this product. Available in lengths of 1.3m and 1.8m.
Ridgegear heavy duty tripod storage bag is designed to safely store our RGR1 tripod. Has a full length top zip to assist with access, two carry handles which wrap around the bag for extra strength. Made with Abrasion resistant nylon.
Specifications - Accredited to: N/A. Material: P.U. Nylon Saturn Yellow.
Ridgegears heavy duty winch bag has been developed to give a safe storage for our popular man riding winch. Due to the weight of the winch the bag comes with a special wooden internal base which spreads the load. The zip is angled diagonally to give good access and ease of mounting onto the wooden base.
Ridgegear RGEMA1 Mobile Dead-weight Anchorage Fall Arrest System has been designed and tested to meet the requirements of EN 795 Class E dead weight anchor devices. Suitable for single person use with a maximum attached weight including all tools and clothing is 100kg. Depending upon which P.P.E, is used the system will either form part of a Fall Restraint or Fall Arrest system.
Ridgegear RGH1 Multi Function Harness or most application Front and rear ‘D’s for fall arrest and rescue Work positioning side ‘D’s allow for hands free working. New design of front chest ‘D’ mounted on O rings eliminates webbing stress areas and even distribution of forces in the event of a fall. Available in 4 sizes. Size A - < 31" waist, < 35" chest. Size B - 29"-38" waist, 33"-42" chest. Size C - 36"-45" waist, 40"-49" chest. Size D - 45"+ waist, 49"+ chest.
Ridgegear RGH18 Full Elasticated Harness with the introduction of elasticated webbing on the whole harness, the harness provides greater comfort and ease of donning. This harness is an entry level harness but having the advantage of elasticated webbing which allows for extra freedom of movement. In addition to the elasticated feature, the harness is fully adjustable and fitted with rip stitch indicators.
Ridgegear RGH31 Economy Single Point Harness has been developed for the user who requires a harness for a possible one off use or that the environment is particularly harsh requiring the harness to be replaced on a more frequent basis. The harness has adjustment on the shoulder straps and the leg straps
Ridgegear RGH35 Ladies harness is specially designed by ladies for ladies. The harness is manufactured with a high chest “V” and centre strap which fits comfortably between the breasts to limit any possible damage to the breast tissue in the event of a fall. The harness is supplied with a waist belt for additional comfort and quick connect leg adjustments to aid donning. Comfort leg pads are supplied as standard and shoulder pads can be supplied as an optional Extra.
This eye bolt has been designed to provide secure anchor points through steel structures. Designed to fit hole sizes 19 - 28mm, made from a high tensile steel aluminium. This is a temporary transportable eye bolt is a versatile anchor device, suitable for secure attachment to steelwork.
The RGR1 is a portable and lightweight rescue tripod which can be easily erected on site. It has adjustable lower and intermediate legs at 80mm intervals that enable the tripod to adapt and adjust to comfortably fit, levelling the tripod on uneven surfaces or varying ground conditions. Accredited to: EN795. Material: Aluminium cast and extruded legs and Fittings: EN795 attachment points. Weight: 17.6 kgs. Portable and universally adjustable. Height: Min 1.68m - Max 2.67m. Span diameter: 1.80m. Packed Length: 1.37m. SWL: 200kg.
The easy installation to any beam makes this a suitable fixing for any Fall Arrest System, it can be adjusted quickly to the beam width by turning the main spindle. Safety is ensured by the special locking lever.
Specifications Accredited to: EN 360 and EN 1496 A&B Cable spec: 15 x 5 galvanised steel wire rope (also available with stainless steel wire) Connector: Double action, high tensile steel alloy Weight: 11.35 Features: Fall indicating connector, retrieval system Size mm: L 340 x W258 x D 80 Max arrest force <6kN Approx arrest distance: 0.5m. Available with either a Galvanised steel wire rope or Stainless steel wire rope.
