Miller Fall Arrest Height Safety Accessories

Quick Ref: CN-1689
Miller Fall Arrest Height Safety Accessories

Trauma Relief Step, pack of 12 pairs. Will prevent suspension trauma after a fall. Simply step in to it like a horses stirrups. Improves circulation, balance, comfort and control; most importantly gives valuable extra time for the rescue to be initialised. This is easy to deploy and use.

 

Troll Miller Black Rope Protector.

This is a PVC reinforced rope protector, designed to protect the rope against abrasion and cutting of the rope on, for example, building or rock edges. Easy fitting with velcro seam.

Tool Wrist Lanyard

This is designed so that, when performing jobs at height, workers don't lose grip, reduce the job efficiency and potentially cause serious injury to workers below. This holds the tool and connects to the wrist so this can be stopped and the chance of injury or bad work is sufficiently reduced. The maximum tool weight is 2.5kg.

Tool Lanyard.

When performing jobs at height, workers can sometimes lose their grip. Tools are often dropped, reducing on-the-job efficiency and potentially causing serious injury to workers below. With Bandit tool lanyards this doesn't have to be the case. In accordance with the work at height regulations 2005, every employer should take suitable and sufficient steps to prevent the fall of any material or object. Available in quantities of 12 or 36. This can be attached to all of our work positioning belts.

Edge Protection Roller, to protect rope from damage deflecting over a wall / edge etc. Connect many together!

This edge protection roller is designed to protect the rope when used on abrasive edges. With a 50mm wide roller allowing the simultaneous use of three ropes. Highly durable stainless steel shaft and brass bearings. Many can be joined together.

Lock Automatic Belay System.

Miller ABS lock automatic belay system is used to belay from the ground to the person equipping a structure with temporary anchor points.

Miller 23mm Yellow Webbing Lanyard Designed to connect/disconnect to Anchorage Point without Assistance, Complies to EN354.

Lightweight, versatile restraint and fall arrest lanyards are designed for maximum protection. They are adapted for work that requires limited movement and where there is a sufficient potential fall distance. The Miller MD50 is a webbing extension for use on a harness' rear anchorage, which in turn allows the user to connect or disconnect to a fall arrest system without the need for any assistance.

Miller 12mm Polyamide Rope Lanyard for use with MicroLoc Rope Grab, Complies to EN354.

Short Connection Fall Arrest and Restraint Lanyards are lightweight, versatile restraint and fall arrest lanyards designed for maximum protection where limited movement is acceptable and where there is a sufficient potential fall distance. This is fitted with a galvanised steel connector (CS20), with an 18mm opening, for use with the MicroLoc rope grab. Accredited to EN354.

Miller 25mm Polyester Webbing Lanyard for use with MA08/MA58 Harness Front Anchorage, Complies to EN354.

Short Connection Fall Arrest and Restraint Lanyards are lightweight, versatile restraint and fall arrest lanyards designed for maximum protection where limited movement is acceptable and where there is a sufficient potential fall distance. This is designed to be used only with the Miller MA08 or MA58 Harness front anchorage system; it is fitted with two Karabiners to enable easy and safe connection. Accredited to EN354.

LiftingSafety uses cookies to improve your user experience,
To accept this, please click the 'accept' button below.

Top