JDN "Profi TI Subsea" Pneumatic Air or Hydraulic Chain Hoist - For Use Under Water - 3200kg and 6300kg

Product Images - (Mouse-over). Note: Some images may be for display purposes only and not necessarily included as standard.

JDN Subsea Air Hoiste

JDN Subsea Air Hoist

Hook suspended, subsea pneumatic / hydraulic chain blocks.

Features

Designed to meet the extreme demands of the offshore oil and gas industry, a totally unique product range for lifting equipment  under water at depths of up to 70 metres and loads up to 6.3 tonne. Unlike other air and hydraulic hoists our units operate with the whole hoist submerged, not simply the hoist and load chain.

• Pneumatic / compressed air or arriving shortly our range of hydraulics sub sea hoists.
• 3 or 6 tonne SWL as standard - contact our sales department for other capacities!
• Variable speed control.
• Overload protected as standard.
• Standard units can be used to a depths of 55 metres.
• Special applications can be supplied be used down to a 70m water depth.
• Hook suspended super versatile tool.
• Also for horizontal and oblique use.

Please see below the technical specification for the 3 and 6 tonne compresses are subsea hoist. The Hydraulic sub-sea hoists are at the later stages of development; we will release the hydraulic technical spec in the near future.

Pneumatic Hoist Technical Specifications

* at an air supply hose with a length of 138 ft / 42 m

Dimensional Specifications

Dimension	Measurement Unit	Dimensional Drawing	Profi 3TI - Subsea	Profi 6TI - Subsea
A	inch		23.3	26.5
	mm		593	674
B	inch		14.7	17.9
	mm		373	454
C1	inch		11.8	11.8
	mm		300	300
C2	inch		17.9	17.9
	mm		455	455
D	inch		29.7	29.7
	mm		755	755
E1	inch		1.6	1.6
	mm		40	40
E2	inch		1.2	1.6
	mm		30	40
F	inch		7.4	6.1
	mm		187	154
G	inch		9.2	9.2
	mm		233	233