Ridgegear 15 metre Fall Arrest and Rescue Block With steady Handle has the benefit of an additional steadying handle. Like the RGA4, the RGA4H is a three way retrieval block fitted with an up/down winch mechanism and the standard fall arrest capability. This handle facility is most usefull when not solid mounted to a tripod or other structure. This unit can be used as a standard fall arrest block, but in the event of a fall, the operative can be winched up or down to safety almost immediately. Available in either Galvanised steel wire rope or Stainless steel wire rope.
Ridgegear 6m lightweight Fall Arrest Block is a lightweight and small multi purpose fall arrest block, which allows uninhibited movement during normal working activity. For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task. The cable can come in two different types - either 5mm Galvanized steel wire rope, or can come in 5mm stainless steel.
Ridgegear RGH4 4 Point Harness includes all of the features of the RGH1-3 harnesses, (see data sheets).This comfortable harness is designed for operatives who spend a lot of time working at height and in exposed areas. The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.
Ridgegear RGH5 Rescue harness is designed for use as a confined access harness. The front and rear attachment points can be used as standard fall arrest points and the rescue strap can be used for lifting and lowering. When used, the rescue strap keeps the operative in a near vertical position, which is preferred when recovering an unconscious casualty. The harness is fully adjustable and is fitted with rip stitch indicators.
Ridgegear RGH12 Two Point Quick Fit Harness has been developed in conjunction with the fire service. The speed and simplicity of assembly and adjustment makes this harness the ideal solution where rapid and simplistic donning is crucial. The waist and leg straps comprise ’quick click’ snap to buckles, which cannot be incorrectly assembled, and pulling down on the webbing tails easily tightens the front shoulder and chest straps. The additional waist strap and extra wide sit strap, provide added support and comfort during use and also whilst in suspension.
Ridgegear RGHE Economy Single Point Harness is the “budget” and extremely lightweight harness in our range. This harness is used primarily with a fall arrest lanyard to provide an operative with basic fall protection. The harness provides suitable adjustment.
This complete harness safety kit combines our famous RGH2 front and rear "D" harness and a rgl12 adjustable restraint lanyard supplied in a tough plastic storage case. This case provides protection when not using the equipment. The kit is designed to give maximum protection against vertical ejection from boom type hydraulic work platform. Specification - Accredited to: EN361 and EN354. Web material: 45mm water repellent polyester. Weight: 1.15 kg (harness only). Special features: Designed for use in MEWP'S
This kit is a economy kit. The kit comprises of our famous RGH2 front and rear "D" harness and a Rgl1 1.8m lanyard which comes complete with RGK1 karabiner. This kit can also be supplied in a strong case or a top quality rucksack. Specifications. Accredited to: EN361, EN354 and EN355. Web material 45mm water repellent polyester. Features: Front and rear attachment points. Special stitch indicator.
This complete harness safety kit is specifically designed with the scaffolder's in mind. The kit comprises of our famous RHG2 front and rear "D" harness and a RGL1 1.8m lanyard which comes complete with our ultra lightweight RGK11 karabiner. This kit can also be supplied in a strong case of a top quality rucksack. Accredited to: EN361, EN354 and EN355. Web material: 45mm water repellent polyester Weight: 1.15kg (harness only). Features: Front and rear attachment points. Special feature: Rip stitch fall indicator.
Ridgegear Kinetic Fall Arrest Lanyard in 1.3 or 1.8m, webbing material 26mm inner shock absorber webbing polyester 40mm 29kn outer webbing polyester.
These lanyards are compatible to any EN362 karabiners. The RGL20 only has these 2 components thus providing versatility, simplicity and negates the need for a separate bulky shock pack. The fall arrest force trace is a lot smoother than with conventional tear webbing, and the permanent elongation (displacement) is also less at approx 1.20 metres for a fail factor2. T
Ridgegear Kernmantel Lanyard is of traditional type, using 12mm kernmantle rope with machine stitched connection eyes at each end. The lanyard is fitted with a standard shock absorber pack, even though the rope itself has some shock absorbing capacity. The rope used in the manufacture of this lanyard, shows some resistance to alkali's, oils and organic solvents. Available in lengths 1.3m and 1.8m.
