Other Lifting Hooks
Crosby A-350N Sliding Choker Hook - Range from 1130kg - 6750kg
Product Images
Our Crosby A350N Sliding Choker Hoist Hooks are the new style and incorporate throat opening equal to or larger than old style hooks. Each product has a Product Identification Code (PIC) for material traceability, and the name Crosby or "CG" forged into it. All hooks incorporate Crosby's QUICK-CHECK marks to help in determining if throat opening dimension has changed. Each hook can be equipped with a Crosby S-4320 heavy duty stamped latch with the high cycle, long life spring.
- Model: Crosby A-350N
Crosby BL-PKU Double Ended Hooks - Range from 1500kg to 3600kg
Product Images
Crosby BLPKU Double Ended Golden Gate Hooks make conductor tensioning faster and easier and are suitable for frequent rotation under load. Use in a corrosive environment requires shank and nut inspection in accordance with ASME B30.10-1.2.1(b)(2)(c)2000.
- Model: Crosby BL-PKU
Crosby BH-313 Weld-On Hooks with Safety Latch - Range from 1000kg - 10000kg
Product Images
Our range of Crosby BH313 Weld-On Hoist Hooks have a wide range of sizes available: 1-10 Metric Ton capacity, they are forged alloy steel and are designed for attachment to mobile lifting equipment to provide a pick point for easy sling attachment and have a large weld pad. Heavy duty latch interlocks with the hook tip. Replacement latches available. Detailed installation and application instructions are included with each hook
- Model: Crosby BH-313
Yale ASH Weld On Hooks - Range from 1000kg to 10000kg
Product Images
A range of weld on hooks with 7 options from 1 tonne to 10 tonne SWL. Yale ASH Weld On Hooks are a universal attachments for use on trucks, excavators, low loaders, and spreader beams, etc. The hook and safety latch are epoxy resin coated for added corrosion protection and the return spring is made from stainless steel. The hook is welded in position then proof load tested after installation.
Yale ASH Weld On Hooks are available in the following sizes - 1t, 3t, 5t, 8t.
- Model: Yale ASH
RUD "WPPS" Weld Down Swivel Lifting Point, Clevis Connector Fitted With Lifting Hook - Range from 630kg to 8000kg
Product Images
Lifting points for welding with a universal connection for every slinging means (hook and ring assemblies, endless sling chains, round slings, loops, etc): Provided with a double ball-bearing which enables jerk - free tilting, swivelling and turning. The optimised design avoids the damaging of both the slinging means and the precious load when swivelling. Version WPP-S:
- Model: RUD WPP-S
Weld Down Hook - Range from 1500kg to 6500kg
Product Images
Mounting hooks as lifting point at cross bars, for wire slings, round slings and sling- and lifting means with eye and oval ring.Stable hook securing same as the Cobra hook VCGH.
- Model: WDH-60
RUD "VCGH" & "VABH" Bolt On Excavator Hook - Range from 6000kg to 22,000kg
Product Images
Excavator hook used as a lifting point for wire rope slings, round slings and lifting means with an oval suspension ring or eye. With a stable hook securing mechanism comparable to that of the VCGH.Min. bolt quality is 8.8. Only the provided crack detected bolts should be used.The surface is pink powder coated.
- Model: RUD VCGH / VABH
Weld On Hook - Range from 1000kg to 10000kg
Product Images
The Yoke Excavator hook is a lifting hook that can be welded on to any suitably strong enough steel anchorage - remember, the supporting structure must also be strong enough and stable enough to support the load to be lifted.
- Model: YX
