Miller Work Positioning and Restraint Belts

Work Positioning Belt 2xD can be used independently for restraint applications or in conjunctions with a suitable fall arrest harness for work positioning techniques.

Miller MB00 Work Positioning Belt comes with 2 side D's and tool rings in order to attach tools safely. Available in sizes S, M/L. Can be used independently for restraint applications or in conjunctions with a suitable fall arrest harness for work positioning techniques.

Restraint Belt 2 Side D's, 1 Rear. Is Available in S, M/L sizes.

deal for comfortable hands-free work positioning at heights. 100mm wide padded belt with quick-adjustment buckle. 2 large side D-rings for use with positioning lanyard. Allows good freedom of movement. Harness or Belt? A work-positioning belt is considered as restraint equipment and should only be used without a harness when there is no risk of a fall. If a fall hazard exists the belt should either be fitted to a harness, or a harness incorporating a belt should be used.

The belt can be fitted with shoulder straps to relieve the load on the user's hips when heavy tools are hanging from the belt. Heavy-duty leather belt for intensive use in harsh environments. 180mm leather back pad for increased comfort and durability during work positioning. Quick-adjustment buckle. Loops for tools and accessories. Harness or Belt? A work-positioning belt is considered as restraint equipment and should only be used without a harness when there is no risk of a fall. If a fall hazard exists the belt should either be fitted to a harness, or a harness incorporating a belt should be used.