Ridgegear RGL3 Twin Leg Fall Arrest Lanyard allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. It is also treated with a water repellent coating which should extend the life of this product. This lanyard can be fitted with any compatible EN362 karabiner. Available as either 1.3 or 1.8kg.
The RGl4 is supplied in 450mm length and is usually used as an extension strap fitted to the D ring of a full body harness. Made with 25mm 40kN webbing in the manufacture of this product which provides greater strength, wear and sheer resistance compared to other webbing. Has a sewn loop eye on free end.
Ridgegear RGL5 Fall Restraint Lanyard is to act as a leash for an operative working at height to prevent possibility of risk of a fall. It is important to understand the principles of "fall restraint" as the RGL5 can only be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative falling, a fall arrest product must be used. Available in any length of upto 2m.
Ridgegear RGL6 Elasticated Fall Arrest Lanyard is a general purpose lanyard which can be use when the operative is working from a static position. The elastication in the lanyard reduces the amount of hanging slack in the lanyard, which can be helpful when working in tight spaces to help reduce trip hazards and entanglement. Available in Lengths of 1.3m and 1.8m.
Ridgegear RGL7 Standard Shock Pack is similar to the standard shock pack, which is fitted to all of the Ridgegear fall arrest lanyards. this unit is also fitted with a "back up" length of webbing for reassured strength and security. The transparent protective sleeve covering the unit, allows the user to visually inspect the condition before and after each use. Available in fully deployed length of 1.75m.
Ridgegear RGL9 Twin Leg Elasticated Fall Arrest Lanyard allows movement between anchorage points by means of double clipping. This system is generally used for tower climbing, steel erecting, scaffolding and maintenance on open structures. The elastication in the lanyard reduces the amount of hanging slack in the lanyard, which can be helpful when working in tight spaces to help reduce trip hazards and entanglement. Available with No End Fittings in both 1.3 and 1.8m, also available with 2 x 60mm double action scaffold snap karabiner - aluminium and 11mm Screw-gate delta link - steel. Available on both 1.3 and 1.8m.
Ridgegear RGL10 Special Mining Lanyard was originally designed for the mining industry, as the chain lanyard length provided protection against damage, due to falling debris. Although this is a heavy weight lanyard, once fitted, the user doesn't feel a marked difference to using other lanyards, this is due to the weight of the chain, it tends to keep away from the user whilst working. Available in standard length of 1.8m.
Ridgegear RGL12/2 Fall Restraint Lanyard is an adjustable restraint lanyard, and various lengths are available to act as a leash for an operative working at height. The adjust-ability of the product ensures that the correct length can be selected for the task in hand. It is important to understand the principles of 'fall restraint' as the RGL12/2 can only be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative stepping/falling over an exposed edge, or falling through a fragile surface, a fall arrest product should be used.
Ridgegear RGL14 Twin Leg Restraint Fall Arrest Lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. Movement between anchorages can be achieved by means of double clipping. The RGL14 is supplied 1.8 metre. No Hooks Supplied.
Ridgegear RGL16 Adjustable Twin Leg Fall Arrest Lanyard, When used in conjunction with two girder slings (RGK26), the RGL16 can be used as a means of progression through suitable structures where no fixed lifeline or eye bolts are available. The lanyard length can be adjusted to suit the application. The RGL16 is supplied standard length of 1.8m
Ridgegear Adjustable Twin leg Restraint Fall Arrest Lanyard length can be adjusted to suit the application. The additional benefit of adjust-ability allow for greater flexibility. Can be used for fall restraint, as there is no shock absorption built into the system. If there is any possibility of an operative steeping / falling over an exposed edge, or falling through a fragile surface, a fall arrest product should be used. Supplied: 1.2 - and 1.8m.
Ridgegear RGR8 Reciprocating Descender is a lightweight and easy to carry to the descent area, the RGR8 is supplied with rope measured to the exact height of descent (up to a height of 100m). The rope is supplied with two spliced eyes which can be fitted to either a rescue loop or a harness. It can also fit a combination wire/fibre rope which is a requirement for certain offshore installations. Available as either the Reciprocating Descender only or Reciprocating descender with rope.
Ridgegear have developed this protection to get over the problem of ropes going over the edges such as roof edges. The sleeve is wrapped around the rope and held in place with Velcro, then slide the sleeve into the contact point. Suitable for 11mm kernmantle rope.
This product has been developed to get over the problem of ropes going over edges, such as roof edges. The sleeve is slit in a spiral format which allows you to wrap around the rope and is automatically held in place by friction, you then slide the sleeve to the contact point. Suitable for a 16mm nylon rope.
This eases the discomfort to the user whilst suspended from a lanyard after a fall. The leg straps of a conventional harness do not prevent the webbing straps from cutting into the groin area during suspension, and loss of circulation to the legs and feet is often likely. This can be fitted to all Ridgegear harnesses.
Ridgegear Xcalibre 10m Fall Arrest Block s the ultimate answer in safety when working at low levels due to its unique rapid breaking system (RBS). Super light and finished with a sleek, compact and contemporary design, there is an Xcalibre block that will meet and exceed your expectations. This block is available with galvanised / stainless steel wire, webbing and dyneema.
Features - Accredited to: EN360, AS/NZS 1822.214.171.1247 and ANSI. Connector: Alloy swivel c/w load indicator. Material: Composite moulding UV stabilised. Features: Optional carry handle. Size mm: Various. Max arrest force: Webbing 3,2kN dyneema 3.0kN wire 3,5kN, 2m
Ridgegear RGA14 Guided Fall Arrester Aluminium Rope Grab is designed to provide either fall arrest or restraint protection depending on which system is specified. Also currently used in the rope access industry. The RGA14 is for use with 10.5 - 12.7mm kernmantle rope.
Ridgegear Adjustable Fall Arrest single leg Lanyard is an industry standard, and normally the minimum equipment issued with a harness for working at height. The 40kN webbing used in the manufacture provides greater strength compared to other webbing and systems. This lanyard should be used when the operative is working from a static position, connected to a fixed anchor point. The lanyard is available 1.2 to 1.8m. NO HOOKS SUPPLIED.
Ridgegear Work Positioning Belt with Gear Loops is fitted with two side mounted D rings for ease of attachment and the back pad provides some lumber support and comfort, especially when tools are hung from the belt loops. The RGB2 is normally used in conjunction with an RGL5 restraint lanyard, or a rope and grab system. The uses for this restraint belt are similar to the RGB1, however to prevent the user from dropping tools from height, all tools can be secured to the gear loops by a cord lanyard and also clipped to the belt when not in use.
Ridgegear RGR11 Rescue Stretcher comes equipped for hoisting by helicopter in horizontal position or hoisting in vertical position in caves or industrial confined spaces. When the patient is packaged the stretcher becomes rigid. Kit includes - Sked stretcher, Cordura backpack, Horizontal lift slings (pair), Sked tow strap, Removable webbing handles, Steel locking D karabiner, Sked vertical lift sling and a storage bag.
Ridgegear RGR9 Auto Descender is used in conjunction with an escape harness or rescue sling. Also is one of the smallest automatic escape devices in the world. Self rescue apparatus by means of which, one or more persons ( one after the other) can be lowered and a controlled speed.
Ridgegear Mini Fall Arrest Block is a retractable mini web block ideal for personal issue to operatives working at height. The unit is designed to be connected, and worn directly on a fall arrest harness. Has an almost instant "lock off" in the event of a fall, and recoils into the drum when slack is introduced into the lanyard. The reduced trip hazard and compact design make this unit ideal for tight work and tasks where a shorter arc of mobility is required.
Ridgegear 5m Fall Arrest Block is a compact, robust yet lightweight fall arrest block. This unit does not have an integral handle, but is fitted with an alloy swivel eye for connecting to an anchorage via a Karabiner. As a general purpose fall arrest block it has proved itself in the industry. Using webbing rather than wire this enables work around in and around fragile components - Aircraft industry and Glass lined vessels.
Ridgegear 10m Fall Arrest block is a multi purpose fall arrest block, which allows uninhibited movement during normal working activity. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a karabiner. For self-connecting to the block, it is recommended that the operative uses an extension strop (RGL4) in order to ease the task.
The RGA2 has a working length of 10 metres which is available in either 5mm Galvanised steel or a 5mm Stainless steel.
Ridgegear RGA3 15 Metre Wire Fall Arrest Block is a robust fall arrest block with a long working length and heavier construction. The carrying handle is part of the cast alloy housing and can be connected to the anchorage point using soft slings or a Karabiner. The RGA3 has a working length of 15 metres with the availability to come with 5mm Galvanised steel wire rope or 5mm Stainless steel.
Ridgegear RGH2 Two Point Harness is the workhorse of the industry. The harness is fitted with a rear dee and a chest mounted front dee. This harness can be used similar to the RGH1 but has the added feature of the front dee ring to extend the working capability of the harness. The harness is fully adjustable and lightweight and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.
Ridgegear RGH3 3 Point Harness combines the basic fall arrest harness with a comfortable work-positioning belt in one unit. The harness is fitted with a rear dee and two side dee rings mounted to the belt. In certain circumstances, the side dee’s on the RGH3, can be used for work restraint in the horizontal plane. The harness is fully adjustable and is fitted with rip stitch indicators.
Ridgegear RGH9 Front and Rear D Elasticated Harness provides additional comfort and support during use.This harnesshas the added feature of the front dee ring to extend the working capability of the harness. Utilizing the front dee, the harness can be fitted with a rope and grab systemfor vertical fall protection when an operative is making repeated ascents or similarly, when restraint/work-positioning is needed in either the vertical or horizontal plane. In addition to the elasticated feature, the harness is fully adjustable and fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied to the front dee ring.
Ridgegear RGH32 Budget Two Point Harness is still manufactured to our very high standards but does not have fall indicators and uses a more economic connection system.The front attachment is by means of webbing loops. The harness is fully adjustable and is fitted with rip stitch indicators. The ring connection between the chest & the shoulder straps, ensure no stress loading when force is applied the front dee ring.
Ridgegear RGL11 Utility Lanyard is fitted with triple action Karabiner for added safety Triple action hook provides quick and extra safe connection to harness 'D' ring and double action on outer end allows for quick connection to approved EN795 anchorage point., Can be attached direct to suitable anchorage point or can be chocked around pole or similar structure. Available in one length of 1.7m. Available with different hook / karabiner options as required.
The RGK1 is the workhouse of the industry, used from rope access, to fall arrest applications. This item is also used in the leisure industry for caving and rescue. The screw gate closure on this device means that the user must manually lock the RGK1 after fitting. With 17mm gate opening. Accredited to EN362.
The RGK2 is an extremely safe karabiner to use, as it takes user intervention out by locking automatically. Similar to the RGK1 in size and weight, the RGK2 is ideal for lanyards and aid climbing. With 17mm gate opening. Accredited to EN362.
This heavy weight karabiner is primarily fitted to the ends of fall arrest lanyards, due to its high MBS. The twistlock closure makes this karabiner extremely safe to use, as it locks automatically when it is clipped into anchorage point. With a 22mm gate opening. Accredited to EN362.
The RGK4 is a lightweight version of the RGK3 carrying a lower maximum breaking strength. Although this item can be fitted to fall arrest lanyards, it is also used in conjunction with relay devices and rescue industries. With a twist lock auto closure and a 25mm gate opening. Accredited to EN362.
The large gate opening of the RGK5 makes it ideal for use in industrial areas. The use of this Karabiner often negates the use of a sling as it can connect directly to steelwork. It's often fitted to double lanyards for climbing masts and steel structures. This Karabiner is fitted with a twist lock closure and removable pin to enable retro fitting to lanyards. With a 55mm opening. Accredited to EN362.
The RGK6 is a lightweight version of the RGK5. This device can be fitted to fall arrest lanyards, but is normally seen connected to ropes and used with rope grab systems to provide vertical protection. Used throughout the industry as part of a protection system on portable ladders. It also has a removable pin to enable retro fitting to lanyards. With a 55mm gate opening. Accredited to EN362.
Not strictly a karabiner, the RGK7 is an attachment device with a wide gate opening, ideal for use in industrial areas. The use of this karabiner often negates the use of a sling as it can connect directly to steelwork and is most often fitted to lanyards for working on steel structures. It has a self-spring type closure with an 105mm gate opening. Accredited to EN362.
Not strictly a karabiner, the RGK8 is an attachment device with a wide gate opening, ideal for use in industrial areas. The use of this karabiner often negates the use of a sling as it can connect directly to steel work. Most often fitted to lanyards for working on steel structures. With a gate opening of 140mm, with a closure type that is self-spring. Accredited to EN362.
The RGK9 is an aluminium captive eye karabiner normally fitted to fall arrest lanyards or restraint belts. Only manually lockable due to the Screwgate closure. With an added advantage of being permanently attached to the lanyard. With a 22mm gate opening. Accredited to EN362.
The gate opening of the RGK10 means that this item is normally used for clipping directly on to a D ring on a harness. Usually fitted to fall arrest blocks of fixed lanyards. The double action snap closure on this device means that it cannot be accidentally opened. With 20mm gate opening. Accredited to EN362.
The RGK11 is a large gate opening, aluminium captive eye karabiner, normally fitted to fall arrest lanyards for quick clipping. The double action snap closure on this device means that it cannot be accidentally opened but allows for speedy one handed operation. With a 60mm gate opening. Accredited to EN362.
The true industrial connector, the RGK12 is normally used on the operatives’ end of a shock pack or lanyard. This provides a semi-permanent connection to the fall arrest equipment. This item has many applications in the rope access and leisure industries. With an 18mm gate opening.
This triple action karabiner is one of the safest in the industry. In order to open it, the operator has to lift the barrel, then twist and finally open the sprung gate. In addition to the super safe properties of this karabiner, it also has the benefit of super strength. With a 24mm gate opening. Accredited to EN362.
The RGK13 is a stronger alternative to the RGK1. It is used in a vast variety of applications such as rope access and fall arrest. The screw gate closure on this device means that the user must manually lock the RGK13 after attachment to an approved anchorage point. With a gate opening of 14mm. Accredited to EN362.
The RGK 17 is an extremely lightweight alloy steel, double action snap hook. Used in preference to other karabiners / snap hooks where weight is of extreme importance. With an 18mm gate opening. Accredited to EN362.
The RGP1 is a pole strap / work-positioning device, designed to be clipped to the side Dee's of a harness or work-positioning belt. The adjuster is easy to use "one handed" either under tension or not. The 16mm hard lay rope is additionally protected by a cordura sleeve in the work area, to offer some protection against abrasion and extend the life of the product. The 2m length of the RGP1 allows the user enough freedom of movement, without being exposed to a fall.
The RGP2 is a pole strap/work positioning device, designed to be clipped to the side D's of a harness or work positioning belt. The stainless steel easy slide adjuster is easy to use one handed either under tension or not, leaving the other hand free to hold on. Available in a 1.4m length.
The RPG3 economy is a pole strap / work positioning device, designed to be clipped to the side dees of a harness or work positioning belt. The adjuster is easy to use "one handed" either under tension or not. The 45mm webbing, is protected by a wide pad in the work area, to offer some protection against abrasion and extend the life of the product. The 1.4 metre length of the RGP3 allows the user enough freedom of movement, without being exposed to a fall.
A very lightweight and portable rescue tripod which can be set up by a single and is available in two different working height. As standard it features non-slip rubber feet, with spiked edges and fitted safety chains. The leg has an integrated mounting bracket for a self-retracting lifeline or a winching device. Very lightweight and portable with a single person set up. 2 options at different working heights and avaliable with non-slip rubber feet, spiked edges, safety chains as standard, leg mounting bracket for a self retracting lifeline, or a winch. Maximum working capacity of 160kg.
The RGH1 Single Point Harness is a basic access harness fitted with a rear dee only. This harness is used primarily with a fall arrest lanyard to provide an operative with basic fall protection. The harness is fully adjustable and lightweight and is fitted with rip stitch indicators.